IT-DIN-60S Series

30 Watts Single Output Industrial DIN Rail Power Supply Series

Universal AC input range(90~264Vac)
300Vac surge for 3 seconds
High efficiency, long life and high reliability
Output protections: OVP/OLP/SCP
Wide operating ambient temp (-25℃~50℃)
Can be installed on TS-35/7.5 or 35/15
100% full load burn-in test
PCB with conformal coating
Suitable for critical applications
Cooling by free air convection
3 years warranty

Categories: Industrial Power Supply, DIN Rails, Products Tags: 1.25A, 10~70℃, 103.7*32*97.5mm, 12~14V, 12V, 2.5A, 24~28V, 24V, 30 Watts, 47Hz~63Hz, 48V, 5A, DIN Rail, Single Output

Description

60 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

TECHNICAL SPECIFICATIONS

MODEL			IT-DIN-60S-12	IT-DIN-60S-24	IT-DIN-60S-48
OUTPUT	DC Output		12V	24V	48V
	Rated Current		5A	2.5A	1.25A
	Current Range Note 1		0~5A	0~2.5A	0~1.25A
	Ripple and Noise	10~50℃	≤60mV	≤50mV	≤120mV
	Note 2	.-25~10℃	≤120mV	≤100mV	≤240mV
	Voltage ADJ. Range		12~14V	24~28V	48~56V
	Voltage Accuracy		±1.0%
	Line Regulation		±0.5%
	Load Regulation		±1%
	Set-up Time		<1.5S @230Vac Full load
	Hold up Time		≥20mS @230Vac Full load
	Temperature Coefficient		±0.03%/℃
	Overshoot and undershoot		<5.0%
INPUT	Voltage Range		90Vac~264Vac, 127VDC-370VDC(input V+ connect L, input V- connect N)
	Frequency Range		47Hz~63Hz
	Efficiency ( Typical) @ 230Vac		0.86	0.88	0.89
	AC Current (max.)		<1.6A
	Inrush Current (Typical)		65A/230Vac Cold start	50A/230Vac Cold start	65A/230Vac Cold start
	Leakage Current		Input—output: ≤0.25mA Input—PE: ≤3.5mA
PROTECTION	Over Load		6~7.5A	3~4A	1.5~2.5A
			Hiccup mode, auto recovery	Hiccup mode, auto recovery	Hiccup mode, auto recovery
	Over voltage		15.4~18V	28.8~31.2V	58~63V
			Hiccup mode, auto recovery	Hiccup mode, auto recovery	Hiccup mode, auto recovery
	Short Circuit		Long-term mode, auto recovery
ENVIRONMENT	Operating amb. Temp. & Hum.		.-25℃~50℃; 20%~90%RH No condensing
	Storage Temp. & Hum.		.-40℃~85℃; 5%~95%RH No condensing
SAFETY &EMC	Safety Standards		UL60950, EN60950
Note 3	Withstand Voltage		Primary-Secondary: 3KVac/10mA; Primary-PE: 1.5KVac/10mA; Secondary-PE: 0.5KVac/10mA
	Isolation Resistance		>10M ohms
	EMC Emission		Compliance to EN55022, EN55024 Class B
	Harmonic Current		Compliance to EN61000-3-2 ， CLASS A
	EMC Immunity		Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level
OTHERS	MTBF (MIL-HDBK-217F)		590,000Hrs (25℃, Full load)
	Dimension (LWH)		103.73297.5mm
	Packing		36pcs/CTN
	Cooling method		Cooling by free air convection

NOTE	1. All parameters NOT specially mentioned are measured at rated input, rated load and 25 ℃ of ambient temperature.
	2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. .