IT-EMC-35S Series
35 Watts Single Output Series
- No Load power consumption<0.5W
- Universal AC input range
- Miniature size, high power density, high efficiency, long life and high reliability
- Withstand 300VA surge input for 5 sec.
- Output protections: OLP/OPP/SCP
- Wide operating ambient temp (-20℃~70℃)
- Operating altitude up to 5000M
- All using 105℃ long life electrolytic capacitors.
- 100% full load burn-in test
- Easy assembling from top side
- PCB soldering side with conformal coating
- Suitable for critical applications
- 3 years warranty
Condividi su:
- Click to share on LinkedIn (Opens in new window)
- Click to share on Facebook (Opens in new window)
- Click to share on Pinterest (Opens in new window)
- Click to share on Twitter (Opens in new window)
- Click to share on WhatsApp (Opens in new window)
- Click to share on Reddit (Opens in new window)
- Click to share on Tumblr (Opens in new window)
- Click to share on Telegram (Opens in new window)
- Click to share on Pocket (Opens in new window)
- Click to email a link to a friend (Opens in new window)
- Click to print (Opens in new window)
- Description
- Technical Specifications
- Block Diagrams
- Graphs & Curves
- Mechanical Drawings
- Download / Documentation
- Contact US / Requests
Description
35 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
MODEL | IT-EMC-35S-5 | IT-EMC-35S-12 | IT-EMC-35S-15 | ||
---|---|---|---|---|---|
OUTPUT | DC Output | 5V | 12V | 15V | |
Rated Current | 6A | 3A | 2.4A | ||
Current Range | 0~6A | 0~3A | 0~2.4A | ||
Ripple and Noise Note 2 | 0~70℃ | <50mV | <80mV | <120mV | |
.-25~0℃ | <80mV | <180mV | <200mV | ||
Voltage ADJ. Range | -5%~+10% of rated output voltage | ||||
Voltage Accuracy | ±3.0% | ±3.0% | ±3.0% | ||
Line Regulation | ±0.5% | ±0.5% | ±0.5% | ||
Load Regulation | ±1.0% | ±1.0% | ±1.0% | ||
Set-up Time | < 1S (230Vac input, Full load); | ||||
Hold up Time | > 20mS (230Vac input, Full load); > 10mS (120Vac input, Full load) | ||||
Temperature Coefficient | ±0.03%/℃ | ||||
Overshoot and Undershoot | <5.0% | ||||
INPUT | Voltage Range | 90Vac~264Vac , 127~370Vdc | |||
Frequency Range | 47Hz~63Hz | ||||
Efficiency | 115Vac input | 0.79 | 0.83 | 0.85 | |
( Typical) | 230Vac input | 0.8 | 0.84 | 0.86 | |
AC Current (max.) | <1A(max) | ||||
Inrush Current (Typical) | <50A@230Vac Cold start | ||||
Leakage Current | Input—output:<3.5mA Input—PG:<0.25mA | ||||
PROTECTION | Over Load | 105%~150% of rated output current, constant power,auto recovery | |||
Over Voltage | 105%~150% of rated output voltage, Constant Voltage | ||||
Short Circuit | Long-term mode, auto recovery | ||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | |||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | ||||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed); EN60950-1:2006 | |||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA. Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤ 10mA. | |||
Isolation Resistance | ≥100M ohms | ||||
EMC Emission | Compliance to EN55022, EN55024 ClassB | ||||
Harmonic Current | Compliance to EN61000-3-2,-3 | ||||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, EN61000-6-2 heavy industry level | ||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | |||
Dimension (L*W*H) | 101.6×63.5×33mm | ||||
Packing | 60PCS/CTN, 15.18KGS, 0.06CBM | ||||
Cooling method | Cooling by free air convection |
MODEL | IT-EMC-35S-24 | IT-EMC-35S-48 | ||
---|---|---|---|---|
OUTPUT | DC Output | 24V | 48V | |
Rated Current | 1.5A | 0.76A | ||
Current Range | 0~1.5A | 0~0.76A | ||
Ripple and Noise Note 2 | 0~70℃ | <120mV | <180 mV | |
.-25~0℃ | <200mV | <240mV | ||
Voltage ADJ. Range | -5%~+10% of rated output voltage | |||
Voltage Accuracy | ±3.0% | ±3.0% | ||
Line Regulation | ±0.5% | ±0.5% | ||
Load Regulation | ±1.0% | ±1.0% | ||
Set-up Time | < 1S (230Vac input, Full load); | |||
Hold up Time | > 20mS (230Vac input, Full load); > 10mS (120Vac input, Full load) | |||
Temperature Coefficient | ±0.03%/℃ | |||
Overshoot and Undershoot | <5.0% | |||
INPUT | Voltage Range | 90Vac~264Vac , 127~370Vdc | ||
Frequency Range | 47Hz~63Hz | |||
Efficiency | 115Vac input | 0.86 | 0.87 | |
( Typical) | 230Vac input | 0.87 | 0.88 | |
AC Current (max.) | <1A(max) | |||
Inrush Current (Typical) | <50A@230Vac Cold start | |||
Leakage Current | Input—output:<3.5mA Input—PG:<0.25mA | |||
PROTECTION | Over Load | 105%~150% of rated output current, constant power,auto recovery | ||
Over Voltage | 105%~150% of rated output voltage, Constant Voltage | |||
Short Circuit | Long-term mode, auto recovery | |||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | ||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed); EN60950-1:2006 | ||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA. Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤ 10mA. | ||
Isolation Resistance | ≥100M ohms | |||
EMC Emission | Compliance to EN55022, EN55024 ClassB | |||
Harmonic Current | Compliance to EN61000-3-2,-3 | |||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, EN61000-6-2 heavy industry level | |||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||
Dimension (L*W*H) | 101.6×63.5×33mm | |||
Packing | 60PCS/CTN, 15.18KGS, 0.06CBM | |||
Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
Product Datasheet
Related products
-
IT-IPS-618-IM-4-POE
4-ports 10/100Base-T(x) (POE) + 4-ports 10/100Base-T(x).
