IT-EMC-75S Series
75 Watts Single Output Series
- No Load power consumption<0.5W
- Withstand 300VA surge input for 5 sec.
- High Efficiency, High reliability and long life
- Output protections: OLP/OVP/SCP
- Wide operating ambient temperature (-25℃~70℃)
- Operating altitude up to 5000m
- All using 105℃ long life electrolytic capacitors.
- PCB soldering side with conformal coating
- 100% full load burn-in test
- 3 years warranty
Condividi su:
- Click to share on LinkedIn (Opens in new window)
- Click to share on Facebook (Opens in new window)
- Click to share on Pinterest (Opens in new window)
- Click to share on Twitter (Opens in new window)
- Click to share on WhatsApp (Opens in new window)
- Click to share on Reddit (Opens in new window)
- Click to share on Tumblr (Opens in new window)
- Click to share on Telegram (Opens in new window)
- Click to share on Pocket (Opens in new window)
- Click to email a link to a friend (Opens in new window)
- Click to print (Opens in new window)
- Description
- Technical Specifications
- Block Diagrams
- Graphs & Curves
- Mechanical Drawings
- Download / Documentation
- Contact US / Requests
Description
75 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
MODEL | IT-EMC-75S-5 | IT-EMC-75S-12 | IT-EMC-75S-15 | ||
---|---|---|---|---|---|
OUTPUT | DC Output | 5V | 12V | 15V | |
Rated Current | 12A | 6A | 5A | ||
Current Range Note 1 | 0~12A | 0~6A | 0~5A | ||
Ripple and Noise Note 2 | 0~70℃ | <50mV | <80mV | <80mV | |
.-25~0℃ | <80mV | <200mV | <200mV | ||
Voltage ADJ. Range | 4.75~5.5V | 11.4~13.2V | 14.25~16.5V | ||
Voltage Accuracy | ±1.0% | ||||
Line Regulation | ±0.5% | ||||
Load Regulation | ±1.0% | ||||
Set-up Time | ≤1S(230Vac input, Full load) | ||||
Hold up Time | ≥20mS(230Vac input, Full load) | ||||
Temperature Coefficient | ±0.03%/ ℃ | ||||
Overshoot and Undershoot | <5.0% | ||||
INPUT | Voltage Range | 90Vac~264Vac | |||
Frequency Range | 47Hz~63Hz | ||||
Efficiency ( Typical) | 0.79 | 0.84 | 0.86 | ||
AC Current (max.) | <2.5A | ||||
Inrush Current (Typical) | <60A@230Vac Cold start | ||||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz) | ||||
PROTECTION | Over Load | 12.6~18A | 6.3~9A | 5.25~7.5A | |
Protection type: 5V, hiccup mode; others, constant power, Auto recovery | |||||
Over Voltage | 5.5~7.5V | 13.2~18V | 16.5~22.5V | ||
Protection type: constant voltage, auto recovery | |||||
Short Circuit | Long-term mode, auto recovery | ||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing((refer to the derating curve) | |||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | ||||
SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1 : 2006 | |||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/ 10mA .Primary-PG:1.5KVac/ 10mA. Secondary-PG: 0.5KVDC/ 10mA. | |||
Isolation Resistance | 100M ohms | ||||
EMI Conduction& Radiation | Compliance to EN55022 Class B / FCC Part15 B | ||||
Harmonic Current | Compliance to EN61000-3-2, Class A | ||||
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | ||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | |||
Dimension (L*W*H) | 129×98×38mm | ||||
Packing | 30PCS/CTN, 14.2KGS, 0.044CBM | ||||
Cooling method | Cooling by free air convection |
MODEL | IT-EMC-75S-24 | IT-EMC-75S-48 | ||
---|---|---|---|---|
OUTPUT | DC Output | 24V | 48V | |
Rated Current | 3.2.A | 1.6A | ||
Current Range Note 1 | 0~3.2A | 0~1.6A | ||
Ripple and Noise Note 2 | 0~70℃ | <80mV | <120mV | |
.-25~0℃ | <200mV | <240mV | ||
Voltage ADJ. Range | 22.8~26.4V | 45.6~52.8V | ||
Voltage Accuracy | ±1.0% | |||
Line Regulation | ±0.5% | |||
Load Regulation | ±1.0% | |||
Set-up Time | ≤1S(230Vac input, Full load) | |||
Hold up Time | ≥20mS(230Vac input, Full load) | |||
Temperature Coefficient | ±0.03%/ ℃ | |||
Overshoot and Undershoot | <5.0% | |||
INPUT | Voltage Range | 90Vac~264Vac | ||
Frequency Range | 47Hz~63Hz | |||
Efficiency ( Typical) | 86.5% | 0.88 | ||
AC Current (max.) | <2.5A | |||
Inrush Current (Typical) | <60A@230Vac Cold start | |||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz) | |||
