(English) IT-EMC-50S Series
(English)
50 Watts Single Output Series
- No Load power consumption<0.5W
- Universal AC input range (88~264Vac)
- Miniature size, high power density, high efficiency, long life and high reliability
- Withstand 300VA surge input for 5 sec.
- Output protections: OLP/OVP/SCP
- Wide operating ambient temp (-25℃~70℃)
- All using 105℃ long life electrolytic capacitors.
- 100% full load burn-in test
- Easy assembling from top side
- PCB soldering side with conformal coating
- Suitable for critical applications
- 3 years warranty
Condividi su:
- Fai clic qui per condividere su LinkedIn (Si apre in una nuova finestra)
- Fai clic per condividere su Facebook (Si apre in una nuova finestra)
- Fai clic qui per condividere su Pinterest (Si apre in una nuova finestra)
- Fai clic qui per condividere su Twitter (Si apre in una nuova finestra)
- Fai clic per condividere su WhatsApp (Si apre in una nuova finestra)
- Fai clic qui per condividere su Reddit (Si apre in una nuova finestra)
- Fai clic qui per condividere su Tumblr (Si apre in una nuova finestra)
- Fai clic per condividere su Telegram (Si apre in una nuova finestra)
- Fai clic qui per condividere su Pocket (Si apre in una nuova finestra)
- Fai clic per inviare un link a un amico via e-mail (Si apre in una nuova finestra)
- Fai clic qui per stampare (Si apre in una nuova finestra)
- Descrizione
- Specifiche Tecniche
- Diagrammi a Blocchi
- Grafici e Curve
- Disegni Meccanici
- Documenti / Download
- Contattaci / Richieste
Descrizione
Ci spiace, ma questo articolo è disponibile soltanto in English.
50 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
(English)
TECHNICAL SPECIFICATIONS
MODEL | IT-EMC-50S-5 | IT-EMC-50S-12 | IT-EMC-50S-15 | |||
---|---|---|---|---|---|---|
OUTPUT | DC Output | 5V | 12V | 15V | ||
Rated Current | 8A | 4.2A | 3.4A | |||
Current Range | 0~8A | 0~4.2A | 0~3.4A | |||
Ripple and Noise Note 2 | 0~70℃ | <80mV | <120mV | <120mV | ||
.-25-0℃ | <80mV | <200mV | <200mV | |||
Voltage ADJ. Range | 4.75~5.5V | 11.4~13.2V | 22.8~26.4V | |||
Voltage Accuracy | ±3.0% | |||||
Line Regulation | ±0.5% | |||||
Load Regulation | ±1.0% | |||||
Set-up Time | < 1.5S (230Vac input, Full load) | |||||
Hold up Time | > 50mS(230Vac input, Full load) | |||||
Temperature Coefficient | ±0.03%/℃ | |||||
Overshoot and Undershoot | <5.0% | |||||
INPUT | Voltage Range | 88Vac~264Vac , 127~370Vdc | ||||
Frequency Range | 47Hz~63Hz | |||||
Efficiency ( Typical) | 115Vacinput | 0.79 | 82.5% | 83.5% | ||
230Vacinput | 0.8 | 84.5% | 85.5% | |||
AC Current (max.) | <1.3A | |||||
Inrush Current (Typical) | <45A@230Vac Cold start | |||||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (input 264Vac, 63Hz) | |||||
PROTECTION | Over Load | 8.4~12A | 4.41~6.3A | 2.31~3.3a | ||
Protection type: 5V is hiccup mode, rest are constant power, auto recovery | ||||||
Over Voltage | 5.75~7.5V | 13.8~18V | 27.6~36v | |||
Protection type: constant voltage, auto recovery | ||||||
Short Circuit | Long-term mode, auto recovery | |||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | ||||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/10mA .Primary-PG:1.5KVac/10mA. Secondary-PG: 0.5KVDC/10mA. | ||||
Isolation Resistance | 100M ohms | |||||
EMC Emission | Compliance to EN55022 Class B / FCC Part15 Class B | |||||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level | |||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||||
Dimension (L*W*H) | 99×82×35mm | |||||
Packing | 40PCS/CTN, 12.8KGS, 0.043CBM | |||||
Cooling method | Cooling by free air convection |
MODEL | IT-EMC-50S-24 | IT-EMC-50S-48 | ||
---|---|---|---|---|
OUTPUT | DC Output | 24V | 48V | |
Rated Current | 2.2A | 1.12A | ||
Current Range | 0~2.2A | 0~1.12A | ||
Ripple and Noise Note 2 | <200mV | <200 mV | ||
<300mV | <500mV | |||
Voltage ADJ. Range | 22.8~26.4V | 45.6~52.8V | ||