IT-IPS-618-IM-4-POE is an industrial grade, managed and redundancy Ethernet switch. The switch provides 8 ports 10/100M Ethernet and 4 ports 10/100M Ethernet PoE, which 4 ports Ethernet supports POE function (IEEE 802.3af/at). It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring and fault alarm. SW-Ring™ can bring your Ethernet to intelligent redundancy. The -40~75℃ working temperature, can meet all kinds of Industrial environment requirement and provide the solution of the economy.
-
ThermalTronix TT1640S-TID-A
Thermal Inspection DRONE – UAV – AS Infrared Imaging System. This series of UAV is foldable, easy to carry and to be put into backpack with a foldable frame and convenient to close or open etc. it features with greater load capacity, longer air staying time, perfect power configuration.
- FPV: First-Person View with high resolution analogue video transmittering to an RC aircraft, Ground detail can be seen even facing late afternoon sun
- IOSD: Highly involved and safe flight experience through collecting and trasmitting real-time flight data which is overlaid with video such as power voltage, flight velocity, height, flight attitude and GPS number, etc, and it supports Double Video Source Input (PAL and NTSC)
- Real-time monitoring & recording under different circumstances of light
- Excellent protection design for flight safety
- Optional data radio & digital image system enables BVR flight and image transmission at radius of 5 miles
- PTZ augmentation function (pitch/roll axis) efficiently eliminates video jitters
Product Features
- Advanced Stabilization Controller
- 9 Multi-Rotor Configurations & Customized Motor Mixer
- Intelligent Orientation Control (IOC)
- Point of Interest (POI)
- Intelligent Landing Gear
- Auto Return-to-Home
- “Banked Turn” Mode
- Cruise Control
-
IT-DIN-360 Series
360 Watts Single Output Industrial DIN Rail Power Supply Series
- Universal AC input range(85~264Vac)
- Support 1+1 or N+1 redundant system(suggest to use redundancy modules.)
- Built-in active PFC,PF>0.95
- High efficiency up to 93%
- Built-in current sharing function
- Built-in current limiting circuit
- Output protections: OVP/OLP/SCP/OTP
- Wide operating ambient temp (-25℃~70℃)
- 150% peak load capacity
- Excellent Partial Load Efficiency
- Built-in DC OK relay contact
- Can be installed on TS-35/7.5 or TS-35/15
- 100% full load burn-in test
- Suitable for critical applications
- Ultra-slim, 50mm width
- Free air convection
- 3 years warranty
-
IT-DIN-480 Series
480 Watts Single Output Industrial DIN Rail Power Supply Series
- Universal AC input range(85~264Vac)
- Support 1+1 or N+1 redundant system(suggest to use redundancy modules.)
- Built-in active PFC,PF>0.95
- High efficiency up to 91%
- Built-in current sharing function
- Built-in current limiting circuit
- Output protections: OVP/OLP/SCP/OTP
- Wide operating ambient temp (-25℃~70℃)
- 150% peak load capacity
- Easy Fuse Tripping due to High Overload Current
- Excellent Partial Load Efficiency
- Built-in DC OK relay contact
- Can be installed on TS-35/7.5 or TS-35/15
- 100% full load burn-in test
- Suitable for critical applications
- Ultra-slim,32mm width
- 3 years warranty
You must belogged in to post a comment.