RS232/485/422 Converters

Showing all 10 results

IT-3000-OCT

IT-3000-OCT is a type of RS-485/422 bus division concentrator of high performance. IT-3000-OCT adopts the unique equipotential differential isolation and bus division concentration technology to effectively such problems as ground potential difference, impedance matching and lightning strike frequently seen in engineering wiring process. Users can easily optimize the RS-485/RS-422 bus structure, divide the network section and improve the communication reliability. The fault network section shall be isolated in case of lightning strike or equipment faults to ensure the high communication reliability of other network sections. Such performance of IT-3000-OCT can significantly improve the reliability of existing RS-485/RS-422 network, and effectively shorten the network maintenance time. Reasonable utilization of IT-3000-OCT can enable you to design unique RS-485/RS-422 system.

- Read more
IT-SC422-TLC-25

Port-Powered RS232 to RS422 Converter

IT-SC422-TLC-25 is the interface converter between RS232 and RS422. It is powered from serial port (such as COM port of computer), no outside power needed. Small size, long transmission distance, high rate, stable performance. The IT-SC422-TLC-25 has a DB25 female connector on the RS232 side and either a DB25 male connector (or DB25M) on the RS422 side. It is used widely in the field of electricity, industrial automatic control, IC card billing system. It is a high quality low price data serial conversion product.

- Read more
IT-SC422-TLC-9

Port-Powered RS232 to RS422 Converter

IT-SC422-TLC-9 is the interface converter between RS232 and RS422. It is powered from serial port (such as COM port of computer), no outside power needed. Small size, long transmission distance, high rate, stable performance. The IT-SC422-TLC-9 has a DB9 female connector on the RS232 side and either a DB9 male connector or 5 bit terminal block on the RS422 side. It is used widely in the field of electricity, industrial automatic control, IC card billing system. It is a high quality low price data serial conversion product.

- Read more
IT-SC4485I-PSW

IT-SC4485I-PSW (12/48VDC) is RS-485 HUB is designed for RS-485 system in complicated electromagnetic environment. It supports a transmission rate up to 115.2KBPS, and adopts two-way transparent transmission, which allows one RS-485 bus or one RS-232 bus to be divided into 4 RS-485 buses, or any divided RS-485 signal to be transparently transmitted to host computer RS-485 or RS-232 hub. Each RS-485 port of slave computer is provided with reverse connection alarm and protection function, with which the reliability of existing RS-485 network is greatly improved, effectively reducing the network maintenance time. To ensure the security and reliability of data communication, the RS-485 ports are provided with 2KVAC isolation protection, level-4 electrostatic protection and level-2 radiated susceptibility, effectively preventing surge current, common ground and radiated interference, making the hub safe and reliable and suitable for outdoor application. IT-SC4485I-PSW (12/48VDC) also comes with RS-485 bus star connection. Users can easily improve RS-485 bus structure and divide the network segment. Proper utilization of IT-SC4485I-PSW (12/48VDC) can help design a unique and reliable RS-485 system. IT-SC4485I-PSW (12/48VDC) adopts EMC protection and supports DIN-rail installation, allowing it to be used reliably in severe environment at a temperature of -40℃~75℃.

- Read more
IT-SC485-TLC-25

Port-Powered RS232 to RS422 Converter

The IT-SC485-TLC-25 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.

- Read more
IT-SC485-TLC-9

Port-Powered RS232 to RS485 Converter

The IT-SC485-TLC-9 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.

- Read more
IT-SC485C-SW

Port-Power RS232 to RS485/422 Converter

The IT-SC485C-SW is an industrial grade bi-directional port-powered RS232 to RS485 or RS422 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port or four-wire balanced full duplex RS485 or RS422 port. In simple terms, it will convert any RS232 signal to a RS485 or RS422 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485/RS422 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The IT-SC485C-SW has a DB9 female connector on the RS232 side and either a DB9 male connector or 5 bit terminal block on the RS485/RS422 side.

- Read more
IT-SC485GI-SW

Industrial Isolation RS232/485/422 Converter and Repeater

IT-SC485GI-SW Can use for RS485/422 repeater and RS232 to RS485/422 converter, but just use one function at same time. The product must have 12-36VDC power input, optic- electrical isolation more than 3KV. Have small volume, 3000m transfer distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is a best performance and price interface converter and Repeater.

- Read more
IT-SC485P

Optical Isolation RS232 to RS485/422 Converter

IT-SC485P is a high performance, more function RS-232/485/422 interface converter. The product configure out connect power, optic-electrical isolation more than 2.5KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is an interface convert product that have good between performance to price. Adopt it self adapt interface technique, no use for setup switch.

- Read more
IT-SC485WA-SW

Port-Powered RS232 to RS-485 Converter

The IT-SC485WA-SW is an industrial grade bi-directional port-powered 2500V opto-isolated RS232 to RS485 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The IT-SC485WA-SW has a DB9 female connector on the RS232 side and either a DB9 male connector or 3 bit terminal block on the RS485 side.

- Read more

In descrizione l'intervista a Cristian Randieri, in riferimento alla vendita dei computer industriali. https://t.co/amcf2tXery

Intellisystem Technologies

Intellisystem Technologies S.r.l. - © All Rights Reserverd 2003-2021