IT-DIN-480 Series

480 Watts Single Output Industrial DIN Rail Power Supply Series

Universal AC input range(85~264Vac)
Support 1+1 or N+1 redundant system（suggest to use redundancy modules.）
Built-in active PFC,PF>0.95
High efficiency up to 91%
Built-in current sharing function
Built-in current limiting circuit
Output protections: OVP/OLP/SCP/OTP
Wide operating ambient temp (-25℃~70℃)
150% peak load capacity
Easy Fuse Tripping due to High Overload Current
Excellent Partial Load Efficiency
Built-in DC OK relay contact
Can be installed on TS-35/7.5 or TS-35/15
100% full load burn-in test
Suitable for critical applications
Ultra-slim,32mm width
3 years warranty

Categories: Industrial Power Supply, DIN Rails, Products Tags: 10~70℃, 10A, 130Vdc-350Vdc, 24V, 47Hz~63Hz, 480 Watts, 48V, 6A, 70*124*127mm, 85Vac~264Vac, DIN Rail, Single Output

Description

480 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

TECHNICAL SPECIFICATIONS

MODEL			IT-DIN-480-24	IT-DIN-480-48
OUTPUT	DC Output		24V	48V
			12V
	Rated Current		20A	10A
			6A
	Current Range Note 1		0~20A	0~10A
			0~6A
	Ripple and Noise	0~70℃	≤240mV	≤480mV
	Note 2	.-25℃	≤480mV	≤480mV
	Voltage ADJ. Range		24~28V	48~56V
	Voltage Accuracy		±3.0%
	Line Regulation		±0.5%
	Load Regulation		±1.0%
	Set-up Time		<3S@230Vac
	Hold up Time		≥20mS(230Vac input, Full load)
	Temperature Coefficient		±0.03%/ ℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		85Vac~264Vac, 130Vdc-350Vdc
	Frequency Range		47Hz~63Hz
	Power Factor (typical)		0.99/110Vac 0.95/230Vac
	Efficiency ( Typical)		93.8%	93.8%
			≥84%
				≥88%
	AC Current (max.)		<6.0 A/100Vac <3.0A/230Vac
	Inrush Current (Typical)		＜ 20A/110Vac ＜ 40A/230Vac Cold start
	Leakage Current		Input—output:<0.25mA Input—PG:<3.5mA
PROTECTION	Over Load		110%~150% of rated current, Constant current limiting for some time(150% of rated current, last 3S) then PS stop working for 7S,after 7S,if the load <=rated current, PS will work normally, auto recovery
	Over voltage		28.8~33V, constant voltage, Auto recovery	58~63V, constant voltage, Auto recovery
	Over temperature		115±5℃, detect on temperature controller; shut down O/P, auto recovery after temperature goes down.
	Short Circuit		Long-term mode, auto recovery
ENVIRONMENT	Operating amb. Temp. & Hum.		.-25℃~70℃; 20%~90%RH No condensing
	Storage Temp. & Hum.		.-40℃~85℃; 5%~95%RH No condensing
SAFETY &EMC	Safety Standards		meet UL508, UL60950, EN60950
	Withstand Voltage		Primary-Secondary: 3.0KVac/10mA .Primary-PG: 2.5KVac/10mA. Secondary-PG: 0.5KVac/20mA.
			Output-DC OK: 0.5KVac/1mA
	Isolation Resistance		10M ohms
	EMC Emission		Compliance to EN55022, EN55024, FCC PART 15 Class B
	Harmonic Current		Compliance to EN61000-3-2, CLASS A
	EMC Immunity		Compliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level
OTHERS	MTBF (MIL-HDBK-217F)		More than 300,000Hrs (25℃, Full load)
	Dimension (LWH)		70124127mm
	Packing		10pcs/CTN, 13Kgs/CTN, 0.04cbm
	Cooling method		Cooling by free air convection

dditional function	Power boost		150% of rated current
	Parallel function		support