(English) IT-EMC-75S Series
(English)
75 Watts Single Output Series
- No Load power consumption<0.5W
- Withstand 300VA surge input for 5 sec.
- High Efficiency, High reliability and long life
- Output protections: OLP/OVP/SCP
- Wide operating ambient temperature (-25℃~70℃)
- Operating altitude up to 5000m
- All using 105℃ long life electrolytic capacitors.
- PCB soldering side with conformal coating
- 100% full load burn-in test
- 3 years warranty
Condividi su:
- Fai clic qui per condividere su LinkedIn (Si apre in una nuova finestra)
- Fai clic per condividere su Facebook (Si apre in una nuova finestra)
- Fai clic qui per condividere su Pinterest (Si apre in una nuova finestra)
- Fai clic qui per condividere su Twitter (Si apre in una nuova finestra)
- Fai clic per condividere su WhatsApp (Si apre in una nuova finestra)
- Fai clic qui per condividere su Reddit (Si apre in una nuova finestra)
- Fai clic qui per condividere su Tumblr (Si apre in una nuova finestra)
- Fai clic per condividere su Telegram (Si apre in una nuova finestra)
- Fai clic qui per condividere su Pocket (Si apre in una nuova finestra)
- Fai clic per inviare un link a un amico via e-mail (Si apre in una nuova finestra)
- Fai clic qui per stampare (Si apre in una nuova finestra)
- Descrizione
- Specifiche Tecniche
- Diagrammi a Blocchi
- Grafici e Curve
- Disegni Meccanici
- Documenti / Download
- Contattaci / Richieste
Descrizione
Ci spiace, ma questo articolo è disponibile soltanto in English.
75 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
(English)
TECHNICAL SPECIFICATIONS
MODEL | IT-EMC-75S-5 | IT-EMC-75S-12 | IT-EMC-75S-15 | ||
---|---|---|---|---|---|
OUTPUT | DC Output | 5V | 12V | 15V | |
Rated Current | 12A | 6A | 5A | ||
Current Range Note 1 | 0~12A | 0~6A | 0~5A | ||
Ripple and Noise Note 2 | 0~70℃ | <50mV | <80mV | <80mV | |
.-25~0℃ | <80mV | <200mV | <200mV | ||
Voltage ADJ. Range | 4.75~5.5V | 11.4~13.2V | 14.25~16.5V | ||
Voltage Accuracy | ±1.0% | ||||
Line Regulation | ±0.5% | ||||
Load Regulation | ±1.0% | ||||
Set-up Time | ≤1S(230Vac input, Full load) | ||||
Hold up Time | ≥20mS(230Vac input, Full load) | ||||
Temperature Coefficient | ±0.03%/ ℃ | ||||
Overshoot and Undershoot | <5.0% | ||||
INPUT | Voltage Range | 90Vac~264Vac | |||
Frequency Range | 47Hz~63Hz | ||||
Efficiency ( Typical) | 0.79 | 0.84 | 0.86 | ||
AC Current (max.) | <2.5A | ||||
Inrush Current (Typical) | <60A@230Vac Cold start | ||||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz) | ||||
PROTECTION | Over Load | 12.6~18A | 6.3~9A | 5.25~7.5A | |
Protection type: 5V, hiccup mode; others, constant power, Auto recovery | |||||
Over Voltage | 5.5~7.5V | 13.2~18V | 16.5~22.5V | ||
Protection type: constant voltage, auto recovery | |||||
Short Circuit | Long-term mode, auto recovery | ||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing((refer to the derating curve) | |||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | ||||
SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1 : 2006 | |||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/ 10mA .Primary-PG:1.5KVac/ 10mA. Secondary-PG: 0.5KVDC/ 10mA. | |||
Isolation Resistance | 100M ohms | ||||
EMI Conduction& Radiation | Compliance to EN55022 Class B / FCC Part15 B | ||||
Harmonic Current | Compliance to EN61000-3-2, Class A | ||||
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | ||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | |||
Dimension (L*W*H) | 129×98×38mm | ||||
Packing | 30PCS/CTN, 14.2KGS, 0.044CBM | ||||
Cooling method | Cooling by free air convection |
MODEL | IT-EMC-75S-24 | IT-EMC-75S-48 | ||
---|---|---|---|---|
OUTPUT | DC Output | 24V | 48V | |
Rated Current | 3.2.A | 1.6A | ||
Current Range Note 1 | 0~3.2A | 0~1.6A | ||
Ripple and Noise Note 2 | 0~70℃ | <80mV | <120mV | |
.-25~0℃ | <200mV | <240mV | ||
Voltage ADJ. Range | 22.8~26.4V | 45.6~52.8V | ||
Voltage Accuracy | ±1.0% | |||
Line Regulation | ±0.5% | |||
Load Regulation | ±1.0% | |||
Set-up Time | ≤1S(230Vac input, Full load) | |||
Hold up Time | ≥20mS(230Vac input, Full load) | |||
Temperature Coefficient | ±0.03%/ ℃ | |||
