Ref.

Model

Description

 

 

ITC1

Outdoor camera housing

 

ITCR1

 

Like ITC1, but for WaveVision radio cameras. Thanks to an SMA connector on the rear of the housing the WaveVision antenna system can be mounted out of the camera housing.

Technical Info Brackets

Camera housing wit an internal cooling ventilator and heater. If in direct sunlight, or in an area with a hot climate (southern Italy, coastal areas), this housing is advantageous as it automatically cools the camera when the temperature is too high. Then if the temperature falls below zero, for example in mountainous areas, the internal heater ensures it continues to function. The fan and heater are connected directly to a 230V power supply, and respond automatically to high or low temperatures. The heater also clears condensation and prevents the glass from misting. The upper lid is hinged to ensure easy access to the internal components and does not need to be screwed shut. The generous internal dimensions (107x80x245), mean that it will take not only the camera but also other devices such as power packs and wireless transmitters. ITST2 Bracket can be ordered separately. Color: white

Technical Info Brackets

ITC4

 

This housing is suitable for protecting cameras in indoor locations. Housings like ITC4 are suggested for use in dusty environments, or where the camera might be knocked or damaged. The ITC4 is the ideal solution for factories, warehouses, workshops, supermarkets, etc. The internal measurements (67x60x245) allow's to be used for any kind of camera. This model should be mounted on bracket ITST3, which can be ordered separately. Color: aluminum

Technical Info Brackets