Plug-And-Play

Visualizzazione di 13 risultati

(English) IT-232I-25

(English)

Model IT-232I-25 is a kind of RS232 system communication serial port optic isolation product. This product support transmission rate as high as 921600bps, no external power needed, optic electric isolation 2.5KV, is applicable in tough environment. According to different customer need, separately corresponds to three-line serial port application with RTS/CTS (or DTR/CTS). Transmission distance at 9,600bps is 10m, stable performance.

- Leggi tutto
(English) IT-232I-9

(English)

Model IT-232I-25 is a kind of RS232 system communication serial port optic isolation product. This product support transmission rate as high as 921600bps, no external power needed, optic electric isolation 2.5KV, is applicable in tough environment. According to different customer need, separately corresponds to three-line serial port application with RTS/CTS (or DTR/CTS). Transmission distance at 9,600bps is 10m, stable performance.

- Leggi tutto
(English) IT-232P33-TTL

(English)

The Intellisystem IT-232P33-TTL is a bi-directional port powered RS-232 to 3.3V TTL converter in a 9 pin format. It can convert any standard full duplex RS-232C port to a 3.3V TTL signal and vice versa. The unit is powered from the RS-232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the TTL driver when data is present on the RS-232 side making the device plug-and-play, requiring no software drivers. The IT-232P33-TTL has a DB9 female connector on the RS-232 side and either a DB9 male connector or 5-way terminal block on the TTL side. Separate terminal block is included in package.

- Leggi tutto
(English) IT-232P5-TTL

(English)

The Intellisystem IT-232P5-TTL is a bi-directional port powered RS-232 to 5V TTL converter in a 9 pin format. It can convert any standard full duplex RS-232C port to a 5V TTL signal and vice versa. The unit is powered from the RS-232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the TTL driver when data is present on the RS-232 side making the device plug-and-play, requiring no software drivers. The IT-232P5-TTL has a DB9 female connector on the RS-232 side and either a DB9 male connector or 5-way terminal block on the TTL side. Separate terminal block is included in package.

- Leggi tutto
(English) IT-485P5-TTL

(English)

The Intellisystem IT-485P5-TTL is a bi-directional port powered RS-485 to 5V TTL converter in a 9 pin format. It can convert any standard full duplex RS-485 port to a 5V TTL signal and vice versa. The unit is powered from the RS-485 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the TTL driver when data is present on the RS-485 side making the device plug-and-play, requiring no software drivers. The IT-485P5-TTL has a DB9 male connector on the RS485 side or 5-way terminal block and either a DB9 male connector or 5-way terminal block on the TTL side. Separate terminal block is included in package.

- Leggi tutto
(English) IT-FL422-SP

(English)

IEC61643-21 is the recognized standards for top quality surge protectors, IT-FL422-SP have high respond speed, low output rudimental voltage, ascendance transfer performance. Interface using 4Pin crimping terminal, inhibition of lines on the high voltage pulse, protects the backend equipment to avoid damaged by lightning, industrial surge and electrostatic discharge overvoltage damage. This product uses metal shell, has good sealing property. It has the function of shielding and dust preventing corrosion. Products are connected in series, and installed in the front of the protected equipment.

- Leggi tutto
(English) IT-FL485-SP

(English)

IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, IT-FL485-SP have high respond speed, low output rudimental voltage, ascendance transfer performance. All have #10 ground screws which must be connected to a solid ground.

- Leggi tutto
(English) IT-SC485-TLC-25

(English)

Port-Powered RS232 to RS422 Converter

The IT-SC485-TLC-25 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.

- Leggi tutto
(English) IT-SC485-TLC-9

(English)

Port-Powered RS232 to RS485 Converter

The IT-SC485-TLC-9 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.

- Leggi tutto
(English) IT-SC485C-SW

(English)

Port-Power RS232 to RS485/422 Converter

The IT-SC485C-SW is an industrial grade bi-directional port-powered RS232 to RS485 or RS422 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port or four-wire balanced full duplex RS485 or RS422 port. In simple terms, it will convert any RS232 signal to a RS485 or RS422 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485/RS422 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The IT-SC485C-SW has a DB9 female connector on the RS232 side and either a DB9 male connector or 5 bit terminal block on the RS485/RS422 side.

- Leggi tutto
(English) IT-SC485P

(English)

Optical Isolation RS232 to RS485/422 Converter

IT-SC485P is a high performance, more function RS-232/485/422 interface converter. The product configure out connect power, optic-electrical isolation more than 2.5KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is an interface convert product that have good between performance to price. Adopt it self adapt interface technique, no use for setup switch.

- Leggi tutto
(English) IT-SC485WA-SW

(English)

Port-Powered RS232 to RS-485 Converter

The IT-SC485WA-SW is an industrial grade bi-directional port-powered 2500V opto-isolated RS232 to RS485 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The IT-SC485WA-SW has a DB9 female connector on the RS232 side and either a DB9 male connector or 3 bit terminal block on the RS485 side.

- Leggi tutto
IT-232D

(English)

IT-232D is a kind of RS-232 system communication extending product. This type of product auto sense serial rate transmission rate, no external power needed, optic electric isolation 2500V, be applicable in tough environment. Transmission distance at 9,600bps is 2,000m, stable performance. IT-232D has 2500 volts of isolation twice the rating of most isolators to protect RS-232 equipment from lightning strikes, accidental high voltage shorts and ground loops.

- Leggi tutto

T

Intellisystem Technologies

Intellisystem Technologies S.r.l. - © All Rights Reserverd 2003-2021