(English) IT-EMC-800PFC Series

(English)

800 Watts Single Output with Active PFC Series

  • Universal AC input (90~264Vac)
  • Built-in active PFC function, PF>0.96
  • Using ZVS technology to reduce power dissipation
  • Output protection: OVP/OLP/SCP/OPP/OTP
  • Built in Fan speed control
  • Built in AC inrush current limiting circuit(<20A)
  • Build in constant current limiting circuit
  • Built in Remote Sense Function
  • Build in DC OK signal
  • Wide operating ambient temperature (-30℃~70℃)
  • 1 U low profile, 41mm
  • 3 years warranty

DESCRIZIONE PRODOTTO

Ci spiace, ma questo articolo è disponibile soltanto in Inglese Americano. Per ragioni di convenienza del visitatore, il contenuto è mostrato sotto nella lingua alternativa. Puoi cliccare sul link per cambiare la lingua attiva.

800 Watts Single Output with Active PFC Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

(English)

TECHNICAL SPECIFICATIONS

MODELIT-EMC-800PFC-24IT-EMC-800PFC-48
OUTPUTDC Output24V48V
Rated Current 33A16.5A
Ripple and Noise Note 2≤200mV≤200mV
Voltage ADJ. Range21.6~26.4V43.2~52.8V
Voltage Accuracy ±2%
Line Regulation±0.5%
Load Regulation±2%
Set-up Time≤3S (220Vac input, Full load)
Hold up Time ≥8mS (220Vac input, Full load)
Temperature Coefficient±0.03%/℃
Overshoot and Undershoot<5.0%
INPUTVoltage Range 90Vac~264Vac,127Vdc~370Vdc
Frequency Range47Hz--63Hz
Power Factor(Typical)PF≥0.96/230VAC PF≥0.98/115VAC Full Load
Efficiency ( Typical)≥89%≥89%
AC Current (max.)≤12 A
Inrush Current (Typical)≤20A @220Vac Cold start
Leakage CurrentInput—output: ≤0.25mA Input—PG: ≤3.5mA
PROTECTIONOver Load36.3~44.55A, Constant current, auto recovery18.15~22.3A, Constant current, auto recovery
Over power871.2~1069.2W, Constant current, auto recovery871.2~1069.2W, Constant current, auto recovery
Over Voltage27.6~36V, Constant voltage, auto recovery55.2~60V, Constant voltage, auto recovery
Over Temperature105℃+5℃(detect on Mosfet temperature);shut down,auto recovery after the temperature goes down to 70℃
Short CircuitLong-term mode, constant current, auto recovery
ENVIRONMENTOperating amb. Temp. & Hum..-30℃~70℃; 20%~90%RH No condensing (refer to derating curve)
Storage Temp. & Hum..-40℃~85℃; 10%~95%RH No condensing
SAFETY &EMCSafety StandardsUL60950-1 2nd Ed; IEC 60950-1:2005(2nd Ed) ;EN60950-1:2006
(Note 3)Withstand VoltagePrimary-Secondary: 3.0KVac/10mA .Primary-PG:1.5KVac/10mA. Secondary-PG: 0.5KVac/10mA.
Isolation Resistance10M ohms
EMI Conduction&RadiationCompliance to EN55022 FCC PART 15 CLASS B
Harmonic CurrentCompliance to EN61000-3-2,Class D
EMS ImmunityCompliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level
OTHERSMTBF (MIL-HDBK-217F)More than 200,000Hrs (25℃, Full load)
Dimension (L*W*H)226×116.5×41mm
Packing12PCS/CTN, 16.8KGS, 0.04CBM
Cooling methodFored air cooling(Built-in fan,the fan speed is controlled by load and internal temp.)

 

NOTES:

1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.

2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor.

(English) IT-EMC-800PFC Series
(English) IT-EMC-800PFC Series
(English) IT-EMC-800PFC Series
(English) IT-EMC-800PFC Series
(English) IT-EMC-800PFC Series
(English) IT-EMC-800PFC Series
(English) IT-EMC-800PFC Series
(English) IT-EMC-800PFC Series

Datasheet Prodotto

Intellisystem Technologies