English
(English) IT-EMC-200PFC Series
(English)
200 Watts Single Output Series
- Universal AC input (90~264Vac)
- Built-in active PFC,PF>0.95
- Withstand 300Vac surge input for 5 sec
- High efficiency, long life and high reliability
- Output protection: SCP/OLP/OPP
- Wide operating ambient temperature (-20~65℃)
- Operating altitude up to 5000m
- PCB both sides with conformal coating
- All using 105 ℃ long life electrolytic capacitor
- 100% full load burn-in test
- Built-in cooling fan speed control
- 3 years warranty
- Description
- Specifiche Tecniche
- Diagrammi a Blocchi
- Grafici e Curve
- Disegni Meccanici
- Documenti / Download
- Contattaci / Richieste
Description
200 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
(English)
TECHNICAL SPECIFICATIONS
| MODEL | IT-EMC-200PFC-12II | IT-EMC-200PFC- 24II | IT-EMC-200PFC-36II | IT-EMC-200PFC-48II | ||
|---|---|---|---|---|---|---|
| OUTPUT | DC Output | 12V | 24V | 36V | 48V | |
| Rated Current | 16.7A | 8.4A | 5.6A | 4.2A | ||
| Current Range Note 1 | 0~16.7A | 0~8.4A | 0~5.6A | 0~4.2A | ||
| Ripple and Noise Note 2 | 0~65C | ≤150mV | ≤150mV | ≤200mV | ≤150mV | |
| -20~0C | ≤200mV | ≤200mV | ≤200mV | ≤200mV | ||
| Voltage ADJ. Range | 9~15V | 20~27V | 32~40V | 40~53V | ||
| Voltage Accuracy | ±2.0% | ±1.0% | ||||
| Line Regulation | ±0.5% | |||||
| Load Regulation | ±2.0% | ±1.0% | ||||
| Set-up Time | ≤2S (230Vac input, Full load) ≤4S (120Vac input, Full load) | |||||
| Hold up Time | ≥12mS (230Vac input, Full load) | |||||
| Temperature Coefficient | ±0.03%/℃ | |||||
| Overshoot and Undershoot | <5.0% | |||||
| INPUT | Voltage Range | 90Vac~264Vac,120Vdc~370Vdc | ||||
| Frequency Range | 47Hz--63Hz | |||||
| Power Factor(Typical) | PF ＞ 0.98/115VAC PF ＞ 0.95/230VAC | |||||
| Efficiency ( Typical) @ 230Vac | ≥84% | ≥87% | ≥86.5% | ≥87% | ||
| AC Current (max.) | < 3.5A | |||||
| Inrush Current (Typical) | <50A@220Vac <30A@110Vac Cold start | |||||
| Leakage Current | Input—Output:<0.25mA Input—PG:<3.5mA | |||||
| PROTECTION | Over Load | 18~30A | 10~15A | 5.88~8.8A | 5~7.56A | |
| Protection type: Hiccup mode, auto recovery | ||||||
| Over power | 216~360W | 240~360W | 210~320W | 240~363W | ||
| Protection type: Hiccup mode, auto recovery | ||||||
| Short Circuit | Long-term mode, auto recovery | |||||
| ENVIRONMENT | Operating amb. Temp. & Hum. | .-20℃~65℃; 20%~90%RH No condensing(refer to the derating curve) | ||||
| Vibration | 10 ~ 150Hz, 2G 10min./1cycle, period for60min. each along X,Y, Z axes | |||||
| Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||||
| SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||||
| (Note 3) | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤10mA. | ||||
| Isolation Resistance | 10M ohms | |||||
| EMI Conduction&Radiation | Compliance to EN55022 EN55024 FCC PART 15 Class B | |||||
| EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | |||||
| OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||||
| Dimension (L*W*H) | 199×99×50mm | |||||
| Packing | 12PCS/CTN, 11.4KGS, 0.04CBM | |||||
| Cooling method | Cooling by forced air (built-in DC fan) | |||||
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
Warning: Undefined variable $user_ID in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/comments.php on line 83
You must belogged in to post a comment.