(English) IT-DIN-960 Series

(English)

960 Watts Single Output Industrial DIN Rail Power Supply Series

Universal AC input range(85~264Vac)
Support 1+1 or N+1 redundant system（suggest to use redundancy modules.）
Built-in active PFC,PF≥0.98
High efficiency up to 94.5%
Built-in current sharing function
Built-in current limiting circuit
Output protections: OVP/OLP/SCP/OTP
Wide operating ambient temp (-25℃~70℃)
Altitude up to 6000m
150% peak load capacity
Easy Fuse Tripping due to High Overload Current
Built-in DC OK relay contact
Remote control output voltage
Internal fault diagnose through LED light
Can be installed on TS-35/7.5 or TS-35/15
100% full load burn-in test
PCB soldering side with conformal coating
Suitable for critical applications
Ultra-slim,140mm width
Free air convection
3 years warranty

DESCRIZIONE PRODOTTO

Ci spiace, ma questo articolo è disponibile soltanto in Inglese Americano. Per ragioni di convenienza del visitatore, il contenuto è mostrato sotto nella lingua alternativa. Puoi cliccare sul link per cambiare la lingua attiva.

960 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

(English)

TECHNICAL SPECIFICATIONS

MODEL			DG-960-24	DG-960-48


OUTPUT	DC Output		24V	48V
	Rated Current		40A	10A
	Current Range Note 1		0~40A	0~10A
	Ripple and Noise	0~70℃	≤240mV	≤480mV
	Note 2	.-25℃	≤480mV	≤480mV
	Voltage ADJ. Range		24~28V	48~56V
	Voltage Accuracy		±3.0%
	Line Regulation		±0.5%
	Load Regulation		±1.0%
	Set-up Time		<1S@230VAC <2S@100VAC full load
	Hold up Time		≥20mS(230Vac input, Full load)
	Temperature Coefficient		±0.03%/ ℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		85Vac~264Vac, 220Vdc-370Vdc
	Frequency Range		47Hz~63Hz
	Power Factor (typical)		0.99/100Vac 0.98/230Vac full load
	Efficiency ( Typical) @ 230Vac		94.4%	93.8%
			≥84%
				≥88%
	AC Current (max.)		<11 A/100Vac <5.0A/230Vac
	Inrush Current (Typical)		＜ 30A/100Vac ＜ 60A/230Vac Cold start
	Leakage Current		≤1.18mA/2.82mA TN- TT-mains/IT-mains (264Vac input, 50Hz)
PROTECTION	Over Load		110%~150% of rated current, Constant current limiting for some time(150% of rated current, last 3S) then PS stop working for 7S,after 7S,if the load <=rated current, PS will work normally, auto recovery
	Over voltage		29~33V, hiccup mode, Auto recovery	58~63V, constant voltage, Auto recovery
	Over temperature		115±5℃, detect on temperature controller; shut down O/P, auto recovery after temperature goes down.
	Short Circuit		Long-term mode, auto recovery
ENVIRONMENT	Operating amb. Temp. & Hum.		.-25℃~70℃; 20%~90%RH No condensing D40
	Storage Temp. & Hum.		.-40℃~85℃; 5%~95%RH No condensing
SAFETY &EMC	Safety Standards		meet UL508, UL60950, EN60950
	Withstand Voltage		Primary-Secondary: 3.0KVac/20mA .Primary-PG: 2.5KVac/20mA. Secondary-PG: 0.5KVac/40mA.
			Output-DC OK: 0.5KVac/1mA
	Isolation Resistance		10M ohms

	EMC Emission		Compliance to EN55022, EN55024, FCC PART 15 CLASS A
	Harmonic Current		Compliance to EN61000-3-2, CLASS A
OTHERS	EMC Immunity		Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level
	MTBF (MIL-HDBK-217F)		More than 300,000Hrs (25℃, Full load) MIL-217 Method 2 Components Stress Method
	Dimension (LWH)		140124.6138.2mm
	Packing		6pcs/CTN, 15Kgs/CTN, 0.04cbm