Italiano
IT-DIN-960 Series
960 Watts Single Output Industrial DIN Rail Power Supply Series
- Universal AC input range(85~264Vac)
- Support 1+1 or N+1 redundant system（suggest to use redundancy modules.）
- Built-in active PFC,PF≥0.98
- High efficiency up to 94.5%
- Built-in current sharing function
- Built-in current limiting circuit
- Output protections: OVP/OLP/SCP/OTP
- Wide operating ambient temp (-25℃~70℃)
- Altitude up to 6000m
- 150% peak load capacity
- Easy Fuse Tripping due to High Overload Current
- Built-in DC OK relay contact
- Remote control output voltage
- Internal fault diagnose through LED light
- Can be installed on TS-35/7.5 or TS-35/15
- 100% full load burn-in test
- PCB soldering side with conformal coating
- Suitable for critical applications
- Ultra-slim,140mm width
- Free air convection
- 3 years warranty
- Description
- Technical Specifications
- Block Diagrams
- Mounting Methods
- Schematic Diagrams
- Graphs & Curves
- Mechanical Drawings
- Download / Documentation
- Contact US / Requests
Description
960 Watts Single Output Industrial DIN Rail Power Supply Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
| MODEL | DG-960-24 | DG-960-48 | ||
|---|---|---|---|---|
| OUTPUT | DC Output | 24V | 48V | |
| Rated Current | 40A | 10A | ||
| Current Range Note 1 | 0~40A | 0~10A | ||
| Ripple and Noise | 0~70℃ | ≤240mV | ≤480mV | |
| Note 2 | .-25℃ | ≤480mV | ≤480mV | |
| Voltage ADJ. Range | 24~28V | 48~56V | ||
| Voltage Accuracy | ±3.0% | |||
| Line Regulation | ±0.5% | |||
| Load Regulation | ±1.0% | |||
| Set-up Time | <1S@230VAC <2S@100VAC full load | |||
| Hold up Time | ≥20mS(230Vac input, Full load) | |||
| Temperature Coefficient | ±0.03%/ ℃ | |||
| Overshoot and Undershoot | <5.0% | |||
| INPUT | Voltage Range | 85Vac~264Vac, 220Vdc-370Vdc | ||
| Frequency Range | 47Hz~63Hz | |||
| Power Factor (typical) | 0.99/100Vac 0.98/230Vac full load | |||
| Efficiency ( Typical) @ 230Vac | 94.4% | 93.8% | ||
| ≥84% | ||||
| ≥88% | ||||
| AC Current (max.) | <11 A/100Vac <5.0A/230Vac | |||
| Inrush Current (Typical) | ＜ 30A/100Vac ＜ 60A/230Vac Cold start | |||
| Leakage Current | ≤1.18mA/2.82mA TN- TT-mains/IT-mains (264Vac input, 50Hz) | |||
| PROTECTION | Over Load | 110%~150% of rated current, Constant current limiting for some time(150% of rated current, last 3S) then PS stop working for 7S,after 7S,if the load <=rated current, PS will work normally, auto recovery | ||
| Over voltage | 29~33V, hiccup mode, Auto recovery | 58~63V, constant voltage, Auto recovery | ||
| Over temperature | 115±5℃, detect on temperature controller; shut down O/P, auto recovery after temperature goes down. | |||
| Short Circuit | Long-term mode, auto recovery | |||
| ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing D40 | ||
| Storage Temp. & Hum. | .-40℃~85℃; 5%~95%RH No condensing | |||
| SAFETY &EMC | Safety Standards | meet UL508, UL60950, EN60950 | ||
| Withstand Voltage | Primary-Secondary: 3.0KVac/20mA .Primary-PG: 2.5KVac/20mA. Secondary-PG: 0.5KVac/40mA. | |||
| Output-DC OK: 0.5KVac/1mA | ||||
| Isolation Resistance | 10M ohms | |||
| EMC Emission | Compliance to EN55022, EN55024, FCC PART 15 CLASS A | |||
| Harmonic Current | Compliance to EN61000-3-2, CLASS A | |||
| OTHERS | EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level | ||
| MTBF (MIL-HDBK-217F) | More than 300,000Hrs (25℃, Full load) MIL-217 Method 2 Components Stress Method | |||
| Dimension (L*W*H) | 140*124.6*138.2mm | |||
| Packing | 6pcs/CTN, 15Kgs/CTN, 0.04cbm |
Warning: Undefined variable $user_ID in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/comments.php on line 83
You must belogged in to post a comment.