IT-SSG6POE-IR
With 6 high power LEDs for a total power consumption of 11W, beam angle 15° to 120°, beam distance 80m to 12m, the IT-SSG6POE-IR is an IR Illuminator with a high service of life.
- POE (Power over Ethernet) IEEE 802.3af powered.
- Wavelength 740nm/850nm/940nm.
- 50,000 hours lifetime LEDs.
- Extended working temperature range -30 to 50°C.
- 1-2 years warranty.
The IT-SSG6POE-IR is part of the high-power Vandal Resistant POE IR Illuminators series that is the top quality Infrared LED light source solution for night-time illumination, providing high-power infrared light for CCTV and IP cameras to enhance night-time visual performance.
- Description
- Technical Specifications
- Mechanical Drawings
- Sample Image
- Other Photos
- Optional Models
- Download / Documentation
- Contact US / Requests
Description
Product Features
- Precise secondary optical technology.
- The latest LED technology assures outstanding performance with excellent luminous efficiency and more uniform illumination.
- Independent innovation of high efficiency power drive schemes.
- Low failure rate of products is guaranteed by the professional in-house optimized independent circuit technology, which has been widely used in the illuminators for more than 5 years.
- Vandal resistant.
- Vandal resistant panel protects against hammer, stone and continuous thumping in a certain range.
- Energy saving technology.
- All illuminators has energy saving circuit with low electrical power consumption.
- Thinner and lighter design.
Basic Function
- To improve performance of the weak light camera and enhancing the picture effects at night;
- Conventional night monitoring;
- The function of video analysis at night;
- Reduce signal noise and other image distortion;
- Reduce the network bandwidth requirements;
- Energy saving by power factor correction;
- Reduce the equipment cost;
- Lower cost of installing and wiring.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
LED type: 6 pieces high power IR LEDs
Wavelength: 740nm/850nm/940nm
Beam angle: 15° to 120°
Beam distance: 80m to 12m
Bracket: Wall mount bracket
Working voltage: POE IEEE 802.3af
Power consumption: 11W
Day & Night switch: Automatic
Working temperature: -30 to 50°C
Protection level: IP66
Color: Beige/Black
Panel: Tempered glass panel with IR passing filter
Housing: Aluminum die-casting housing
Net weight: 1.2 kg
Gross weight: 1.5 kg
Dimensions: 181*131*72mm
Packing dimensions: 210*180*100mm
SAMPLE INFRARED ILLUMINATOR VIEWING PICTURE AT NIGHT
With IR light
Without IR light
MODELS FOR SELECTION
Model | Beam angle | Viewing IR distance |
---|---|---|
IT-SSG6POE-15-IR | 15° | 80m |
IT-SSG6POE-30-IR | 30° | 60m |
IT-SSG6POE-45-IR | 45° | 40m |
IT-SSG6POE-60-IR | 60° | 22m |
IT-SSG6POE-90-IR | 90° | 16m |
IT-SSG6POE-120-IR | 120° | 12m |
*Viewing IR distance is tested by Sony 1/3 CCD Camera and 850nm IR LEDs.
To achieve the distance needed, please pay attention to your camera specifications and lens before purchase. It is normal phenomenon that distance may vary due to different cameras and lens.
You must belogged in to post a comment.