DESCRIZIONE PRODOTTO
Features
- Three stages of protection on every data line
- Protected signal ground connection
- Easy to install, plug-and-play
- 4500V surge protection
(English)
IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, IT-FL485-SP have high respond speed, low output rudimental voltage, ascendance transfer performance. All have #10 ground screws which must be connected to a solid ground.
Ci spiace, ma questo articolo è disponibile soltanto in Inglese Americano. Per ragioni di convenienza del visitatore, il contenuto è mostrato sotto nella lingua alternativa. Puoi cliccare sul link per cambiare la lingua attiva.
(English)
Technology
Standard: Accord EIA RS-485 standard
RS485 signal: IEC6100-4-5 and ITU-TK20&21
Working voltage: 0-5V
Limit voltage: <15V
Apply Band rate: 1Mbps
Isolate signal: TXD, RXD, and GND
Connector: Standard industrial terminal block
Insert consumption: <0.5dB
Delay time: <1ns
Environment
Working temperature:-20 to 60
Storage temperature:-25 to 85
Humidity: Relative humidity 5% to 95%
Power
Input powered: No power supply needed
Consumption: No consumption
Dimension
L×W×H: 74mm×25mm×25mm
Shell: Alnico
Color: Blue
Weight: 10g
Warranty: 5 years
Approvals: FCC,CE, RoHS approvals
Packing ListThermal Inspection DRONE – UAV – AS Infrared Imaging System. This series of UAV is foldable, easy to carry and to be put into backpack with a foldable frame and convenient to close or open etc. it features with greater load capacity, longer air staying time, perfect power configuration.
4-ports 10/100Base-T(x) (POE) + 2-ports 100Base-FX + 2-ports 10/100Base-T(x).
IT-IPS-618-IM-2F-4-POE  is an industrial grade, managed and redundancy Ethernet switch. The switch provides 4 ports 10/100M Ethernet PoE, 4 ports 10/100M Ethernet and 2 ports fast Ethernet optical, which 4 ports Ethernet supports POE function (IEEE 802.3af/at). It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring and fault alarm. SW-Ring™ can bring your Ethernet to intelligent redundancy. The -40~75℃ working temperature, can meet all kinds of Industrial environment requirement and provide the solution of the economy.
4-ports 10/100M Base-T(x) PoE + 1-port 10/100M Base-T(x).
The IT-IPS-215-IU-4-POE switch is a kind of unmanaged industrial PoE switch, it support 5 10/100Base-T(X) ports. The 4 Fast Ethernet port (1~4) support Power-over -Ethernet (PoE) function. The switches are classified as power source equipment (PSE), and when used in this way, the IT-IPS-215-IU-4-POE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, IT-IPS-215-IU-4-POE adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing reliable and economic solution for your industrial Ethernet network
Â
4-ports 10/100Base-T(x) (POE) + 4-ports 10/100Base-T(x).
IT-IPS-618-IM-4-POE is an industrial grade, managed and redundancy Ethernet switch. The switch provides 8 ports 10/100M Ethernet and 4 ports 10/100M Ethernet PoE, which 4 ports Ethernet supports POE function (IEEE 802.3af/at). It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring and fault alarm. SW-Ring™ can bring your Ethernet to intelligent redundancy. The -40~75℃ working temperature, can meet all kinds of Industrial environment requirement and provide the solution of the economy.