Italiano
IT-ES200-PU-4-POE
4 + 1 Internal Power PoE Switch.
IT-ES200-PU-4-POE, 4+1 Ports 100Mbps internal power adapter PoE Switch, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This unmanaged switch offers four 100Mbps PoE ports which supply 15.4 watts of power single port for devices such as high power wireless access points, and VoIP telephony systems.
This rack mountable switch features an internal power supply. Auto sensing technology delivers 15.4 watts to 802.3af PoE devices. It reduces energy consumption by up to 75% when the switch is not in use. Boost office efficiency and reduce network congestion with a total switching capacity of 1 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case.
Description
Features
- IEEE 802.3af Power over Ethernet PoE compliant;
- Supports 10/100Mbps fast Ethernet;
- 4 x 100Mbit Auto-MDIX PoE ports;
- 60W Internal power supply;
- Provides up to 15.4 watts for PoE;
- Automatically detects the PoE class level of a Powered Device;
- 1Gbps bandwidth;
- Forwarding rate: 100 Mbps / 148,800 pps; 10 Mbps/14,880 pps;
- Status LEDs: System Power, PoE, 100 Mbps, and Link/Activity;
- Full wire-speed non-blocking reception and transmission;
- Store-and-forward switching method;
- Back pressure Flow Control for Half-Duplex mode;
- IEEE 802.3x Flow Control for Full-Duplex mode;
- Power saving technology powers down unused ports and when a connected device is in standby mode;
- Plug and Play;
- Sturdy rack mountable metal case;
- Easy installation and use, no need to convert by software and network protocol.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
Standards
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3x Flow Control
4x100Mbit Auto-MDIX PoE / PoE+ RJ-45 ports Port 1 is non POE, Port 2~port 5 are POE
Data Transfer Rate
Ethernet: 10/100 Mbps (Half/Full Duplex)
Forwarding Rate
100 Mbps/148,800 pps, 10 Mbps/14,880 pps
Switch capacity
1Gbps
Power
Input 100-240 V, 50/60 Hz
LED indicators
Power, PoE, Link/Activity
Power Consumption
Min: 8 Watts (standby) PoE Max: 48 Watts
Temperature
Operating: 0° ~ 40°C (32° ~ 113°F)
Storage: -20° ~ 90°C (-4° ~ 194°F)
Humidity
Max 90% (non-condensing)
Dimensions
140 x 91 x 28 mm
Weight
0.9 kg
Certifications
CE, FCC ROHS
PoE
Power over Ethernet
Up to 15.4 watts for PoE PoE: pin 3,6 for power- and pin 1,2 for power+
RSS - Posts
You must belogged in to post a comment.