Voltage Accuracy | ±3.0% | |||
Line Regulation | ±0.5% | |||
Load Regulation | ±1.0% | |||
Set-up Time | < 1.5S (230Vac input, Full load) | |||
Hold up Time | > 50mS(230Vac input, Full load) | |||
Temperature Coefficient | ±0.03%/℃ | |||
Overshoot and Undershoot | <5.0% | |||
INPUT | Voltage Range | 88Vac~264Vac , 127~370Vdc | ||
Frequency Range | 47Hz~63Hz | |||
Efficiency ( Typical) | 115Vacinput | 0.85 | 86.5% | |
230Vacinput | 0.87 | 88.5% | ||
AC Current (max.) | <1.3A | |||
Inrush Current (Typical) | <45A@230Vac Cold start | |||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA (input 264Vac, 63Hz) | |||
PROTECTION | Over Load | 2.31~3.3A | 1.155~1.65A | |
Protection type: 5V is hiccup mode, rest are constant power, auto recovery | ||||
Over Voltage | 27.6~36V | 55.2~72V | ||
Protection type: constant voltage, auto recovery | ||||
Short Circuit | Long-term mode, auto recovery | |||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | ||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/10mA .Primary-PG:1.5KVac/10mA. Secondary-PG: 0.5KVDC/10mA. | ||
Isolation Resistance | 100M ohms | |||
EMC Emission | Compliance to EN55022 Class B / FCC Part15 Class B | |||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level | |||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||
Dimension (L*W*H) | 99×82×35mm | |||
Packing | 40PCS/CTN, 12.8KGS, 0.043CBM | |||
Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
Datasheet Prodotto
Prodotti correlati
-
(English) IT-IPS-318-IU-8-POE
(English)- Leggi tutto8-ports 10/100Base-T(x) POE.
IT-IPS-318-IU-8-POE is an industrial grade, unmanaged and redundancy POE switch. The switch provides 8 ports 10/100M Ethernet, which supports POE function (IEEE 802.3af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x/ with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, the -40~75℃ working temperature, can meet all kinds of Industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.
-
(English) IT-DIN-360 Series
(English)- Leggi tutto360 Watts Single Output Industrial DIN Rail Power Supply Series
- Universal AC input range(85~264Vac)
- Support 1+1 or N+1 redundant system(suggest to use redundancy modules.)
- Built-in active PFC,PF>0.95
- High efficiency up to 93%
- Built-in current sharing function
- Built-in current limiting circuit
- Output protections: OVP/OLP/SCP/OTP
- Wide operating ambient temp (-25℃~70℃)
- 150% peak load capacity
- Excellent Partial Load Efficiency
- Built-in DC OK relay contact
- Can be installed on TS-35/7.5 or TS-35/15
- 100% full load burn-in test
- Suitable for critical applications
- Ultra-slim, 50mm width
- Free air convection
- 3 years warranty
-
(English) IT-ES1024-IU-24F
(English)- Leggi tutto24 ports 100Base-FX (SC/ST/FC) Unmanaged Industrial Ethernet Switch.
The IT-ES1024-IU-24F Industrial Ethernet switches consists of 24 Fiber ports that provide an economical solution for your industrial Ethernet connection. The IT-ES1024-IU-24F switches have an operating temperature range of -40 to 75°C, and are designed with low consumption and without fan. The rugged hardware design makes the IT-ES1024-IU-20F perfect for ensuring that your Ethernet equipment can withstand the rigors of industrial applications.
-
(English) IT-IPS-215-IU-4-POE
(English)- Leggi tutto4-ports 10/100M Base-T(x) PoE + 1-port 10/100M Base-T(x).
The IT-IPS-215-IU-4-POE switch is a kind of unmanaged industrial PoE switch, it support 5 10/100Base-T(X) ports. The 4 Fast Ethernet port (1~4) support Power-over -Ethernet (PoE) function. The switches are classified as power source equipment (PSE), and when used in this way, the IT-IPS-215-IU-4-POE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, IT-IPS-215-IU-4-POE adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing reliable and economic solution for your industrial Ethernet network
You must belogged in to post a comment.