(English) IT-3102SZN-WLSL

(English)

IT-3102SZN-WLSL Digital LED Strobe Light is a high power and smart performance digital pulse strobe lamp applying for Intelligent Traffic System applications. It’s suitable for traffic crossing; urban road and high way for number plate recognition and speed measurement. Complied with latest professional strobe control circuit, it can accurately control strobe flash time, brightness and output of high instantaneous power. It has rapid recycling time and long lifespan, through synchronization with the strobe lamp, ITS cameras can obtain clear pictures of number plate, vehicle body and cab under any kind of environment with less influence of human eye.

Categorie: Illuminatori A Luce Bianca, Illuminatori Strobo a LED, Prodotti Tag: -40～+85℃, 108W, 1ms～5ms, 2.5KG, 20 pieces, 261*202*90mm, AC165~220V, IP66, RS485 port

Descrizione

Ci spiace, ma questo articolo è disponibile soltanto in English.

Produce Features

Accurately control flash time.
Accurately control Instant / delay trigger time.
Instant light output in high brightness.
Support continuous high brightness flash output.
Instant relighting, assure sequence flashing rapidly.
Less influence of human eye.
Set up and adjustment through RS485 port on PC, data will not be lose if power down.
Suit for multiple ambient light efficacy request through different setting.
Low heating, long life span, the brightness is several times more than common led strobe light.

(English)

TECHNICAL SPECIFICATIONS

Model: IT-3102SZN-WLSL

Main Processor: High performance MCU

User Interface: RS485 port

LED: 20 pcs high brightness white light LED

Beam Angle: 15° (standard), 30°, 45° (optional)

D/N switch: environmental brightness detection

Flash Port: flash trigger input signal

Strobe Port: frequency strobe, depended on multiple frequency pulse signal from camera, duty ratio can be adjusted

Mode H: Sync. by multiple frequency pulse signal from camera. (duty cycle cannot over 50%)

RS485 Port: connect to PC or camera

Parameter Setting: support internal setting such as strobe brightness etc.

Power Supply: AC165~220V

Power Consumption: Average≤35W, Peak: 108W

Strobe Brightness Level: 1～5

Trigger Method: electrical level、switching value、RS485 order

Protection level: IP66

Working temperature: -40～+50℃

Storage temperature: -40～+85℃

N.W: 2.5kg

Size: 261*202*90mm

(English)

VIEWING PICTURE AT NIGHT

LPR/ANPR PICTURE

Datasheet Prodotto

DOWNLOAD