(English) IT-DIN-30S Series

(English)

30 Watts Single Output Industrial DIN Rail Power Supply Series

  • niversal AC input range(90~264Vac)
  • High efficiency, long life and high reliability
  • Output protections: OVP/OLP/SCP
  • Wide operating ambient temp (-25℃~70℃)
  • Can be installed on TS-35/7.5 or 35/15
  • 100% full load burn-in test
  • PCB with conformal coating
  • Suitable for critical applications
  • Cooling by free air convection
  • 3 years warranty

DESCRIZIONE PRODOTTO

Ci spiace, ma questo articolo è disponibile soltanto in Inglese Americano. Per ragioni di convenienza del visitatore, il contenuto è mostrato sotto nella lingua alternativa. Puoi cliccare sul link per cambiare la lingua attiva.

30 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

 

(English)

TECHNICAL SPECIFICATIONS

MODELIT-DIN-30S-12IT-DIN-30S-24
DC Output12V24V
Rated Current2.5A1.25A
Current Range Note 10~2.5A0~1.25A
Ripple and Noise Note 210~50℃≤50mV≤70mV
.-25~10℃≤100mV≤140mV
Voltage ADJ. Range12~14V24~28V
Voltage Accuracy±1.0%
Line Regulation±0.5%
OUTPUTLoad Regulation±1%
Set-up Time<1.5S @230Vac Full load
Hold up Time≥20mS @230Vac Full load
Temperature Coefficient±0.03%/℃
Overshoot and Undershoot<5.0%
Voltage Range90Vac~264Vac, 127VDC-370VDC (input V+ connect L, input V- connect N)
Frequency Range47Hz~63Hz
Efficiency ( Typical)82% @230Vac input, full load85% @230Vac input, full load
INPUTAC Current (max.)<0.8A
Inrush Current (Typical)50A/230Vac Cold start
Leakage CurrentInput—output: ≤0.25mA Input—PE: ≤3.5mA (264Vac input, 63Hz)
Over Load3~4.0A, hiccup mode, auto recovery1.5~2.5A, hiccup mode, auto recovery
Over voltage15.0~16.8V, Constant voltage, auto recovery28.8~31.2V, Constant voltage, auto recovery
PROTECTIONShort CircuitLong-term mode, auto recovery
Operating amb. Temp. & Hum.
.-25℃~70℃; 20%~90%RH No condensing
ENVIRONMENTStorage Temp. & Hum..-40℃~85℃; 5%~95%RH No condensing
Safety StandardsUL60950, EN60950
Withstand VoltagePrimary-Secondary: 3KVac/10mA; Primary-PE: 1.5KVac/10mA; Secondary-
Isolation Resistance>10M ohms
SAFETY &EMCEMC EmissionCompliance to EN55022, EN55024 Class B
Note 3Harmonic CurrentCompliance to EN61000-3-2 , CLASS A
EMC ImmunityCompliance to EN61000-4-2,3,4,5,6,11; heavy industry level
MTBF (MIL-HDBK-217F)590,000Hrs (25℃, Full load)
Dimension (L*W*H)103.7*32*97.5mm
OTHERSPacking36pcs/CTN
Cooling methodCooling by free air convection
1. All parameters NOT specially mentioned are measured at rated input, rated load and 25 ℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
NOTE
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series
(English) IT-DIN-30S Series

Datasheet Prodotto

Intellisystem Technologies