Switch Ethernet
6-ports 10/100M Ethernet + 2-ports 100Base-FX(SC/ST) + 2-ports gigabit (SFP) slot) Managed Industrial Ethernet Switch.
The IT-ES7110-IM-2GS-2F is an industrial grade, managed and redundancy Ethernet switch. It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring, fault alarm and firmware upgrade online. SW-Ring™ can bring your Ethernet to intelligent redundancy.
Standard Industry design, can satisfied every requirement of the industry scene. All components used industry grade, it takes products high reliability. It provided wide voltage power supply input. SWRing™ is designed as a rapid redundancy network arithmetics . It provided recover technology for fault of rapid redundant network, the recovery time<20ms.
16 Ports Managed PoE Switch.
The 16 Ports Smart PoE Switch, with 16 100Mbit RJ45 ports, 2 Gigabit Copper/SFP Combo uplink Port, model IT-ES100-PM-16S-POE, reduces equipment and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras.
Boost office efficiency and reduce network congestion with a total switching capacity of 7.2Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Supports 24 ports of 802.3at/af-compliant Power over Ethernet with a total power supply of 250W.
24 + 2 10/100Mbps Web Smart Managed PoE Switch.
The 24 ports web-smart PoE Switch, with 24 100Mbit RJ45 PoE ports, 2 Gigabit Combo port, model IT-ES100-PM-24S-POE, reduces equipment and installation costs by delivering data and power over existing Ethernet cables (CAT5 cable) to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 8.8Gbps.
LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with IT-ES100-PM-24S-POE to install non-PoE devices in remote locations.
16 Ports 10/100Mbps + 2 combo Ports Unmanaged PoE Switch
The 16 Ports Unmanaged PoE Switch, with 16 100Mbit RJ45 ports, 2 Gigabit SFP and 2 Gigabit Uplink, model IT-ES100-PU-16-POE, reduces equipment and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 7.2Gbps.
LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 25.5Watts to single PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with IT-ES100-PU-16-POE to install non-PoE devices in remote locations.
24 Ports 10/100M Unmanaged PoE Switch.
The 24 Ports Unmanaged PoE Switch, with 24 100Mbit RJ45 ports, 2 Gigabit Copper/SFP Combo uplink Port, model IT-ES100-PU-24-POE, reduces equipment and installation costs by delivering data and power over existing Ethernet cables (CAT5 cable) to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 8.8Gbps.
LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with IT-ES100-PU-24-POE to install non-PoE devices in remote locations.
8 Ports 10/100Mbps PoE Switch
This 8 ports 10/100Mbps PoE switch is with 60W external power, it provides a easier installation way for PoE devices, such as IP cameras, wireless AP, VoIP. And it can detect your PoE devices according to PoE standard. So the users do not need to worry about the PoE switch will damage their PoE devices.The max transmission distance is 100 meters with Cat5 cables. Ideally, shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss. Plug & play design make the installation quite easy, users do not need any configuration, which make this PoE switch a very good choice for IP cameras, wireless AP, VoIP users.
8 + 1 Ports Unmanaged PoE Switch.
IT-ES100-PU-81A-POE Series PoE Switch automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs), it’s 9 10/100Mbps Auto-Negotiation RJ45 ports with 8 PoE (Power over Ethernet) ports, the distance of power supply is 100 Meter.
There is no need to worry about the damage of standard POE or Non-POE Devices, it will be power off when the POE Device is not connecting. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
8 Ports 10/100Mbps Unmanaged PoE Switch.
The 8 Ports 10/100Mbps PoE switch with 48V/2A external adapter power, provides a easier installation way for your PoE devices (IP cameras, VoIP, wireless AP, etc.). And it can detect your PoE devices according to PoE standard. So the users do not need to worry about the PoE switch will damage their PoE devices.
The max transmission distance is 100 meters with Cat5 cables. Ideally, shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss. Plug & play design make the installation quite easy,users do not need any configuration, which make this PoE switch a very good choice for IP cameras, wireless AP, VoIP users.
8 + 1 Ports 10/100Mbps Unmanaged PoE Switch.
IT-ES100-PU-81T-POE Series PoE Switch compliance with IEEE802.3at standard, with power supply distance within 100meter, and support 802.3af/at terminal device. Therefore, there is no need to worry about damaging private standard PoE or non-PoE device.
In addition, when the PoE is not connected, it will stop power supply. PoE switch supply power and transfer date by network cables, network cables do not require a qualified electrician to fit them, and can be located anywhere, so reducing the time and expense of having electrical power cabling installed. It is also very compact and flexible in design. IT-ES100-PU-81T-POE Series is the ideal choice for those who desire to economically use PoE to deploy wireless access point and small-size commercial network that is based on IP camera.
