Menu
≡
╳
Menu
≡
╳
(English)
IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, IT-FL45M1000-SP made by the high response surge arresters, the advantage allow clamping voltage and low loss against high speed signal, because it had a low capacitance. Designed to protect data communication lines in local and wide area networks up to 1000Base-TX transmission speeds.
Ci spiace, ma questo articolo è disponibile soltanto in Inglese Americano. Per ragioni di convenienza del visitatore, il contenuto è mostrato sotto nella lingua alternativa. Puoi cliccare sul link per cambiare la lingua attiva.
(English)
Technology
Standard: 10Base-T/100Base-TX/1000Base-TX standard
10/100/1000M signal: IEC6100-4-5 and ITU-TK20&21
Nominal discharge current(In):5 KA(8/20μS)
Working voltage: 0-5V
Limit voltage: ≤40V
Apply Band rate: 1000Mbps
Connector: RJ45 (F)
The line of protection: 4 lines (1, 2, 3, 6)
Insert consumption: ≤0.5dB
Delay time: ≤1ns
Working temperature:-20 to 60°C
Storage temperature:-25 to 85°C
Humidity: Relative humidity 5% to 95%
No power supply needed, No consumption
L×W×H: 72mm×42mm×25mm
Shell: Alnico
Color: Blue
Weight: 10g
Certifications
Con 10 LED ad alta potenza per un consumo totale di 20W, un angolo di apertura del fascio luminoso compreso tra 15° e 90° capace di coprire una distanza compresa tra 40m e 5m, l’IT-SHZ33-A-WL è una Custodia per Telecamere con Illuminatore a Luce Bianca integrato caratterizzata da un’elevata garanzia di servizio.
L’IT-SHZ33-A-WL fa parte della serie Custodie per Telecamera con Illuminatore a Luce Bianca integrato di Intellisystem Technologies che rappresenta la soluzione di qualità per l’illuminazione notturna a LED, atta a fornire una luce ad alta potenza per illuminare la scena di telecamere CCTV e IP. Tali prodotti sono stati appositamente progettati per garantire ottimi risultati e performance in termini di illuminazione e colori.
IT-232-CAN is used for data exchange between CAN-Bus field bus and RS-232 bus interface converter, and supports Modbus RTU protocol. IT-232-CAN interface converter integrated a RS-232 channel and a CAN-Bus channel can be easily embedded using RS-232 interface for communication nodes, do not need to change the original hardware architecture enables the device to obtain the CAN-Bus communication interface, to achieve between the equipments of RS-232 and CAN-Bus network connection and data communication. RS-232 channel IT-232-CAN devices to support a variety of baud rate, the range is 300bps~115200bps. CAN-Bus channel support CiA recommended a variety of standard baud rate and user-defined baud rate, the range of 2.5Kbps~1Mbps. IT-232-CAN interface converter provides three types of data conversion: transparent conversion, encryption conversion and Modbus protocol conversion. Its exterior design supports DIN-Rail mounting and Wall mounting, which is convenient for engineering application. The board comes with a photoelectric isolation module, complete electrical isolation control circuit and CAN-Bus communication circuit, so that the IT-232-CAN converter has a strong anti-interference ability, greatly improving the system in the harsh environment of the use of reliability.
86 Cube Vandal Proof Anti Echo Digital Pickup
4-ports 10/100Base-T(x) (POE) + 2-ports 100Base-FX + 2-ports 10/100Base-T(x).
IT-IPS-618-IM-2F-4-POE is an industrial grade, managed and redundancy Ethernet switch. The switch provides 4 ports 10/100M Ethernet PoE, 4 ports 10/100M Ethernet and 2 ports fast Ethernet optical, which 4 ports Ethernet supports POE function (IEEE 802.3af/at). It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring and fault alarm. SW-Ring™ can bring your Ethernet to intelligent redundancy. The -40～75℃ working temperature, can meet all kinds of Industrial environment requirement and provide the solution of the economy.
SideBarMenu
≡
╳
Intellisystem Technologies S.r.l. - © All Rights Reserverd 2003-2021
English
RSS - Articoli