(English) IT-DIN-240S Series

(English)

240 Watts Single Output Industrial DIN Rail Power Supply Series

Universal AC input range(90~264Vac)
Built-in active PFC,PF>0.94
High efficiency up to 87%
Built-in current limiting circuit
Output protections: OVP/OLP/SCP/OTP
Wide operating ambient temp (-20℃~70℃)
Can be installed on TS-35/7.5 or TS-35/15
100% full load burn-in test
PCB soldering side with conformal coating
Suitable for critical applications
Altitude up to 6000m
Ultra-slim,70mm width
Cooling by free air convection
2 years warranty

Categorie: Alimentatori Industriali, Barra DIN, Prodotti Tag: 10~70℃, 10A, 24~28V, 240 Watts, 24V, 47Hz~63Hz, 48~56V, 48V, 5A, 70*124*127mm, Guida DIN, Single Output

Descrizione

Ci spiace, ma questo articolo è disponibile soltanto in English.

240 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

(English)

TECHNICAL SPECIFICATIONS

MODEL			IT-DIN-240S-24	IT-DIN-240S-48
OUTPUT	DC Output		24V	48V
	Rated Current		10A	5A
	Current Range Note 1		0~10A	0~5A
	Ripple and Noise	0~70℃	≤120mV	≤240mV
	Note 2	.-20℃	≤240mV	≤480mV
	Voltage ADJ. Range		24~28V	48~56V
	Voltage Accuracy		±1.0%
	Line Regulation		±0.5%
	Load Regulation		±1.0%
	Set-up Time		<2S@230Vac
	Hold up Time		≥20mS@230Vac Full load
	Temperature Coefficient		±0.03%/℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		90Vac~264Vac, 127Vdc-370Vdc
	Frequency Range		47Hz~63Hz
	Efficiency ( Typical) @ 230Vac		0.87	0.88
	AC Current (max.)		<3A/115Vac ; <2.5 A/230Vac	<3.5A /115Vac; <2.5A /230Vac
	Inrush Current (Typical)		<30A/115Vac; <60A/230Vac Cold start
	Power Factor		0.98/110VAC, 0.94/230VAC
	Leakage Current		Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz)
PROTECTION	Over Load		10.3~11.5A	5.5~6.5A
			Protection type: Constant current
	Over voltage		28~35V	58~63V
			Protection type: Shut down, auto recovery
	Over temperature		100±5℃, detect on heat sink of power transistor; shut down O/P, auto recovery after fault condition removed.
	Short Circuit		Long-term mode, auto recovery
	Operating amb. Temp. & Hum.		.-20℃~70℃; 20%~90%RH No condensing (pls refer to derating curve)
ENVIRONMENT	Storage Temp. & Hum.		.-40℃~85℃; 5%~95%RH No condensing
	Safety Standards		UL508, UL60950, EN60950
SAFETY &EMC	Withstand Voltage		Primary-Secondary: 3.0KVac/10mA .Primary-PG: 1.5KVac/10mA. Secondary-PG: 0.5KVdc/10mA.
	Isolation Resistance		100M ohms
	EMC Emission		Compliance to EN55022, EN55024 CLASS B
	Harmonic Current		Compliance to EN61000-3-2, CLASS A
	EMC Immunity		Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level
	MTBF (MIL-HDBK-217F)
OTHERS	Dimension (LWH)		70124127mm
	Packing		10pcs/CTN, 11.5Kgs,0.04cbm
	Cooling method		Cooling by free air convection

NOTE	1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
	2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.