8 Ports 10/100Mbps Unmanaged PoE Switch.
IT-ES100-PU-82T-POE Series POE Switch compliance with IEEE802.3at standard, with power supply distance within 100meter, and support 802.3af/at terminal device. Therefore, there is no need to worry about damaging private standard PoE or non-PoE device.
In addition, when the PoE is not connected, it will stop power supply. PoE switch supply power and transfer date by network cables, network cables do not require a qualified electrician to fit them, and can be located anywhere, so reducing the time and expense of having electrical power cabling installed. It is also very compact and flexible in design. IT-ES100-PU-82T-POE Series is the ideal choice for those who desire to economically use PoE to deploy wireless access point and small-size commercial network that is based on IP camera.
24 Ports PoE Switch.
IT-ES1000-PM-24S-POE is 24 port gigabit managed PoE switch, auto detection and identification IEEE802.3af standard PD device, then carry power to it. Therefore do not worry it will destroy the private standard PoE or Non-PoE equipment.
IT-ES1000-PM-24S-POE is the best choice for minitype commercial network because it economically use PoE deployment wireless AP and IP camera. IT-ES1000-PM-24S-POE can resolve the problem of maintenance tedious, wireless coverage, terminal device powered, surveillance project. Maximum save the cost.
16 Ports Gigabit Unmanaged PoE Switch.
This Unmanaged 16 Ports 10/100/1000Mbps PoE Switch with 250W internal power, also with 2 gigabit SFP slots, provides an easier installation way for your PoE devices (IP cameras, VoIP, wireless AP, etc.) and it can detect your PoE devices according to PoE standard. So the users do not need to worry about the PoE switch will damage their PoE devices.
The max transmission distance is 100 meters with Cat5 cables. Ideally, shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss. Plug & play design make the installation quite easy, users do not need any configuration, which make this PoE switch a very good choice for IP cameras, wireless AP, VoIP users.
24 + 2 Gigabit PoE Switch (24 PoE ports).
IT-ES1000-PU-24G-POE with 24 10/100/1000Mbps PoE ports, all ports support wire-speed forwarding, 2 gigabit optical interfaces (SFP port) for high-speed connection. It supplies power for device support IEEE802.3af/at standard, so the user needn’t to worry about the PoE switch would damage the non PoE device. And also when the PoE device is disconnected, the PoE switch will stop providing power.
The product is highly integrated design, lightweight, simple operation, suitable for medium or large office. Based on gigabit network technology, avoid network traffic and have a good network adaptability. Used (802.3az) Green Ethernet technology, by detecting of the length cable and the work load, automatically adjust the signal strength without reducing the operation performance and efficiency of the device, reduce energy consumption and protect the environment.
4 + 1 Gigabit PoE Switch (4 PoE Ports).
4+1 Ports Gigabit PoE Switch, model IT-ES1000-PU-4G-POE, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This unmanaged switch offers four Gigabit PoE ports which supply 15.4 watts of power single port for devices such as high power wireless access points, and VoIP telephony systems.
This rack mountable switch features an eternal power supply. Auto sensing technology delivers 15.4 watts to 802.3af PoE devices. It reduces energy consumption by up to 70% when the switch is not in use. Boost office efficiency and reduce network congestion with a total switching capacity of 10 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case.
8 Ports Gigabit PoE Switch
The 8 Ports gigabit PoE switch with 48V/2A external power, provides an easier installation way for your PoE devices (IP cameras, VoIP, wireless AP, etc.). And it can detect your PoE devices according to PoE standard. So the users do not need to worry about the PoE switch will damage their PoE devices. The max transmission distance is 100 meters with Cat5 cables. Ideally, shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss. Plug & play design make the installation quite easy, users do not need any configuration, which make this PoE switch a very good choice for IP cameras, wireless AP, VoIP users.
12 ports 10/100M Ethernet + 12 ports 100Base-FX (SC/ST/FC) Unmanaged Industrial Ethernet Switch.
The IT-ES1024-IU-12F Industrial Ethernet switches consists of 12 Ethernet ports and 12 Fiber ports that provide an economical solution for your industrial Ethernet connection. The IT-ES1024-IU-12F switches have an operating temperature range of -40 to 75°C, and are designed with low consumption and without fan. The rugged hardware design makes the IT-ES1024-IU-12F perfect for ensuring that your Ethernet equipment can withstand the rigors of industrial applications.