IT-ES100-PU-24-POE
24 Ports 10/100M Unmanaged PoE Switch.
The 24 Ports Unmanaged PoE Switch, with 24 100Mbit RJ45 ports, 2 Gigabit Copper/SFP Combo uplink Port, model IT-ES100-PU-24-POE, reduces equipment and installation costs by delivering data and power over existing Ethernet cables (CAT5 cable) to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 8.8Gbps.
LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with IT-ES100-PU-24-POE to install non-PoE devices in remote locations.
Description
Features
- 24 Ports 10/100Mbps + 2 Gigabit Copper /SFP Combo uplink Port unmanaged PoE Switch;
- 24 Ports supply power to PoE Powered Device;
- Complies with the IEEE 802.3af standard;
- If 12 POE port work only, then complies with IEEE 802.3at standard,25W each port;
- Each switch port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet);
- Support MAC address auto-learning and auto-aging;
- Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex);
- High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth;
- Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput;
- 8.8 Gbps Switching Capacity;
- On/Off power switch.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
Product Type
24 Ports Unamanaged PoE Switch
IT-ES100-PM-24-POE
Network protocols and standards
IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet
Power Specifications
Power consumption: maximum 390W PoE Power: 360W Voltage: 100 – 240 VAC, 50 -60 Hz
Network interfaces
24 10/100M ports (MDI / MDIX adaptive); ports with PoE features (24) 2 10/100/1000M Gigabit copper RJ45 ports (MDI / MDIX adaptive) 2 SFP GBIC fiber module slots
Physical Specifications
Dimensions: 440 x 290x 44 mm Weight: 5.5 kg
Electromagnetic radiation
CE mark, commercial FCC Part 15 Class A VCCI Class A C-Tick
Environmental norms
Operating Temperature: 0° – 50°C (32° – 104°F) Storage Temperature: -20° – 70°C (-4° – 158°F) Operating Humidity: Maximum relative humidity 90% without condensation Storage humidity: 95% maximum relative humidity, non-condensing Working height: up to 10,000 feet (3,000 meters) Storage altitude: the largest 10,000 feet (3,000 meters)
LEDS
Each device: power light Per port (10/100 and Gigabit): connection speed indicator Per PoE port: PoE power-on LED
Certifications
CE, FCC, RoHS
Performance Specifications
Forwarding modes: Store and forward Bandwidth: 8.8 Gbps (non-blocking) Network latency: 100 Mbps to 100 Mbps transmission, storage and forwarding mode under a 64-byte frame delay is less than 20 microseconds Buffer memory: 3Mb per system Addressing: 48-bit MAC address The address database size: 8,000 per system MAC address Mean failure interval (MTBF): 300,000 hours (about 34 years)
Warranty
1 year
Package Contents
24 Ports PoE Switch The power cord
You must belogged in to post a comment.