IT-ES500-PU-4-POE
5 Ports PoE Switch.
IT-ES500-PU-4-POE is 4 ports 100Mbps PoE switch, auto detection and identification IEEE802.3af standard PD device, then carry power to it. Therefore do not worry it will destroy the private standard PoE or Non-PoE equipment.
IT-ES500-PU-4-POE is the best choice for minitype commercial network because it economically use PoE deployment wireless AP and IP camera . PS504 can resolve the problem of maintenance tedious, wireless coverage, terminal device powered, surveillance project. Maximum save the cost.
Description
Features
- Support power over ethernet cable device for example wireless AP and IP Camera;
- Support IEEE802.3af standard;
- Data and power transmission distance 100m, it can be flexible installation for wireless AP and surveillance project;
- Support upward port auto MDI/MDIX;
- Adopted storage forward switch system;
- Intelligentize power and minimum consumption, guarantee PD requirement;
- With power supply circuit protection function and protection back-end device safety;
- Automatically provide the adaptive device;
- Fanless design realize saving energe and environment protection;
- No noise design can reduce the affect for environment;
- Compact size design;
- Support loop circuit detection;
- Support saving power function when port unconnection.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
Network Ports
4 10/100Mbps PoE RJ45 port(port 1~port 4) 1 10/100Mbps Non-POE RJ45 port(port 5)
100Mbps full Duplex,10 or 100Mbps Half Duplex Network interface: 10BASE-T or 100BASE-TX Ethernet RJ-45 port
Performance
Bandwidth: 1.0Gbps (no block) network delay (100 to 100M bps): maximum 20 μs (using 64 byte packet) MAC address capacity:1K Frames filter and transmission rate: 10M port maximum 14,800pps 100M port maximum 148,800pps
Network protocols and standards
IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control IEEE 802.3af/at Power over Ethernet
POE pin
1/2(+),3/6(-) or customized 4/5(+),7/8(-)
LEDs indicator
Power LINK/ACT, PoE
Power
Total power: 60W (All PoE port,port 1~port 4) single port max 15.4W Output power: 60W; 48V @ 1.25A DC output power; (Each country use customized power plug)
Dimensions
Size(LxWxH): 92mm x 82mm x 22mm Weight:0.7 kg
Environment
Operating Temperature: 0°~45°C(32°~113°F)
Storage Temperature: -20℃~90℃(-4°~194°F)
Working Humidity: 10%~90% (Non-condensing)
Storage Temperature: 5%~90% (Non-condensing)
EMC
CE Class B FCC Part 15,Class B VCCI Class B C-Tick
Certifications
CE/LVD
Warranty
1 year
You must belogged in to post a comment.