IT-DIN-15S | Intellisystem Technologies

(English) IT-DIN-15S Series

(English) 15 Watts Single Output Industrial DIN Rail Power Supply Series

Two stages of constant current circuit avoid LED away from instantly impulse impact when started.
Low failure rate of products is guaranteed by the professional in-house optimized independent circuit technology, which has been widely used in our LED illuminators for more than 5 years.
Wide edge of silica gel circle and water stop line ensure IP66 waterproof and dustproof level.
Twice direct cooling heat sink processing enable to increase the cooling coefficient and prolong the service life of the product.
Patent design hexagonal spherical light sensor more accurately responses ambient brightness and improves accuracy of automatic light control.
Flexible angle adjustable bracket can extend the illuminance range widely.
IP66 waterproof and dustproof housing available work at ambient temperature -40°C to 50°C.
Professional Design

Categories: Alimentatori Industriali, Barra DIN, Prodotti Tags: 0.65A, 1.25A, 10~70℃, 103.7*32*97.5mm, 12~14V, 12V, 15 Watts, 24~28V, 24V, 47Hz~63Hz, Guida DIN, Single Output

Description

Ci spiace, ma questo articolo è disponibile soltanto in English.

15 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

(English)

TECHNICAL SPECIFICATIONS

MODEL			IT-DIN-15S-12	IT-DIN-15S-24
OUTPUT	DC Output		12V	24V
	Rated Current		1.25A	0.65A
	Current Range Note 1		0~1.25A	0~0.65A
	Ripple and Noise	10~70℃	≤120mV	≤120mV
	Note 2	.-25~10℃	≤240mV	≤240mV
	Voltage ADJ. Range		12~14V	24~28V
	Voltage Accuracy		±1.0%
	Line Regulation		±0.5%
	Load Regulation		±1%
	Set-up Time		<1.5S @230Vac Full load
	Hold up Time		≥20mS @230Vac Full load
	Temperature Coefficient		±0.03%/℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		90Vac~264Vac, 127VDC-370VDC
	Frequency Range		47Hz~63Hz
	Efficiency ( Typical)		83% @230Vac input, full load	84.5% @230Vac input, full load
	AC Current (max.)		<0.5A
	Inrush Current (Typical)		50A/230Vac Cold start
	Leakage Current		Input—output: ≤0.25mA Input—PE: ≤3.5mA (264Vac input, 63Hz)
PROTECTION	Over Load		1.5~2.0A, hiccup mode, auto recovery	0.7~1.0A, hiccup mode, auto recovery
	Over voltage		15.0~16.8V, Constant voltage, auto recovery	28.8~31.2V, Constant voltage, auto recovery
	Short Circuit		Long-term mode, auto recovery
ENVIRONMENT	Operating amb. Temp. & Hum.		.-25℃~70℃; 20%~90%RH No condensing
	Storage Temp. & Hum.		.-40℃~85℃; 5%~95%RH No condensing
SAFETY &EMC	Safety Standards		UL60950, EN60950
Note 3	Withstand Voltage		Primary-Secondary: 3KVac/10mA; Primary-PE: 1.5KVac/10mA; Secondary-PE: 0.5KVac/10mA
	Isolation Resistance		>10M ohms
	EMC Emission		Compliance to EN55022, EN55024 Class B
	Harmonic Current		Compliance to EN61000-3-2 ， CLASS A
	EMC Immunity		Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level
OTHERS	MTBF (MIL-HDBK-217F)		590,000Hrs (25℃, Full load)
	Dimension (LWH)		103.73297.5mm
	Packing		36pcs/CTN
	Cooling method		Cooling by free air convection

NOTE	1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
	2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.