English
(English) IT-EMC-100PFC Series
(English)
100 Watts Single Output Series
- Universal AC input range
- Built-in Active PFC function, PF>0.93
- Miniature size,high power density,high efficiency,long life and high reliability
- Withstand 300VA surge input for 5 secs.
- Output protections: OLP/SCP/OPP
- Wide operating ambient temp (-20℃~60℃)
- All using 105℃ long life electrolytic capacitors.
- 100% full load burn-in test
- Easy assembling from top side
- PCB soldering side with conformal coating
- Suitable for critical applications
- 3 years warranty
- Description
- Specifiche Tecniche
- Diagrammi a Blocchi
- Grafici e Curve
- Disegni Meccanici
- Documenti / Download
- Contattaci / Richieste
Description
100 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
(English)
TECHNICAL SPECIFICATIONS
| MODEL | IT-EMC-100PFC-5 | IT-EMC-100PFC-12 | IT-EMC-100PFC-24 | IT-EMC-100PFC-48 | ||
|---|---|---|---|---|---|---|
| OUTPUT | DC Output | 5V | 12V | 24V | 48V | |
| Rated Current | 20A | 8.5A | 4.2A | 2.2A | ||
| Current Range Note 1 | 0~20A | 0~8.5A | 0~4.2A | 0~2.2A | ||
| Ripple and Noise Note 2 | 0~70℃ | ≤150mV | ≤150mV | ≤150mV | ≤150mV | |
| .-20~0℃ | ≤150mV | ≤150mV | ≤150mV | ≤200mV | ||
| Voltage ADJ. Range | 3.3V—5.5V | 10~15V | 21~27V | 43.2~52.8V | ||
| Voltage Accuracy | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ||
| Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||
| Load Regulation | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ||
| Set-up Time | ≤4S @115Vac ， ≤2S @230Vac | |||||
| Hold up Time | ≥12mS (230Vac input, Full load) | |||||
| Temperature Coefficient | ±0.03%/℃ | |||||
| Overshoot and Undershoot | <5.0% | |||||
| INPUT | Voltage Range | 90Vac~264Vac | ||||
| Frequency Range | 47Hz~63Hz | |||||
| Power factor (typical) | PF ＞ 0.98@115Vac, PF ＞ 0.93@230Vac | |||||
| Efficiency (Typical) 230Vac input | ≥84% | ≥87% | ≥88% | ≥88% | ||
| AC Current (max.) | ＜ 1.5 A | |||||
| Inrush Current (Typical) | ＜ 30@115Vac,<50A@230Vac Cold start | |||||
| Leakage Current | Input—output: ≤0.25mA Input—PG: ≤3.5mA | |||||
| PROTECTION | Over Load | 110%~150% of rated output current, hiccup mode, auto recovery | ||||
| Over power | 110%~150% of rated output current, hiccup mode, auto recovery | |||||
| Short Circuit | Long-term mode, auto recovery | |||||
| ENVIRONMENT | Operating amb. Temp. & Hum. | .-20℃~60℃; 20%~90%RH No condensing (refer to the derating curve) | ||||
| Storage Temp. & Hum. | .-30℃~85℃; 10%~95%RH No condensing | |||||
| SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||||
| Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤ 10mA. | ||||
| Isolation Resistance | 100M ohms | |||||
| EMS Emission | Compliance to EN55022 Class B | |||||
| Harmonic Current | Compliance to EN61000-3-2, Class A | |||||
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level | |||||
| OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||||
| Dimension (L*W*H) | 129×98.3×37.6mm | |||||
| Packing | 30PCS/CTN, 14.6KGS, 0.04CBM | |||||
| Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
Warning: Undefined variable $user_ID in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/comments.php on line 83
You must belogged in to post a comment.