(English) IT-485P5-TTL
(English)
The Intellisystem IT-485P5-TTL is a bi-directional port powered RS-485 to 5V TTL converter in a 9 pin format. It can convert any standard full duplex RS-485 port to a 5V TTL signal and vice versa. The unit is powered from the RS-485 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the TTL driver when data is present on the RS-485 side making the device plug-and-play, requiring no software drivers. The IT-485P5-TTL has a DB9 male connector on the RS485 side or 5-way terminal block and either a DB9 male connector or 5-way terminal block on the TTL side. Separate terminal block is included in package.
Descrizione
Features
- 5VDC external power is necessary
- Data Direction, auto-turnaround, no flow control is necessary
- Plug-and-Play (Device is hot-pluggable)
- Built-in surge protection, static protection and circuit protection
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
(English)
TECHNICAL SPECIFICATIONS
Technology
Standards: EIA RS-485 standard
RS-485 signal: D+, D-, GND
TTL signal: IN, OUT, GND
Baud rate: 300~115200bps
Transfer distance: 5V TTL side: 3m
RS-485 side: 1.2Km
Connectors: RS-485 Side: DB9 Male or 5 Way Terminal Block
5V TTL Side: DB9 Male or 5 Way Terminal Block
Port protect: 600W surge protection, 15KV ESD protection
Power
Power: 5V external power
Environment
Operating temperature: -10°C to 60°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95% (no condensation)
Appearance
Dimensions: 62.8mm×33.8mm×17.8mm
99.8mm×34.1mm×17.6mm (with terminal block)
Weight: 24g (with terminal block: 50g)
Certifications
CE, FCC, RoHS
5 years
Packing List
- IT-485P5-TTL ×1
- Separate terminal block (DB9F to 5 bit) ×2
- User manual ×1
You must belogged in to post a comment.