DESCRIZIONE PRODOTTO
320 Watts Single Output with active PFC Series
(English)
320 Watts Single Output with active PFC Series
Ci spiace, ma questo articolo è disponibile soltanto in Inglese Americano. Per ragioni di convenienza del visitatore, il contenuto è mostrato sotto nella lingua alternativa. Puoi cliccare sul link per cambiare la lingua attiva.
320 Watts Single Output with active PFC Series
(English)
MODEL | IT-EMC-320PFC-12II | IT-EMC-320PFC-24II | IT-EMC-320PFC-36II | IT-EMC-320PFC-48II | ||
---|---|---|---|---|---|---|
OUTPUT | DC Output | 12V | 24V | 36V | 48V | |
Rated Current | 25A | 13A | 8.9A | 6.7A | ||
Current Range Note 1 | 0~25A | 0~13A | 0~8.9A | 0~6.7A | ||
Ripple and Noise | 0~65C | ≤200mV | ≤150mV | ≤200mV | ≤150mV | |
Note 2 | -20~0C | ≤250mV | ≤200mV | ≤200mV | ≤200mV | |
Voltage ADJ. Range | 10~15V | 20~27V | 32~40V | 42~53V | ||
Voltage Accuracy | ±2.0% | ±1.0% | ||||
Line Regulation | ±0.5% | |||||
Load Regulation | ±2.0% | ±1.0% | ||||
Set-up Time | ≤2S (230VAC input, Full load); ≤4S (120VAC input, Full load) | |||||
Hold up Time | ≥10mS (120/230Vac input, Full load) | |||||
Temperature Coefficient | ±0.03%/℃ | |||||
Overshoot and Undershoot | <5.0% | |||||
INPUT | Voltage Range | 90Vac~264Vac,120Vdc~370Vdc | ||||
Frequency Range | 47Hz--63Hz | |||||
Power Factor(Typical) | PF > 0.98/120VAC PF > 0.95/230VAC | |||||
Efficiency ( Typical) @ 230Vac | ≥84.5% | ≥87% | ≥86.5% | ≥87.5% | ||
AC Current (max.) | < 4.5A | |||||
Inrush Current (Typical) | <50A@220Vac <30A@110Vac Cold start | |||||
Leakage Current | Input—output: ≤0.25mA Input—PG: ≤3.5mA (input 264Vac, 63Hz) | |||||
PROTECTION | Over Load | 27~35A | 14.5~19A | 9.345~13.35A | 7.3~10A | |
Protection type: Hiccup mode, auto recovery | ||||||
Over power | 324~420W | 358~456W | 336~480W | 350~180W | ||
Protection type: Hiccup mode, auto recovery | ||||||
Short Circuit | Long-term mode, auto recovery | |||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-20℃~65℃; 20%~90%RH No condensing(refer to the derating curve) | ||||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||||
Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X,Y, Z axes | |||||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||||
(Note 3) | Withstand Voltage | Primary-Secondary: 3.0KVac/10mA .Primary-PG: 1.5KVac/10mA. Secondary-PG: 0.5KVdc/10mA. | ||||
Isolation Resistance | 10M ohms | |||||
EMI Conduction & Radiation | Compliance to EN55022, EN55024, FCC PART 15 Class B | |||||
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | |||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||||
Dimension (L*W*H) | 199×99×50mm | |||||
Packing | 12PCS/CTN, 11.6KGS, 0.04CBM | |||||
Cooling method | Cooling by forced air (built-in DC fan) |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor.
4-ports 10/100Base-T(x) (POE) + 4-ports 10/100Base-T(x).
IT-IPS-318-IU-4-POE is an industrial grade, unmanaged PoE switch. The switch provides 4 ports 10/100 Base-T(x) PoE and 4 port 10/100Base-T(x) Ethernet, that PoE port supports POE function (IEEE802.3af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x/ with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, the -40~75℃ working temperature, can meet all kinds of Industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.
IT-232-CAN is used for data exchange between CAN-Bus field bus and RS-232 bus interface converter, and supports Modbus RTU protocol. IT-232-CAN interface converter integrated a RS-232 channel and a CAN-Bus channel can be easily embedded using RS-232 interface for communication nodes, do not need to change the original hardware architecture enables the device to obtain the CAN-Bus communication interface, to achieve between the equipments of RS-232 and CAN-Bus network connection and data communication. RS-232 channel IT-232-CAN devices to support a variety of baud rate, the range is 300bps~115200bps. CAN-Bus channel support CiA recommended a variety of standard baud rate and user-defined baud rate, the range of 2.5Kbps~1Mbps. IT-232-CAN interface converter provides three types of data conversion: transparent conversion, encryption conversion and Modbus protocol conversion. Its exterior design supports DIN-Rail mounting and Wall mounting, which is convenient for engineering application. The board comes with a photoelectric isolation module, complete electrical isolation control circuit and CAN-Bus communication circuit, so that the IT-232-CAN converter has a strong anti-interference ability, greatly improving the system in the harsh environment of the use of reliability.
4-ports 10/100Base-T(x) (POE) + 2-ports Gigabit Combo.
IT-IPS-316-IU-2GC-4-POE is an industrial grade, unmanaged Ethernet switch. The switch provides 4 ports 10/100M Ethernet and 2 ports combo Gigabit SFP slots or 10/100/1000Base-T(X) ports, which 4 ports Ethernet supports POE function (IEEE802.3af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The -40~75℃ working temperature, can meet all kinds of Industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.
Specially designed for UAV, UAS, DRONEs with weight less than 160g, real time temperature measurement & store 16 bit fully radiometric IR-video into SD card while flying it provides leading-edge imaging performance and reliability in an affordable, compact, lightweight package.
View the object of interest with thermal vision.
With ThermalTronix TT1640S-UAV you will get all the thermal imager you need for UAV, UAS, DRONEs operations without having to pay for functionality you’ll never use.