Italiano
IT-ISS FMA-120
The iNetVu® 120 Fixed Motorised Antenna system is a self-pointing auto-acquire unit that can be mounted either as a permanent installation or on a portable fxed base. The antenna works seamlessly with the iNetVu® 7024C Controller.
Intellisystem Technologies thanks to its strong partnership with C-Com Satellite Systems Inc. is not only their official systems distributors but also a system integrators with added value support and OEM enginering able to work on custom customer’s Industrial and Research & Development projects.
The FMA-120 system is easily confgured to provide instant access to satellite communications for any application that requires reliable and/ or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster Management, Construction, Mobile Offices, Emergency Services, Cellular Backhaul and many others.
Description
The Intellisystem Technologies Integrated Satellite Solutions (IT-ISS) provides two-way broadband satellite connectivity for non-terrestrial WAN Backup, IP multicast, and broadband internet access.
Features
• 1.2m Ofset, prime focus, thermoset-molded refector
• Designed to work with the iNetVu® 7024C controller
• Works seamlessly with the world’s most popular commercially available satellite modems
• 3 Axis motorization
• Supports manual control when required
• It is a cost efective solution for multi-satellite communication at any location
• One button, auto-pointing controller acquires any
• Ku-band satellite within 2 minutes
• One button, auto-pointing controller acquires any Locates satellites using the most advanced satellite acquisition methods
• Eliminates costly repointing and network downtime due to adverse weather conditions or areas where ground shifts occur (earthquakes, landslides, mine blast zones, etc…)
• Can be easily relocated when mounted on a semi-permanent platform without the need for any specialized equipment
• Any compatible fxed installation can be easily converted and upgraded to a fully motorized system
• Supports Prodelin 1.2m antenna, Model 1132 / 1134
• System designed for relatively large BUCs, 9 kg (Max.) weight for RF electronics (BUC and LNB)
• 1 year warranty
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Mechanical
| Antenna Size | 1.2m (48”) |
| Reflector Material | Glass reinforcedpolyester SMC |
| Platform Type | Three axis Motorized, |
| Galvanized steel | |
| Antenna optics | Prime Focus, offset feed, Linear Orthogonal |
| Mast Size | 2.5 SCH 80 pipe (3.00” OD) |
| Elevation Range | 0º to 90º |
| Azimuth Range | 340º |
| Polarization Range | ± 90º |
Environmental
| Wind Loading | |
| Operational | 72 km/h (45mph) |
| Survival | 200 km/h (125mph) |
| Temperature | |
| Operational | -30ºC to 55ºC (-22°F to 130°F) |
| Survival | -40ºC to 65ºC (-40°F to 150°F)) |
Electrical
| Elevation Motor | 24VDC |
| Azimuth Motor | 24VDC |
| Rx & Tx Cables | 2 RG6 Cables -15m (50 ft) each |
| Control Cables | |
| Standard | 15m (50 ft) Ext. Cable |
| Optional | Up to 60m (200 ft) available |
Ku-Band
| Receive Transmit | |
| Frequency (GHz) | 10.95 – 12.75 (1) 13.75 – 14.50 |
| Midband Gain (± .2dB) | 41.50 43.00 |
| Antenna Noise Temp. (K) | 20º EL= 46 /30º EL= 24 |
| Sidelobe Envelope Co-Pol (dBi) | |
| 1.5º <Θ <20º | 29-25 LogΘ |
| 20º <Θ < 26.3º | -3.5 |
| 26.3º <Θ < 48º | 32-25 LogΘ |
| 48º <Θ <180º | -10 Typical |
| Cross Polarization | -30 dB in 1dB contour |
| Any angle of axis | -25 dB (Max.) |
| Feed Interface | Type F or N WR 75 Isolation |
| (Port-to-Port) 35 dB | 80 dB |
| VSWR | 1.3:1 (Max.) |
Shipping Weights & Dimensions
| 1 Skid: 132 cm x 117 cm x 155 cm (52” x 46.1” x 61”) 170 kg (374.8 lbs) |
*The shipping weights/dims can vary for particular shipments depending on actual system confguration, quantity, packaging materials and special requirements
Notes: (1) LNB PLL Type required with stability better than ± 25 KHz
RSS - Posts
You must belogged in to post a comment.