English
(English) IT-DIN-75S
(English)
75 Watts Single Output Industrial DIN Rail Power Supply
- Universal AC input range(90~264Vac)
- High efficiency up to 88%
- Built-in current limiting circuit
- Output protections: OVP/OLP/SCP/OTP
- Wide operating ambient temp (-20℃~70℃)
- Can be installed on TS-35/7.5 or TS-35/15
- 100% full load burn-in test
- Suitable for critical applications
- Ultra-slim,45mm width
- 2 years warranty
- Description
- Specifiche Tecniche
- Diagrammi a Blocchi
- Grafici e Curve
- Disegni Meccanici
- Documenti / Download
- Contattaci / Richieste
Description
75 Watts Single Output Industrial DIN Rail Power Supply
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
(English)
TECHNICAL SPECIFICATIONS
| MODEL | IT-DIN-75S-24 | ||
|---|---|---|---|
| OUTPUT | DC Output | 24V | |
| Rated Current | 3.2A | ||
| Current Range Note 1 | 0~3.2A | ||
| Ripple and Noise | 0~70℃ | ≤120mV | |
| Note 2 | .-20℃ | ≤240mV | |
| Voltage ADJ. Range | 24~28V | ||
| Voltage Accuracy | ±1.0% | ||
| Line Regulation | ±0.5% | ||
| Load Regulation | ±1.0% | ||
| Set-up Time | <1.2S@230Vac; <2.5mS@115Vac | ||
| Hold up Time | ≥10mS@115Vac; ≥20mS@230Vac Full load | ||
| Temperature Coefficient | ±0.03%/℃ | ||
| Overshoot and Undershoot | <5.0% | ||
| INPUT | Voltage Range | 90Vac~264Vac | |
| Frequency Range | 47Hz~63Hz | ||
| Efficiency ( Typical) | 0.88 | ||
| AC Current (max.) | <1.4A/115VAC; <0.7A/230VAC | ||
| Inrush Current (Typical) | 20A/115Vac ; 35A/230Vac Cold start | ||
| Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA | ||
| Over Load | 110%~150% of rated current, constant current | ||
| PROTECTION | Over voltage | 29~33V, shut down, re-power on. | |
| Over temperature | 100±5℃, detect on heat sink of power transistor; shut down O/P, re-power on. | ||
| Short Circuit | Long-term mode, auto recovery | ||
| Operating amb. Temp. & Hum. | .-20℃~70℃; 20%~90%RH No condensing | ||
| ENVIRONMENT | Storage Temp. & Hum. | .-40℃~85℃; 5%~95%RH No condensing | |
| Safety Standards | meet UL508, UL60950, EN60950 | ||
| SAFETY &EMC | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA. Primary-PG:2KVac; ≤10mA. Secondary-PG:0.5KVac≤10mA. | |
| Note 3 | Isolation Resistance | ≥100M ohms | |
| EMC Emission | Compliance to EN55022, EN55024, FCC PART 15 Class B (according to POWERLD test condition) | ||
| Harmonic Current | Compliance to EN61000-3-2, CLASS A | ||
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level | ||
| MTBF (MIL-HDBK-217F) | More than 500,000Hrs (25℃, Full load) | ||
| Dimension (W*H*D) | 45*124*119mm | ||
| OTHERS | Packing | 24pcs/CTN, 15.0Kg, 0.04cbm | |
| Cooling method | Cooling by free air convection | ||
| NOTE | 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature. | ||
| 2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. |
Warning: Undefined variable $user_ID in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/comments.php on line 83
You must belogged in to post a comment.