Overshoot and Undershoot | <5.0% | |||
INPUT | Voltage Range | 90Vac~264Vac | ||
Frequency Range | 47Hz~63Hz | |||
Efficiency ( Typical) | 86.5% | 0.88 | ||
AC Current (max.) | <2.5A | |||
Inrush Current (Typical) | <60A@230Vac Cold start | |||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz) | |||
PROTECTION | Over Load | 3.36~4.8A | 1.7~2.43A | |
Protection type: 5V, hiccup mode; others, constant power, Auto recovery | ||||
Over Voltage | 26.4~36V | 52.8~72V | ||
Protection type: constant voltage, auto recovery | ||||
Short Circuit | Long-term mode, auto recovery | |||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing((refer to the derating curve) | ||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||
SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1 : 2006 | ||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/ 10mA .Primary-PG:1.5KVac/ 10mA. Secondary-PG: 0.5KVDC/ 10mA. | ||
Isolation Resistance | 100M ohms | |||
EMI Conduction& Radiation | Compliance to EN55022 Class B / FCC Part15 B | |||
Harmonic Current | Compliance to EN61000-3-2, Class A | |||
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | |||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||
Dimension (L*W*H) | 129×98×38mm | |||
Packing | 30PCS/CTN, 14.2KGS, 0.044CBM | |||
Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor.
Datasheet Prodotto
Prodotti correlati
-
(English) IT-IPS-205G-IU-GS-4-POE
(English)- Leggi tutto4-ports 10/100/1000M Base-T (x) PoE + 1-port Gigabit SFP slot.
The IT-IPS-205G-IU-GS-4-POE switch is a kind of unmanaged industrial Gigabit PoE switch, it support 4 10/100/1000Base-T(X) ports and 1 Gigabit SFP port. The 4 Gigabit Ethernet port G1~G4 support Power-over-Ethernet (PoE) function. The IT-IPS-205G-IU-GS-4-POE switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switches support IEEE802.3/ IEEE802.3u/ IEEE802.3x with 10/100/1000M, full/half-duplex, and MDI/MDI-X auto-sensing, providing reliable and economic solution for your industrial Ethernet network.
-
(English) IT-ES1000-PU-16G-POE
(English)- Leggi tutto16 Ports Gigabit Unmanaged PoE Switch.
This Unmanaged 16 Ports 10/100/1000Mbps PoE Switch with 250W internal power, also with 2 gigabit SFP slots, provides an easier installation way for your PoE devices (IP cameras, VoIP, wireless AP, etc.) and it can detect your PoE devices according to PoE standard. So the users do not need to worry about the PoE switch will damage their PoE devices.
The max transmission distance is 100 meters with Cat5 cables. Ideally, shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss. Plug & play design make the installation quite easy, users do not need any configuration, which make this PoE switch a very good choice for IP cameras, wireless AP, VoIP users.
-
(English) IT-DIN-480 Series
(English)- Leggi tutto480 Watts Single Output Industrial DIN Rail Power Supply Series
- Universal AC input range(85~264Vac)
- Support 1+1 or N+1 redundant system(suggest to use redundancy modules.)
- Built-in active PFC,PF>0.95
- High efficiency up to 91%
- Built-in current sharing function
- Built-in current limiting circuit
- Output protections: OVP/OLP/SCP/OTP
- Wide operating ambient temp (-25℃~70℃)
- 150% peak load capacity
- Easy Fuse Tripping due to High Overload Current
- Excellent Partial Load Efficiency
- Built-in DC OK relay contact
- Can be installed on TS-35/7.5 or TS-35/15
- 100% full load burn-in test
- Suitable for critical applications
- Ultra-slim,32mm width
- 3 years warranty
-
(English) IT-IPS-315-IM-1GC-4-POE
(English)- Leggi tutto4-ports 10/100Base-T(x) (POE) + 1-port Gigabit Combo.
IT-IPS-315-IM-1GC-4-POE is an industrial grade, unmanaged PoE switch. The switch provides 4 ports 10/100M Ethernet and 1 ports combo Gigabit SFP slots or 10/100/1000Base-T(X) ports, which 4 ports Ethernet supports POE function (IEEE8023af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x/ with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, the -40~75℃ working temperature, can meet all kinds of Industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.
You must belogged in to post a comment.