IT-EMC-200PFC Series

IT-EMC-200PFC Series

200 Watts Single Output Series

  • Universal AC input (90~264Vac)
  • Built-in active PFC,PF>0.95
  • Withstand 300Vac surge input for 5 sec
  • High efficiency, long life and high reliability
  • Output protection: SCP/OLP/OPP
  • Wide operating ambient temperature (-20~65℃)
  • Operating altitude up to 5000m
  • PCB both sides with conformal coating
  • All using 105 ℃ long life electrolytic capacitor
  • 100% full load burn-in test
  • Built-in cooling fan speed control
  • 3 years warranty

Description

200 Watts Single Output Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

TECHNICAL SPECIFICATIONS

MODEL IT-EMC-200PFC-12II IT-EMC-200PFC- 24II IT-EMC-200PFC-36II IT-EMC-200PFC-48II
OUTPUTDC Output12V24V36V48V
Rated Current16.7A8.4A5.6A4.2A
Current Range Note 10~16.7A0~8.4A0~5.6A0~4.2A
Ripple and Noise Note 20~65C≤150mV≤150mV≤200mV≤150mV
-20~0C≤200mV≤200mV≤200mV≤200mV
Voltage ADJ. Range9~15V20~27V32~40V40~53V
Voltage Accuracy ±2.0%±1.0%
Line Regulation±0.5%
Load Regulation±2.0%±1.0%
Set-up Time≤2S (230Vac input, Full load) ≤4S (120Vac input, Full load)
Hold up Time ≥12mS (230Vac input, Full load)
Temperature Coefficient±0.03%/℃
Overshoot and Undershoot<5.0%
INPUTVoltage Range 90Vac~264Vac,120Vdc~370Vdc
Frequency Range47Hz--63Hz
Power Factor(Typical)PF > 0.98/115VAC PF > 0.95/230VAC
Efficiency ( Typical) @ 230Vac≥84%≥87%≥86.5%≥87%
AC Current (max.)< 3.5A
Inrush Current (Typical)<50A@220Vac <30A@110Vac Cold start
Leakage CurrentInput—Output:<0.25mA Input—PG:<3.5mA
PROTECTIONOver Load18~30A10~15A5.88~8.8A5~7.56A
Protection type: Hiccup mode, auto recovery
Over power216~360W240~360W210~320W240~363W
Protection type: Hiccup mode, auto recovery
Short CircuitLong-term mode, auto recovery
ENVIRONMENTOperating amb. Temp. & Hum..-20℃~65℃; 20%~90%RH No condensing(refer to the derating curve)
Vibration10 ~ 150Hz, 2G 10min./1cycle, period for60min. each along X,Y, Z axes
Storage Temp. & Hum..-40℃~85℃; 10%~95%RH No condensing
SAFETY &EMCSafety StandardsUL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006
(Note 3)Withstand VoltagePrimary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤10mA.
Isolation Resistance10M ohms
EMI Conduction&RadiationCompliance to EN55022 EN55024 FCC PART 15 Class B
EMS ImmunityCompliance to EN61000-4-2,3,4,5,6,8,11;
OTHERSMTBF (MIL-HDBK-217F)More than 200,000Hrs (25℃, Full load)
Dimension (L*W*H)199×99×50mm
Packing12PCS/CTN, 11.4KGS, 0.04CBM
Cooling methodCooling by forced air (built-in DC fan)

 

NOTES:

1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.

2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.

IT-EMC-200PFC Series
IT-EMC-200PFC Series
IT-EMC-200PFC Series
IT-EMC-200PFC Series
IT-EMC-200PFC Series

Product Datasheet

About the author:

Cristian is a brilliant intelligent and great proactivity person and an effective communicator and visionary. He has built a strong (and deserved) reputation as someone with vision, diligence and honor. Cristian is not a simple engineer but he is a real Scientist. His knowledge is not restricted to the area it covers, but its impressive passion for all the technical topics led him to acquire great skills even in areas far from his original studies. Cristian is able to address and solve complex technical problems with excellent results. He is a valuable writer with great scientific background formed with more that 15 years of active research on experimental Nuclear Physics performed in the most famous international research laboratories such as CERN, ESRN, INF. He write about HI-Tech solutions topics and advanced research study applied to industry. He have more than 150 scientific & technical publications. He is also a technical and famous writer in Italy due to his interviews released on the most famous Industrial Italian magazine.

You must belogged in to post a comment.

Intellisystem Technologies