PROTECTION | Over Load | 3.36~4.8A | 1.7~2.43A | |
Protection type: 5V, hiccup mode; others, constant power, Auto recovery | ||||
Over Voltage | 26.4~36V | 52.8~72V | ||
Protection type: constant voltage, auto recovery | ||||
Short Circuit | Long-term mode, auto recovery | |||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing((refer to the derating curve) | ||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||
SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1 : 2006 | ||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/ 10mA .Primary-PG:1.5KVac/ 10mA. Secondary-PG: 0.5KVDC/ 10mA. | ||
Isolation Resistance | 100M ohms | |||
EMI Conduction& Radiation | Compliance to EN55022 Class B / FCC Part15 B | |||
Harmonic Current | Compliance to EN61000-3-2, Class A | |||
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | |||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||
Dimension (L*W*H) | 129×98×38mm | |||
Packing | 30PCS/CTN, 14.2KGS, 0.044CBM | |||
Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor.
Product Datasheet
Related products
-
IT-ES1024-IU-24F
24 ports 100Base-FX (SC/ST/FC) Unmanaged Industrial Ethernet Switch.
The IT-ES1024-IU-24F Industrial Ethernet switches consists of 24 Fiber ports that provide an economical solution for your industrial Ethernet connection. The IT-ES1024-IU-24F switches have an operating temperature range of -40 to 75°C, and are designed with low consumption and without fan. The rugged hardware design makes the IT-ES1024-IU-20F perfect for ensuring that your Ethernet equipment can withstand the rigors of industrial applications.
-
TT1640S-UAV
- Read moreSpecially designed for UAV, UAS, DRONEs with weight less than 160g, real time temperature measurement & store 16 bit fully radiometric IR-video into SD card while flying it provides leading-edge imaging performance and reliability in an affordable, compact, lightweight package.
View the object of interest with thermal vision.
With ThermalTronix TT1640S-UAV you will get all the thermal imager you need for UAV, UAS, DRONEs operations without having to pay for functionality you’ll never use.
ThermalTronix® is a trademark of Intellisystem Technologies – All Rights Reserved
-
IT-232-CAN
IT-232-CAN is used for data exchange between CAN-Bus field bus and RS-232 bus interface converter, and supports Modbus RTU protocol. IT-232-CAN interface converter integrated a RS-232 channel and a CAN-Bus channel can be easily embedded using RS-232 interface for communication nodes, do not need to change the original hardware architecture enables the device to obtain the CAN-Bus communication interface, to achieve between the equipments of RS-232 and CAN-Bus network connection and data communication. RS-232 channel IT-232-CAN devices to support a variety of baud rate, the range is 300bps~115200bps. CAN-Bus channel support CiA recommended a variety of standard baud rate and user-defined baud rate, the range of 2.5Kbps~1Mbps. IT-232-CAN interface converter provides three types of data conversion: transparent conversion, encryption conversion and Modbus protocol conversion. Its exterior design supports DIN-Rail mounting and Wall mounting, which is convenient for engineering application. The board comes with a photoelectric isolation module, complete electrical isolation control circuit and CAN-Bus communication circuit, so that the IT-232-CAN converter has a strong anti-interference ability, greatly improving the system in the harsh environment of the use of reliability.
-
IT-232D
IT-232D is a kind of RS-232 system communication extending product. This type of product auto sense serial rate transmission rate, no external power needed, optic electric isolation 2500V, be applicable in tough environment. Transmission distance at 9,600bps is 2,000m, stable performance. IT-232D has 2500 volts of isolation twice the rating of most isolators to protect RS-232 equipment from lightning strikes, accidental high voltage shorts and ground loops.
You must belogged in to post a comment.