IT-DIN-360 Series | Intellisystem Technologies

(English) IT-DIN-360 Series

(English)

360 Watts Single Output Industrial DIN Rail Power Supply Series

Universal AC input range(85~264Vac)
Support 1+1 or N+1 redundant system（suggest to use redundancy modules.）
Built-in active PFC,PF>0.95
High efficiency up to 93%
Built-in current sharing function
Built-in current limiting circuit
Output protections: OVP/OLP/SCP/OTP
Wide operating ambient temp (-25℃~70℃)
150% peak load capacity
Excellent Partial Load Efficiency
Built-in DC OK relay contact
Can be installed on TS-35/7.5 or TS-35/15
100% full load burn-in test
Suitable for critical applications
Ultra-slim, 50mm width
Free air convection
3 years warranty

Categories: Alimentatori Industriali, Barra DIN, Prodotti Tags: 10~70℃, 10A, 24~28V, 24V, 34~37.5V, 360 Watts, 36V, 47Hz~63Hz, 48~56V, 48V, 50*124*127mm, 5A, 7.5A, Guida DIN, Single Output

Description

Ci spiace, ma questo articolo è disponibile soltanto in English.

360 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

(English)

TECHNICAL SPECIFICATIONS

MODEL			IT-DIN-360-24	IT-DIN-360-36	IT-DIN-360-48
OUTPUT	DC Output		24V	36V	48V
	Rated Current		15A	10A	7.5A
	Current Range Note 1		0~15A	0~10A	0~7.5A
	Ripple and Noise	0~70℃	≤240mV	≤240mV	≤480mV

	Note 2	.-25℃	≤480mV	≤480mV	≤720mV
	Voltage ADJ. Range		24~28V	34~37.5V	48~56V
	Voltage Accuracy		±3.0%
	Line Regulation		±0.5%
	Load Regulation		±1.0%
	Set-up Time		<3S@230Vac
	Hold up Time		≥20mS(230Vac input, Full load)
	Temperature Coefficient		±0.03%/ ℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		85Vac~264Vac
	Frequency Range		47Hz~63Hz
	Power Factor (typical)		0.99/110Vac 0.95/230Vac full load
	Efficiency ( Typical) at 230Vac		≥93%	≥92.5%	≥92.5%
	AC Current (max.)		<5A/100Vac <2.5A/230Vac
	Inrush Current (Typical)		<20A/110Vac ， <40A/230Vac Cold start
	Leakage Current		Input—output:<0.25mA Input—PG:<3.5mA
			110%~150% of rated current, Constant current limiting for some time(150% of rated current, last 3S) then PS
PROTECTION	Over Load
			stop working for 7S,after 7S,if the load <=rated current, PS will work normally, auto recovery
			29~33V, constant voltage,	39~43V, constant voltage	58~63V, constant voltage
	Over voltage
			Auto recovery	Auto recovery	Auto recovery
	Over temperature		115±5℃, detect on heat sink of power transistor; shut down O/P, auto recovery after temperature goes down.
	Short Circuit		Long-term mode, auto recovery
	Operating amb. Temp. & Hum.		.-25℃~70℃; 20%~90%RH No condensing
ENVIRONMENT	Storage Temp. & Hum.		.-40℃~85℃; 5%~95%RH No condensing
	Safety Standards		meet UL508, UL60950, EN60950
SAFETY &EMC
	Withstand Voltage		Primary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 2.5KVac; ≤10mA. Secondary-PG: 0.5KVac≤20mA.
	Isolation Resistance		≥100M ohms
	EMC Emission		Compliance to EN55022, EN55024, FCC PART 15 Class B
	Harmonic Current		Compliance to EN61000-3-2, CLASS A
	EMC Immunity		Compliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level
	MTBF (MIL-HDBK-217F)		More than 300,000Hrs (25℃, Full load)
OTHERS	Dimension (WHD)		50124127mm