IT-DIN-30S Series

IT-DIN-30S Series

30 Watts Single Output Industrial DIN Rail Power Supply Series

  • niversal AC input range(90~264Vac)
  • High efficiency, long life and high reliability
  • Output protections: OVP/OLP/SCP
  • Wide operating ambient temp (-25ā„ƒ~70ā„ƒ)
  • Can be installed on TS-35/7.5 or 35/15
  • 100% full load burn-in test
  • PCB with conformal coating
  • Suitable for critical applications
  • Cooling by free air convection
  • 3 years warranty

Description

30 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

 

TECHNICAL SPECIFICATIONS

MODELIT-DIN-30S-12IT-DIN-30S-24
DC Output12V24V
Rated Current2.5A1.25A
Current Range Note 10~2.5A0~1.25A
Ripple and Noise Note 210~50ā„ƒā‰¤50mVā‰¤70mV
.-25~10ā„ƒā‰¤100mVā‰¤140mV
Voltage ADJ. Range12~14V24~28V
Voltage AccuracyĀ±1.0%
Line RegulationĀ±0.5%
OUTPUTLoad RegulationĀ±1%
Set-up Time<1.5S @230Vac Full load
Hold up Timeā‰„20mS @230Vac Full load
Temperature CoefficientĀ±0.03%/ā„ƒ
Overshoot and Undershoot<5.0%
Voltage Range90Vac~264Vac, 127VDC-370VDC (input V+ connect L, input V- connect N)
Frequency Range47Hz~63Hz
Efficiency ( Typical)82% @230Vac input, full load85% @230Vac input, full load
INPUTAC Current (max.)<0.8A
Inrush Current (Typical)50A/230Vac Cold start
Leakage CurrentInputā€”output: ā‰¤0.25mA Inputā€”PE: ā‰¤3.5mA (264Vac input, 63Hz)
Over Load3~4.0A, hiccup mode, auto recovery1.5~2.5A, hiccup mode, auto recovery
Over voltage15.0~16.8V, Constant voltage, auto recovery28.8~31.2V, Constant voltage, auto recovery
PROTECTIONShort CircuitLong-term mode, auto recovery
Operating amb. Temp. & Hum.
.-25ā„ƒ~70ā„ƒ; 20%~90%RH No condensing
ENVIRONMENTStorage Temp. & Hum..-40ā„ƒ~85ā„ƒ; 5%~95%RH No condensing
Safety StandardsUL60950, EN60950
Withstand VoltagePrimary-Secondary: 3KVac/10mA; Primary-PE: 1.5KVac/10mA; Secondary-
Isolation Resistance>10M ohms
SAFETY &EMCEMC EmissionCompliance to EN55022, EN55024 Class B
Note 3Harmonic CurrentCompliance to EN61000-3-2 ļ¼Œ CLASS A
EMC ImmunityCompliance to EN61000-4-2,3,4,5,6,11; heavy industry level
MTBF (MIL-HDBK-217F)590,000Hrs (25ā„ƒ, Full load)
Dimension (L*W*H)103.7*32*97.5mm
OTHERSPacking36pcs/CTN
Cooling methodCooling by free air convection
1. All parameters NOT specially mentioned are measured at rated input, rated load and 25 ā„ƒ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12ā€ twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
NOTE
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series
IT-DIN-30S Series

Product Datasheet

About the author:

Cristian is a brilliant intelligent and great proactivity person and an effective communicator and visionary. He has built a strong (and deserved) reputation as someone with vision, diligence and honor. Cristian is not a simple engineer but he is a real Scientist. His knowledge is not restricted to the area it covers, but its impressive passion for all the technical topics led him to acquire great skills even in areas far from his original studies. Cristian is able to address and solve complex technical problems with excellent results. He is a valuable writer with great scientific background formed with more that 15 years of active research on experimental Nuclear Physics performed in the most famous international research laboratories such as CERN, ESRN, INF. He write about HI-Tech solutions topics and advanced research study applied to industry. He have more than 150 scientific & technical publications. He is also a technical and famous writer in Italy due to his interviews released on the most famous Industrial Italian magazine.

You must belogged in to post a comment.

Intellisystem Technologies