6-ports 10/100M Ethernet + 2-ports 100Base-FX(SC/ST) + 2-ports gigabit (SFP) slot) Managed Industrial Ethernet Switch.
The IT-ES7110-IM-2GS-2F is an industrial grade, managed and redundancy Ethernet switch. It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring, fault alarm and firmware upgrade online. SW-Ring™ can bring your Ethernet to intelligent redundancy.
Standard Industry design, can satisfied every requirement of the industry scene. All components used industry grade, it takes products high reliability. It provided wide voltage power supply input. SWRing™ is designed as a rapid redundancy network arithmetics . It provided recover technology for fault of rapid redundant network, the recovery time<20ms.
ThermalTronix Uncooled HD Thermal Imaging Module resolution 640 x 512 pixel, pitch: 17 µm. Continuous digital zoom, from 1 × -4 × (step of 0.1/1)
IT-1203SZN-IRFL is designed as the high efficacy light sources for application system of license plate recognition. Under the condition of complete darkness, it helps camera system obtaining clearly pictures of number plate, vehicle body and cab.
IT-1203SZN-WLSL is designed as the high efficacy light sources for application system of license plate recognition. Under the condition of complete darkness, it helps camera system obtaining clearly pictures of number plate, vehicle body and cab.
IT-1204SZN-IRFL is designed as the high efficacy Xenon flash lamp for traffic enforcement system. Through camera control, it provides accurate synchronous flash light for snapshot. Under the condition of complete darkness, it helps camera system obtaining clearly pictures of number plate, vehicle body and cab. It’s an ideal flash lamp for traffic enforcement system.
IT-1204SZN-WLSL is designed as the high efficacy Xenon flash lamp for traffic enforcement system. Through camera control, it provides accurate synchronous flashlight for snapshot. Under the condition of complete darkness, it helps camera system obtaining clearly pictures of number plate, vehicle body and cab. It’s an ideal flash lamp for traffic enforcement system.
IT-232-CAN is used for data exchange between CAN-Bus field bus and RS-232 bus interface converter, and supports Modbus RTU protocol. IT-232-CAN interface converter integrated a RS-232 channel and a CAN-Bus channel can be easily embedded using RS-232 interface for communication nodes, do not need to change the original hardware architecture enables the device to obtain the CAN-Bus communication interface, to achieve between the equipments of RS-232 and CAN-Bus network connection and data communication. RS-232 channel IT-232-CAN devices to support a variety of baud rate, the range is 300bps~115200bps. CAN-Bus channel support CiA recommended a variety of standard baud rate and user-defined baud rate, the range of 2.5Kbps~1Mbps. IT-232-CAN interface converter provides three types of data conversion: transparent conversion, encryption conversion and Modbus protocol conversion. Its exterior design supports DIN-Rail mounting and Wall mounting, which is convenient for engineering application. The board comes with a photoelectric isolation module, complete electrical isolation control circuit and CAN-Bus communication circuit, so that the IT-232-CAN converter has a strong anti-interference ability, greatly improving the system in the harsh environment of the use of reliability.
Model IT-232I-25 is a kind of RS232 system communication serial port optic isolation product. This product support transmission rate as high as 921600bps, no external power needed, optic electric isolation 2.5KV, is applicable in tough environment. According to different customer need, separately corresponds to three-line serial port application with RTS/CTS (or DTR/CTS). Transmission distance at 9,600bps is 10m, stable performance.
Model IT-232I-25 is a kind of RS232 system communication serial port optic isolation product. This product support transmission rate as high as 921600bps, no external power needed, optic electric isolation 2.5KV, is applicable in tough environment. According to different customer need, separately corresponds to three-line serial port application with RTS/CTS (or DTR/CTS). Transmission distance at 9,600bps is 10m, stable performance.
The Intellisystem IT-232P33-TTL is a bi-directional port powered RS-232 to 3.3V TTL converter in a 9 pin format. It can convert any standard full duplex RS-232C port to a 3.3V TTL signal and vice versa. The unit is powered from the RS-232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the TTL driver when data is present on the RS-232 side making the device plug-and-play, requiring no software drivers. The IT-232P33-TTL has a DB9 female connector on the RS-232 side and either a DB9 male connector or 5-way terminal block on the TTL side. Separate terminal block is included in package.
The Intellisystem IT-232P5-TTL is a bi-directional port powered RS-232 to 5V TTL converter in a 9 pin format. It can convert any standard full duplex RS-232C port to a 5V TTL signal and vice versa. The unit is powered from the RS-232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the TTL driver when data is present on the RS-232 side making the device plug-and-play, requiring no software drivers. The IT-232P5-TTL has a DB9 female connector on the RS-232 side and either a DB9 male connector or 5-way terminal block on the TTL side. Separate terminal block is included in package.
IT-3000-OCT is a type of RS-485/422 bus division concentrator of high performance. IT-3000-OCT adopts the unique equipotential differential isolation and bus division concentration technology to effectively such problems as ground potential difference, impedance matching and lightning strike frequently seen in engineering wiring process. Users can easily optimize the RS-485/RS-422 bus structure, divide the network section and improve the communication reliability. The fault network section shall be isolated in case of lightning strike or equipment faults to ensure the high communication reliability of other network sections. Such performance of IT-3000-OCT can significantly improve the reliability of existing RS-485/RS-422 network, and effectively shorten the network maintenance time. Reasonable utilization of IT-3000-OCT can enable you to design unique RS-485/RS-422 system.
IT-3101SZN-IRSL Digital LED Strobe Light is a high power and smart performance digital pulse strobe light for ANPR (Auto Number Plate Recognition) system. It’s widely apply into traffic crossing, urban road and high way for capture number plate and speed measurement. Complied with our latest professional strobe control circuit, it is featured as rapidly relighting, long service life, accurate control of flash time and brightness, evenly high instantaneous power output. Through precision adjustment control software to synchronize camera and obtain clearly pictures under any kinds of environment with less influence of human eye.
IT-3101SZN-WLSL Digital LED Strobe Light is a high power and smart performance digital pulse strobe light for ANPR (Auto Number Plate Recognition) system. It’s widely apply into traffic crossing, urban road and high way for capture number plate and speed measurement. Complied with our latest professional strobe control circuit, it is featured as rapidly relighting, long service life, accurate control of flash time and brightness, evenly high instantaneous power output. Through precision adjustment control software to synchronize camera and obtain clearly pictures under any kinds of environment with less influence of human eye.
IT-3102SZN-IRSL Digital LED Strobe Light is a high power and smart performance digital pulse strobe lamp applying for Intelligent Traffic System applications. It’s suitable for traffic crossing; urban road and high way for number plate recognition and speed measurement. Complied with latest professional strobe control circuit, it can accurately control strobe flash time, brightness and output of high instantaneous power. It has rapid recycling time and long lifespan, through synchronization with the strobe lamp, ITS cameras can obtain clear pictures of number plate, vehicle body and cab under any kind of environment without influence of human eye.
IT-3102SZN-WLSL Digital LED Strobe Light is a high power and smart performance digital pulse strobe lamp applying for Intelligent Traffic System applications. It’s suitable for traffic crossing; urban road and high way for number plate recognition and speed measurement. Complied with latest professional strobe control circuit, it can accurately control strobe flash time, brightness and output of high instantaneous power. It has rapid recycling time and long lifespan, through synchronization with the strobe lamp, ITS cameras can obtain clear pictures of number plate, vehicle body and cab under any kind of environment with less influence of human eye.