English
(English) IT-EMC-150PFC Series
(English)
150 Watts Single Output Series
- No Load power consumption<0.5W
- Universal AC input range
- Miniature size, high power density, high efficiency, long life and high reliability
- Withstand 300VA surge input for 5 sec.
- Output protections: OLP/OPP/SCP
- Wide operating ambient temp (-20℃~70℃)
- All using 105℃ long life electrolytic capacitors.
- 100% full load burn-in test
- PCB soldering side with conformal coating
- Suitable for critical applications
- 3 years warranty
- Description
- Specifiche Tecniche
- Diagrammi a Blocchi
- Grafici e Curve
- Disegni Meccanici
- Documenti / Download
- Contattaci / Richieste
Description
150 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
(English)
TECHNICAL SPECIFICATIONS
| MODEL | IT-EMC-150PFC-12 | IT-EMC-150PFC-15 | IT-EMC-150PFC-24 | IT-EMC-150PFC-48 | ||
|---|---|---|---|---|---|---|
| OUTPUT | DC Output | 12V | 15V | 24V | 48V | |
| Rated Current | 12.5A | 10A | 6.3A | 3.2A | ||
| Current Range Note 1 | 0~12.5A | 0~10A | 0~6.3A | 0~3.2A | ||
| Ripple and Noise Note 2 | 0~70℃ | ≤100mV | ≤100mV | ≤100mV | ≤100mV | |
| .-20~0℃ | ≤200mV | ≤200mV | ≤200mV | ≤200mV | ||
| Voltage ADJ. Range | 10.8~13.2V | 13.5~16.5V | 21.6~26.4V | 43.2~52.8V | ||
| Voltage Accuracy | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ||
| Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||
| Load Regulation | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ||
| Set-up Time | ≤3S /115Vac ， ≤2S /230Vac full load | |||||
| Hold up Time | ≥10mS (220Vac input, Full load) | |||||
| Temperature Coefficient | ±0.03%/℃ | |||||
| Overshoot and Undershoot | <5.0% | |||||
| INPUT | Voltage Range | 90Vac~264Vac, 120~370Vdc | ||||
| Frequency Range | 47Hz~63Hz | |||||
| Power factor (typical) | PF ＞ 0.98@115Vac, PF ＞ 0.95@230Vac | |||||
| Efficiency (Typical) | 230Vac input | ≥86% | ≥87% | ≥88% | ≥88% | |
| 115Vac input | ≥82.5% | ≥82.5% | ≥85% | ≥83.9% | ||
| AC Current (max.) | ＜ 2 A | |||||
| Inrush Current (Typical) | ＜ 30A/115Vac,<45A/230Vac Cold start | |||||
| Leakage Current | Input—output: ≤0.25mA Input—PG: ≤3.5mA (input 264Vac, 63Hz) | |||||
| PROTECTION | Over Load | 13.125~18.75A | 10.5~17A | 6.93~9.45A | 3.36~4.8A | |
| Protection type: Hiccup mode, auto recovery | ||||||
| Over power | 160~225W | 160~255W | 160~225W | 160~225W | ||
| Protection type: Hiccup mode, auto recovery | ||||||
| Over Voltage | 14~18V | 17.8~22.5V | 27~36V | 52.5~72V | ||
| Protection type: Hiccup mode, auto recovery | ||||||
| Over Temperature | 105℃+5℃(detect on Mosfet temperature);shut down, auto recovery after the temperature goes down to 50℃ | |||||
| Short Circuit | Long-term mode, auto recovery | |||||
| ENVIRONMENT | Operating amb. Temp. & Hum. | .-20℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | ||||
| Storage Temp. & Hum. | .-30℃~85℃; 10%~95%RH No condensing | |||||
| SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||||
| Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/10mA .Primary-PG:1.5KVac/10mA. Secondary-PG: 0.5KVDC/ 10mA. | ||||
| Isolation Resistance | 10M ohms | |||||
| EMS Emission | Compliance to EN55022 Class B | |||||
| Harmonic Current | Compliance to EN61000-3-2, Class D | |||||
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level | |||||
| OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||||
| Dimension (L*W*H) | 160×99×38mm | |||||
| Packing | 20PCS/CTN, 14KGS, 0.04CBM | |||||
| Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
RSS - Articoli
You must belogged in to post a comment.