IT-EMC-25S Series
25 Watts Single Output Series
- No Load power consumption<0.5W
- Universal AC input range
- Miniature size, high power density, high efficiency, long life and high reliability
- Withstand 300VA surge input for 5 sec.
- Output protections: OLP/OPP/SCP
- Wide operating ambient temp (-20℃~70℃)
- All using 105℃ long life electrolytic capacitors.
- 100% full load burn-in test
- PCB soldering side with conformal coating
- Suitable for critical applications
- 3 years warranty
Condividi su:
- Click to share on LinkedIn (Opens in new window)
- Click to share on Facebook (Opens in new window)
- Click to share on Pinterest (Opens in new window)
- Click to share on Twitter (Opens in new window)
- Click to share on WhatsApp (Opens in new window)
- Click to share on Reddit (Opens in new window)
- Click to share on Tumblr (Opens in new window)
- Click to share on Telegram (Opens in new window)
- Click to share on Pocket (Opens in new window)
- Click to email a link to a friend (Opens in new window)
- Click to print (Opens in new window)
- Description
- Technical Specifications
- Block Diagrams
- Graphs & Curves
- Mechanical Drawings
- Download / Documentation
- Contact US / Requests
Description
25 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
MODEL | IT-EMC-25S-S3.3 | IT-EMC-25S-S5 | ||||
---|---|---|---|---|---|---|
OUTPUT | DC Output | 3.3V | 5V | |||
Rated Current | 6A | 5A | ||||
Current Range | 0~6A | 0~5A | ||||
Ripple and Noise | .-20~70℃ | <50mV | <80mV | |||
Note 2 | ||||||
Voltage ADJ. Range | 3.1~3.5V | 4.75~5.25V | ||||
Voltage Accuracy | ±2.0% | |||||
Line Regulation | ±1% | |||||
Load Regulation | ±2.0% | |||||
Set-up Time | < 1.0S (115Vac input, Full load); < 2.0S (230Vac input, Full load) | |||||
Hold up Time | > 10mS(115Vac input, Full load); > 20mS(230Vac input, Full load) | |||||
Temperature Coefficient | ±0.03%/℃ | |||||
Overshoot and Undershoot | <5.0% | |||||
INPUT | Voltage Range | 88Vac~264Vac | ||||
Frequency Range | 47Hz~63Hz | |||||
Efficiency ( Typical) | 115Vac input | 0.7 | 0.75 | |||
230Vac input | 0.71 | 0.77 | ||||
AC Current (max.) | <0.7A | |||||
Inrush Current (Typical) | <20A@115Vac <40A@230Vac Cold start | |||||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA | |||||
PROTECTION | Over Load | 105%~150% of rated output current, constant power, auto recovery | ||||
Over Power | 105%~150% of rated output power, constant power, auto recovery | |||||
Short Circuit | Long-term mode, auto recovery | |||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-20℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | ||||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤ 10mA. | ||||
Isolation Resistance | 100M ohms | |||||
EMC Emission | Compliance to EN55022 CALSS B FCC PART15 B | |||||
EMC Immunity | Compliance to EN61000-4-2,4,5,8,11;EN55024,EN61000-6-2 heavy industry level | |||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||||
Dimension (L*W*H) | 79×51×28.8mm | |||||
Packing | 48PCS/CTN, 10.4KGS, 0.03CBM | |||||
Cooling method | Cooling by free air convection |
MODEL | IT-EMC-25S-S12 | IT-EMC-25S-S15 | IT-EMC-25S-S24 | ||||
---|---|---|---|---|---|---|---|
OUTPUT | DC Output | 12V | 15V | 24V | |||
Rated Current | 2.1A | 1.7 A | 1.1A | ||||
Current Range | 0~2.1A | 0~1.7A | 0~1.1A | ||||
Ripple and Noise | .-20~70℃ | <120mV | <150mV | <240mV | |||
Note 2 | |||||||
Voltage ADJ. Range | 11.4~12.6V | 14.25~15.75V | 22.8~25.2V | ||||
Voltage Accuracy | ±2.0% | ||||||
Line Regulation | ±1% | ||||||
Load Regulation | ±2.0% | ||||||
