IT-EMC-200PFC Series
200 Watts Single Output Series
- Universal AC input (90~264Vac)
- Built-in active PFC,PF>0.95
- Withstand 300Vac surge input for 5 sec
- High efficiency, long life and high reliability
- Output protection: SCP/OLP/OPP
- Wide operating ambient temperature (-20~65℃)
- Operating altitude up to 5000m
- PCB both sides with conformal coating
- All using 105 ℃ long life electrolytic capacitor
- 100% full load burn-in test
- Built-in cooling fan speed control
- 3 years warranty
Condividi su:
- Click to share on LinkedIn (Opens in new window)
- Click to share on Facebook (Opens in new window)
- Click to share on Pinterest (Opens in new window)
- Click to share on Twitter (Opens in new window)
- Click to share on WhatsApp (Opens in new window)
- Click to share on Reddit (Opens in new window)
- Click to share on Tumblr (Opens in new window)
- Click to share on Telegram (Opens in new window)
- Click to share on Pocket (Opens in new window)
- Click to email a link to a friend (Opens in new window)
- Click to print (Opens in new window)
- Description
- Technical Specifications
- Block Diagrams
- Graphs & Curves
- Mechanical Drawings
- Download / Documentation
- Contact US / Requests
Description
200 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
MODEL | IT-EMC-200PFC-12II | IT-EMC-200PFC- 24II | IT-EMC-200PFC-36II | IT-EMC-200PFC-48II | ||
---|---|---|---|---|---|---|
OUTPUT | DC Output | 12V | 24V | 36V | 48V | |
Rated Current | 16.7A | 8.4A | 5.6A | 4.2A | ||
Current Range Note 1 | 0~16.7A | 0~8.4A | 0~5.6A | 0~4.2A | ||
Ripple and Noise Note 2 | 0~65C | ≤150mV | ≤150mV | ≤200mV | ≤150mV | |
-20~0C | ≤200mV | ≤200mV | ≤200mV | ≤200mV | ||
Voltage ADJ. Range | 9~15V | 20~27V | 32~40V | 40~53V | ||
Voltage Accuracy | ±2.0% | ±1.0% | ||||
Line Regulation | ±0.5% | |||||
Load Regulation | ±2.0% | ±1.0% | ||||
Set-up Time | ≤2S (230Vac input, Full load) ≤4S (120Vac input, Full load) | |||||
Hold up Time | ≥12mS (230Vac input, Full load) | |||||
Temperature Coefficient | ±0.03%/℃ | |||||
Overshoot and Undershoot | <5.0% | |||||
INPUT | Voltage Range | 90Vac~264Vac,120Vdc~370Vdc | ||||
Frequency Range | 47Hz--63Hz | |||||
Power Factor(Typical) | PF > 0.98/115VAC PF > 0.95/230VAC | |||||
Efficiency ( Typical) @ 230Vac | ≥84% | ≥87% | ≥86.5% | ≥87% | ||
AC Current (max.) | < 3.5A | |||||
Inrush Current (Typical) | <50A@220Vac <30A@110Vac Cold start | |||||
Leakage Current | Input—Output:<0.25mA Input—PG:<3.5mA | |||||
PROTECTION | Over Load | 18~30A | 10~15A | 5.88~8.8A | 5~7.56A | |
Protection type: Hiccup mode, auto recovery | ||||||
Over power | 216~360W | 240~360W | 210~320W | 240~363W | ||
Protection type: Hiccup mode, auto recovery | ||||||
Short Circuit | Long-term mode, auto recovery | |||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-20℃~65℃; 20%~90%RH No condensing(refer to the derating curve) | ||||
Vibration | 10 ~ 150Hz, 2G 10min./1cycle, period for60min. each along X,Y, Z axes | |||||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||||
(Note 3) | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤10mA. | ||||
Isolation Resistance | 10M ohms | |||||
EMI Conduction&Radiation | Compliance to EN55022 EN55024 FCC PART 15 Class B | |||||
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; | |||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||||
Dimension (L*W*H) | 199×99×50mm | |||||
Packing | 12PCS/CTN, 11.4KGS, 0.04CBM | |||||
Cooling method | Cooling by forced air (built-in DC fan) | |||||
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
Product Datasheet
Related products
-
IT-IPS-618-IM-4-POE
4-ports 10/100Base-T(x) (POE) + 4-ports 10/100Base-T(x).
IT-IPS-618-IM-4-POE is an industrial grade, managed and redundancy Ethernet switch. The switch provides 8 ports 10/100M Ethernet and 4 ports 10/100M Ethernet PoE, which 4 ports Ethernet supports POE function (IEEE 802.3af/at). It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring and fault alarm. SW-Ring™ can bring your Ethernet to intelligent redundancy. The -40~75℃ working temperature, can meet all kinds of Industrial environment requirement and provide the solution of the economy.
-
IT-IPS-215-IU-F-4-POE
4-ports 10/100M Base-T (x) PoE + 1-port 100Base-FX.
The IT-IPS-215-IU-F-4-POE switch is a kind of unmanaged industrial Gigabit PoE switch, it support 4 10/100Base-T(X) ports and 1 100Base-FX Fiber port. The 4 fast Ethernet port (1~4) support Power-over -Ethernet (PoE) function. The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x/ with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing reliable and economic solution for your industrial Ethernet network.
-
IT-SHZ33-A-WL
With 10 high power LEDs for a total power consumption of 20W, beam angle 15° to 90°, beam distance 40m to 5m, the IT-SHZ33-A-WL is a high service of life Camera Housing with built-in White Light Illuminator.
- Wavelenght 400-780nm.
- 30,000 hours lifetime LEDs.
- Extended working temperature range -40 to 60°C.
- 1-2 years warranty.
The IT-SHZ33-A-WL is part of the High-Power Camera Housing with built-in White Light Illuminator series that is the quality LED light source solution for night-time illumination, providing high-power light for CCTV and IP cameras to enhance night-time visual performance with colorful images.
-
IT-SS200LM-IRL
- Highway monitoring system
- PTZ monitoring system
- Ports
- Forest Fire Prevention
- Infrared imaging
- Military application
You must belogged in to post a comment.