Italiano
IT-EMC-75S Series
75 Watts Single Output Series
- No Load power consumption<0.5W
- Withstand 300VA surge input for 5 sec.
- High Efficiency, High reliability and long life
- Output protections: OLP/OVP/SCP
- Wide operating ambient temperature (-25℃~70℃)
- Operating altitude up to 5000m
- All using 105℃ long life electrolytic capacitors.
- PCB soldering side with conformal coating
- 100% full load burn-in test
- 3 years warranty
- Description
- Technical Specifications
- Block Diagrams
- Graphs & Curves
- Mechanical Drawings
- Download / Documentation
- Contact US / Requests
Description
75 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
| MODEL | IT-EMC-75S-5 | IT-EMC-75S-12 | IT-EMC-75S-15 | ||
|---|---|---|---|---|---|
| OUTPUT | DC Output | 5V | 12V | 15V | |
| Rated Current | 12A | 6A | 5A | ||
| Current Range Note 1 | 0~12A | 0~6A | 0~5A | ||
| Ripple and Noise Note 2 | 0~70℃ | <50mV | <80mV | <80mV | |
| .-25~0℃ | <80mV | <200mV | <200mV | ||
| Voltage ADJ. Range | 4.75~5.5V | 11.4~13.2V | 14.25~16.5V | ||
| Voltage Accuracy | ±1.0% | ||||
| Line Regulation | ±0.5% | ||||
| Load Regulation | ±1.0% | ||||
| Set-up Time | ≤1S(230Vac input, Full load) | ||||
| Hold up Time | ≥20mS(230Vac input, Full load) | ||||
| Temperature Coefficient | ±0.03%/ ℃ | ||||
| Overshoot and Undershoot | <5.0% | ||||
| INPUT | Voltage Range | 90Vac~264Vac | |||
| Frequency Range | 47Hz~63Hz | ||||
| Efficiency ( Typical) | 0.79 | 0.84 | 0.86 | ||
| AC Current (max.) | <2.5A | ||||
| Inrush Current (Typical) | <60A@230Vac Cold start | ||||
| Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz) | ||||
| PROTECTION | Over Load | 12.6~18A | 6.3~9A | 5.25~7.5A | |
| Protection type: 5V, hiccup mode; others, constant power, Auto recovery | |||||
| Over Voltage | 5.5~7.5V | 13.2~18V | 16.5~22.5V | ||
| Protection type: constant voltage, auto recovery | |||||
| Short Circuit | Long-term mode, auto recovery | ||||
| ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing((refer to the derating curve) | |||
| Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | ||||
| SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1 ： 2006 | |||
| Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/ 10mA .Primary-PG:1.5KVac/ 10mA. Secondary-PG: 0.5KVDC/ 10mA. | |||
| Isolation Resistance | 100M ohms | ||||
| EMI Conduction& Radiation | Compliance to EN55022 Class B / FCC Part15 B | ||||
| Harmonic Current | Compliance to EN61000-3-2, Class A | ||||
| EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | ||||
| OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | |||
| Dimension (L*W*H) | 129×98×38mm | ||||
| Packing | 30PCS/CTN, 14.2KGS, 0.044CBM | ||||
| Cooling method | Cooling by free air convection |
| MODEL | IT-EMC-75S-24 | IT-EMC-75S-48 | ||
|---|---|---|---|---|
| OUTPUT | DC Output | 24V | 48V | |
| Rated Current | 3.2.A | 1.6A | ||
| Current Range Note 1 | 0~3.2A | 0~1.6A | ||
| Ripple and Noise Note 2 | 0~70℃ | <80mV | <120mV | |
| .-25~0℃ | <200mV | <240mV | ||
| Voltage ADJ. Range | 22.8~26.4V | 45.6~52.8V | ||
| Voltage Accuracy | ±1.0% | |||
| Line Regulation | ±0.5% | |||
| Load Regulation | ±1.0% | |||
| Set-up Time | ≤1S(230Vac input, Full load) | |||
| Hold up Time | ≥20mS(230Vac input, Full load) | |||
| Temperature Coefficient | ±0.03%/ ℃ | |||
| Overshoot and Undershoot | <5.0% | |||
| INPUT | Voltage Range | 90Vac~264Vac | ||
| Frequency Range | 47Hz~63Hz | |||
| Efficiency ( Typical) | 86.5% | 0.88 | ||
| AC Current (max.) | <2.5A | |||
| Inrush Current (Typical) | <60A@230Vac Cold start | |||
| Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz) | |||
| PROTECTION | Over Load | 3.36~4.8A | 1.7~2.43A | |
| Protection type: 5V, hiccup mode; others, constant power, Auto recovery | ||||
| Over Voltage | 26.4~36V | 52.8~72V | ||
| Protection type: constant voltage, auto recovery | ||||
| Short Circuit | Long-term mode, auto recovery | |||
| ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing((refer to the derating curve) | ||
| Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||
| SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1 ： 2006 | ||
| Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/ 10mA .Primary-PG:1.5KVac/ 10mA. Secondary-PG: 0.5KVDC/ 10mA. | ||
| Isolation Resistance | 100M ohms | |||
| EMI Conduction& Radiation | Compliance to EN55022 Class B / FCC Part15 B | |||
| Harmonic Current | Compliance to EN61000-3-2, Class A | |||
| EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | |||
| OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||
| Dimension (L*W*H) | 129×98×38mm | |||
| Packing | 30PCS/CTN, 14.2KGS, 0.044CBM | |||
| Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor.
Warning: Undefined variable $user_ID in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/comments.php on line 83
You must belogged in to post a comment.