Set-up Time | < 1.0S (115Vac input, Full load); < 2.0S (230Vac input, Full load) | ||||||
Hold up Time | > 10mS(115Vac input, Full load); > 20mS(230Vac input, Full load) | ||||||
Temperature Coefficient | ±0.03%/℃ | ||||||
Overshoot and Undershoot | <5.0% | ||||||
INPUT | Voltage Range | 88Vac~264Vac | |||||
Frequency Range | 47Hz~63Hz | ||||||
Efficiency ( Typical) | 115Vac input | 0.8 | 0.81 | 0.83 | |||
230Vac input | 0.82 | 0.83 | 0.84 | ||||
AC Current (max.) | <0.7A | ||||||
Inrush Current (Typical) | <20A@115Vac <40A@230Vac Cold start | ||||||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA | ||||||
PROTECTION | Over Load | 105%~150% of rated output current, constant power, auto recovery | |||||
Over Power | 105%~150% of rated output power, constant power, auto recovery | ||||||
Short Circuit | Long-term mode, auto recovery | ||||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-20℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | |||||
Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | ||||||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | |||||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤ 10mA. | |||||
Isolation Resistance | 100M ohms | ||||||
EMC Emission | Compliance to EN55022 CALSS B FCC PART15 B | ||||||
EMC Immunity | Compliance to EN61000-4-2,4,5,8,11;EN55024,EN61000-6-2 heavy industry level | ||||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | |||||
Dimension (L*W*H) | 79×51×28.8mm | ||||||
Packing | 48PCS/CTN, 10.4KGS, 0.03CBM | ||||||
Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
Product Datasheet
Related products
-
IT-DIN-480 Series
480 Watts Single Output Industrial DIN Rail Power Supply Series
- Universal AC input range(85~264Vac)
- Support 1+1 or N+1 redundant system(suggest to use redundancy modules.)
- Built-in active PFC,PF>0.95
- High efficiency up to 91%
- Built-in current sharing function
- Built-in current limiting circuit
- Output protections: OVP/OLP/SCP/OTP
- Wide operating ambient temp (-25℃~70℃)
- 150% peak load capacity
- Easy Fuse Tripping due to High Overload Current
- Excellent Partial Load Efficiency
- Built-in DC OK relay contact
- Can be installed on TS-35/7.5 or TS-35/15
- 100% full load burn-in test
- Suitable for critical applications
- Ultra-slim,32mm width
- 3 years warranty
-
IT-SS200LM-IRL
- Highway monitoring system
- PTZ monitoring system
- Ports
- Forest Fire Prevention
- Infrared imaging
- Military application
-
IT-232D
IT-232D is a kind of RS-232 system communication extending product. This type of product auto sense serial rate transmission rate, no external power needed, optic electric isolation 2500V, be applicable in tough environment. Transmission distance at 9,600bps is 2,000m, stable performance. IT-232D has 2500 volts of isolation twice the rating of most isolators to protect RS-232 equipment from lightning strikes, accidental high voltage shorts and ground loops.
-
IT-IPS-618-IM-4-POE
4-ports 10/100Base-T(x) (POE) + 4-ports 10/100Base-T(x).
IT-IPS-618-IM-4-POE is an industrial grade, managed and redundancy Ethernet switch. The switch provides 8 ports 10/100M Ethernet and 4 ports 10/100M Ethernet PoE, which 4 ports Ethernet supports POE function (IEEE 802.3af/at). It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring and fault alarm. SW-Ring™ can bring your Ethernet to intelligent redundancy. The -40~75℃ working temperature, can meet all kinds of Industrial environment requirement and provide the solution of the economy.
You must belogged in to post a comment.