PRODUCT DESCRIPTION
75 Watts Single Output Series
75 Watts Single Output Series
75 Watts Single Output Series
MODEL | IT-EMC-75S-5 | IT-EMC-75S-12 | IT-EMC-75S-15 | ||
---|---|---|---|---|---|
OUTPUT | DC Output | 5V | 12V | 15V | |
Rated Current | 12A | 6A | 5A | ||
Current Range Note 1 | 0~12A | 0~6A | 0~5A | ||
Ripple and Noise Note 2 | 0~70℃ | <50mV | <80mV | <80mV | |
.-25~0℃ | <80mV | <200mV | <200mV | ||
Voltage ADJ. Range | 4.75~5.5V | 11.4~13.2V | 14.25~16.5V | ||
Voltage Accuracy | ±1.0% | ||||
Line Regulation | ±0.5% | ||||
Load Regulation | ±1.0% | ||||
Set-up Time | ≤1S(230Vac input, Full load) | ||||
Hold up Time | ≥20mS(230Vac input, Full load) | ||||
Temperature Coefficient | ±0.03%/ ℃ | ||||
Overshoot and Undershoot | <5.0% | ||||
INPUT | Voltage Range | 90Vac~264Vac | |||
Frequency Range | 47Hz~63Hz | ||||
Efficiency ( Typical) | 0.79 | 0.84 | 0.86 | ||
AC Current (max.) | <2.5A | ||||
Inrush Current (Typical) | <60A@230Vac Cold start | ||||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz) | ||||
PROTECTION | Over Load | 12.6~18A | 6.3~9A | 5.25~7.5A | |
Protection type: 5V, hiccup mode; others, constant power, Auto recovery | |||||
Over Voltage | 5.5~7.5V | 13.2~18V | 16.5~22.5V | ||
Protection type: constant voltage, auto recovery | |||||
Short Circuit | Long-term mode, auto recovery | ||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing((refer to the derating curve) | |||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | ||||
SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1 : 2006 | |||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/ 10mA .Primary-PG:1.5KVac/ 10mA. Secondary-PG: 0.5KVDC/ 10mA. | |||
Isolation Resistance | 100M ohms | ||||
EMI Conduction& Radiation | Compliance to EN55022 Class B / FCC Part15 B | ||||
Harmonic Current | Compliance to EN61000-3-2, Class A | ||||
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | ||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | |||
Dimension (L*W*H) | 129×98×38mm | ||||
Packing | 30PCS/CTN, 14.2KGS, 0.044CBM | ||||
Cooling method | Cooling by free air convection |
MODEL | IT-EMC-75S-24 | IT-EMC-75S-48 | ||
---|---|---|---|---|
OUTPUT | DC Output | 24V | 48V | |
Rated Current | 3.2.A | 1.6A | ||
Current Range Note 1 | 0~3.2A | 0~1.6A | ||
Ripple and Noise Note 2 | 0~70℃ | <80mV | <120mV | |
.-25~0℃ | <200mV | <240mV | ||
Voltage ADJ. Range | 22.8~26.4V | 45.6~52.8V | ||
Voltage Accuracy | ±1.0% | |||
Line Regulation | ±0.5% | |||
Load Regulation | ±1.0% | |||
Set-up Time | ≤1S(230Vac input, Full load) | |||
Hold up Time | ≥20mS(230Vac input, Full load) | |||
Temperature Coefficient | ±0.03%/ ℃ | |||
Overshoot and Undershoot | <5.0% | |||
INPUT | Voltage Range | 90Vac~264Vac | ||
Frequency Range | 47Hz~63Hz | |||
Efficiency ( Typical) | 86.5% | 0.88 | ||
AC Current (max.) | <2.5A | |||
Inrush Current (Typical) | <60A@230Vac Cold start | |||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz) | |||
PROTECTION | Over Load | 3.36~4.8A | 1.7~2.43A | |
Protection type: 5V, hiccup mode; others, constant power, Auto recovery | ||||
Over Voltage | 26.4~36V | 52.8~72V | ||
Protection type: constant voltage, auto recovery | ||||
Short Circuit | Long-term mode, auto recovery | |||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing((refer to the derating curve) | ||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||
SAFETY &EMC | Safety Standards | UL60950-1; EN60950-1 : 2006 | ||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/ 10mA .Primary-PG:1.5KVac/ 10mA. Secondary-PG: 0.5KVDC/ 10mA. | ||
Isolation Resistance | 100M ohms | |||
EMI Conduction& Radiation | Compliance to EN55022 Class B / FCC Part15 B | |||
Harmonic Current | Compliance to EN61000-3-2, Class A | |||
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | |||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||
Dimension (L*W*H) | 129×98×38mm | |||
Packing | 30PCS/CTN, 14.2KGS, 0.044CBM | |||
Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor.
480 Watts Single Output Industrial DIN Rail Power Supply Series
8-ports 10/100Base-T(x) (POE) + 1-port Gigabit Combo.
IT-IPS-319-IU-1GC-8-POE is an industrial grade, unmanaged and redundancy POE switch. The switch provides 8 ports 10/100M Ethernet and 1 ports combo Gigabit SFP slots or 10/100/1000Base-T(X) ports, which 8 ports Ethernet supports POE function (IEEE802.3af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x/ with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, the -40~75℃ working temperature, can meet all kinds of Industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.
360 Watts Single Output Industrial DIN Rail Power Supply Series
IT-232D is a kind of RS-232 system communication extending product. This type of product auto sense serial rate transmission rate, no external power needed, optic electric isolation 2500V, be applicable in tough environment. Transmission distance at 9,600bps is 2,000m, stable performance. IT-232D has 2500 volts of isolation twice the rating of most isolators to protect RS-232 equipment from lightning strikes, accidental high voltage shorts and ground loops.