Ref.

Model

Description

 

ENERGY BACKUP

Very compact and efficient battery pack that let's work for different hours any traditional camera or IP camera for emergency when the line power is loss. Thanks to it's compact design it is suitable to be integrated inside to each camera housing both indoor and outdoor. Power supply included.

Technical Specification

Video to Twisted Pair - Converters specifically realized in order to transmit video and audio signals on any type of twisted pair cable, the best alternative to classic coaxial cable. Cabling is thus cheaper, with less signal attenuation. The range includes passive versions, without a power supply, with a range of 600m, and active versions, with a power supply, which have a range of up to 2.4 km

Technical Specification

Power supply 220V-AC/12V-DC.

 

 

ITCT2

 

ITYG1

ITYG1 9db Directional Antenna for WaveVision Transmitters and Receivers - ITYG1 is a YAGI directional antenna that offers a gain of 9 dB. It can be used as a standard antenna replacement, on any WaveVision camera or receiver. The antenna can be aligned optically due to the very wide radiation field range, around 30° horizontally and vertically. The antenna is manufactured entirely in aluminum and includes a female N connector. The antenna comes complete with clamp for pole mounting and 1m connector cable for WaveVision receivers and transmitters. We offer longer cables but these should only be used if indispensable, as the longer the antenna cable is longer more the the signal loss will increase. Length: 450mm.

 

ITYG2

ITYG2 12db Directional Antenna for WaveVision Transmitters and Receivers - ITYG2 is a YAGI antenna as the ITYG1 one, but longer and with higher gain: 12 dB. Length: 750mm.

 

ITCA4 1m Cable for YAGI directional antenna ITYG1/2 - Low attenuation cable for connecting directional YAGI antenna to Intellisystem Technologies WaveVision transmitters and receivers. Complete with male SMA terminal (camera end) and male N connector (antenna end). Length 1 meter (supplied as standard with antennaITYG1/2).

ITCA5 5m Cable for YAGI directional antenna ITYG1/2 - Low attenuation cable for connecting directional YAGI antenna to Intellisystem Technologies WaveVision transmitters and receivers. Complete with male SMA terminal (camera end) and male N connector (antenna end). Length 1 meter (supplied as standard with antennaITYG1/2).

ITCA6 10m Cable for YAGI directional antenna ITYG1/2 - Low attenuation cable for connecting directional YAGI antenna to Intellisystem Technologies WaveVision transmitters and receivers. Complete with male SMA terminal (camera end) and male N connector (antenna end). Length 1 meter (supplied as standard with antennaITYG1/2).

ITCA1 30 cm Antenna extension cables. - When a WaveVision wireless camera transmitter has to be installed in a metal case for concealment or vandal-proofing, the antenna cannot be directly screwed onto the camera, as it would be shield by the metal case and would not transmit correctly. This 30 cm extension cable enables the antenna to be positioned outside the metal case without any transmission/receiving problems.

ITCA2 1m Antenna extension cables. - Like ITCA1 but with 1m cable length. The longer length of this cable ensure that the antenna can be positioned further away from the camera (for example, behind a wall). Is not suggested to purchase a 1m cable if a 30cm one is sufficient, because a longer cable has always much more signal loss. We does not produce longer cables, due to the modest gain of an omni directional antenna that would be excessively compromised.

ITCB1 Cable for special power supplies - Power cable for all 12VDC Intellisystem Technologies devices using a 12V burglar alarm battery. Burglar alarm batteries guarantee long duration and can be recharged using the specific charger. Fast On connectors. Length 1m.

 

ITCB2 Vehicle-based power cable - Power cable for all the Intellisystem Technologies 12VDC devices, to connect to car cigarette lighter. This type of power supply is the most practical for all vehicle-based surveillance applications. Length 1m.

ITBNCRCA1 BNC/RCA Adapter - BNC male/RCA female Adapter, 75 Ohm, for coaxial cable RG59. This adaptor connects an audio/video cable with RCA terminals (such as ITCT2, supplied with Intellisystem Technologies receivers and transmitters) to devices fitted with a BNC connector, such as monitors, quads, multiplexers, etc.

ITBNCRCA2 RCA/BNC Adapter- NC female/RCA male Adapter, 75 Ohm, for coaxial cable RG59. This adaptor is used to connect a cable with a BNC connector to a device with an RCA terminal. RCA terminals are commonly used for audio input (on cameras, monitors, etc.)

ITAD1 CCTV Warning Sticker - Monochrome window sticker in English This 120x80 mm sticker attaches to the inside of a window, such as a shop window or glass door, and is visible from the outside. Wording in English with explanatory drawing, warning of the presence of a CCTV system in operation.