IT-ES100-PU-16-POE

16 Ports 10/100Mbps + 2 combo Ports Unmanaged PoE Switch

The 16 Ports Unmanaged PoE Switch, with 16 100Mbit RJ45 ports, 2 Gigabit SFP and 2 Gigabit Uplink, model IT-ES100-PU-16-POE, reduces equipment and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 7.2Gbps.

LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 25.5Watts to single PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with IT-ES100-PU-16-POE to install non-PoE devices in remote locations.

Description

Features

16 Ports 10/100Mbps + 2 Gigabit SFP ports +2 Gigabit Uplink unmanaged PoE Switch;
16 Ports support power to PoE Powered Device;
Complies with the IEEE 802.3af/at standard;
Each Switching port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet), 1000/2000Mbps (Gigabit Ethernet) supported;
Support MAC address auto-learning and auto-aging;
Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex);
High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth;
Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput;
7.2 Gbps Switching Capacity;
On/Off power switch;
Fanless design to make sure it works quietly without disturbing your family;
250W adapter power.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

TECHNICAL SPECIFICATIONS

Fast Ethernet Ports
16 10/100Base-TX RJ-45 Auto-MDI / MDI-X ports

Gigabit Ports
2 Gigabit SFP +2 Gigabit Uplink

Power over Ethernet ports
16 Ports with PoE injector function

Switch Processing Scheme
Store-and-Forward

Switch fabric
7.2 Gbps

Flow Control
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex

Dimensions
440 x 310 x 45 mm (1U height)

Weight
5.2kg

Power Requirement
100-240V AC, 50-60 Hz

Temperature
Operating: 0~50 ℃ Storage: -40~70 ℃

Humidity Operating
5% to 90%, Storage: 5% to 90% (Non-condensing)

Warranty
1 year

Performance Specifications
Forwarding modes: Store and forward Bandwidth: 8.8 Gbps (non-blocking) Network latency: 100 Mbps to 100 Mbps transmission, storage and forwarding mode under a 64-byte frame delay is less than 20 microseconds Buffer memory: 3Mb per system The address database size: 4K MAC address

Power over Ethernet

PoE Standard
IEEE 802.3af/at Power over Ethernet / PSE

PoE Power Supply Type
End-Span

PoE Power Output
Per Port 48V DC, 350mA. Max. 25.5Watts

Power Pin Assignment
1/2(+), 3/6(-)

Standards Conformance

Certifications
FCC , CE, ROHS

Standard Compliances
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet IEEE 802.3x Full-duplex Flow control IEEE 802.3af/at Power over Ethernet IEEE 802.1Q VLAN IEEE 802.1p QoS