IT-DIN-75 Series

IT-DIN-75 Series

75 Watts Single Output Industrial DIN Rail Power Supply Series

  • Universal AC input range(85~264Vac)
  • Support 1+1 or N+1 redundant system(suggest to use redundancy modules.)
  • Built-in active PFC,PF>0.95
  • High efficiency up to 91%
  • Built-in current sharing function
  • Built-in current limiting circuit
  • Output protections: OVP/OLP/SCP/OTP
  • Wide operating ambient temp (-25℃~70℃)
  • 150% peak load capacity
  • Easy Fuse Tripping due to High Overload Current
  • Excellent Partial Load Efficiency
  • Built-in DC OK relay contact
  • Can be installed on TS-35/7.5 or TS-35/15
  • 100% full load burn-in test
  • Suitable for critical applications
  • Ultra-slim,32mm width
  • 3 years warranty

Description

75 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

 

TECHNICAL SPECIFICATIONS

MODELIT-DIN-75-12IT-DIN-75-24IT-DIN-75-48
OUTPUTDC Output12V24V48V
Rated Current6.3A 3.2A1.6A
Current Range Note 10~6.3A0~3.2A0~1.6A
Ripple and Noise 0~70℃≤100mV≤120mV≤120mV
Note 2.-25℃≤200mV≤240mV≤240mV
Voltage ADJ. Range12~14V24~28V48~56V
Voltage Accuracy ±1.0%
Line Regulation±0.5%
Load Regulation±1.0%
Set-up Time<250mS@230Vac ; <500mS@100Vac
Hold up Time ≥20mS(230Vac input, Full load)
Temperature Coefficient±0.03%/℃
Overshoot and Undershoot<5.0%
INPUTVoltage Range 85Vac~264Vac, 127Vdc-360Vdc
Frequency Range47Hz~63Hz
Power Factor (typical)0.99/100Vac 0.95/230Vac
Efficiency ( Typical)0.880.910.91
AC Current (max.)<0.95 A/100Vac <0.45A/230Vac
Inrush Current (Typical)< 30A/100Vac < 60A/230Vac Cold start
Leakage CurrentInput—output:<0.25mA Input—PG:<3.5mA
PROTECTIONOver Load110%~150% of rated current, Constant power limiting for some time(150% of rated current, last 3S) then PS stop working for 7S,after 7S,if the load <=rated current, PS will work normally, auto recovery
Over voltage15~18V29~33V58~65V
Protection type: Hiccup mode, Auto recovery
Over temperature100±5℃, detect on heat sink of power transistor; shut down O/P, auto recovery after temperature goes down.
Short CircuitLong-term mode, auto recovery
ENVIRONMENTOperating amb. Temp. & Hum..-25℃~70℃; 20%~90%RH No condensing
Storage Temp. & Hum..-40℃~85℃; 5%~95%RH No condensing
SAFETY &EMCSafety Standardsmeet UL508, UL60950, EN60950
Note 3Withstand VoltagePrimary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 2.5KVac; ≤10mA. Secondary-PG: 0.5KVac≤10mA.
Isolation Resistance≥100M ohms
EMC EmissionCompliance to EN55022, EN55024, FCC PART 15 Class B
Harmonic CurrentCompliance to EN61000-3-2, CLASS A
EMC ImmunityCompliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level
OTHERSMTBF (MIL-HDBK-217F)More than 300,000Hrs (25℃, Full load)
Dimension (L*W*H)124*119*32mm
Packing28pcs/CTN,21.2Kg, 0.04cbm
Cooling methodCooling by free air convection
Additional functionPower boost 150% of rated current
DC OKV On: when output voltage is up to 90% of rated output voltage
V Off: when output voltage is down to 80% of rated output voltage
DC OK relay contact ratingMax 30V/1A or 60V/0.3A or 30Vac/0.3A Resistive load
Parallel functionsupport
NOTE1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series
IT-DIN-75 Series

Product Datasheet

About the author:

Cristian is a brilliant intelligent and great proactivity person and an effective communicator and visionary. He has built a strong (and deserved) reputation as someone with vision, diligence and honor. Cristian is not a simple engineer but he is a real Scientist. His knowledge is not restricted to the area it covers, but its impressive passion for all the technical topics led him to acquire great skills even in areas far from his original studies. Cristian is able to address and solve complex technical problems with excellent results. He is a valuable writer with great scientific background formed with more that 15 years of active research on experimental Nuclear Physics performed in the most famous international research laboratories such as CERN, ESRN, INF. He write about HI-Tech solutions topics and advanced research study applied to industry. He have more than 150 scientific & technical publications. He is also a technical and famous writer in Italy due to his interviews released on the most famous Industrial Italian magazine.

You must belogged in to post a comment.

Intellisystem Technologies