(English) IT-DIN-240 Series

(English)

240 Watts Single Output Industrial DIN Rail Power Supply Series

  • Universal AC input range(85~264Vac)
  • Support 1+1 or N+1 redundant system(suggest to use redundancy modules.)
  • Built-in active PFC,PF>0.95
  • High efficiency up to 94%
  • Built-in current sharing function
  • Built-in current limiting circuit
  • Output protections: OVP/OLP/SCP/OTP
  • Wide operating ambient temp (-25℃~70℃)
  • 150%(360W) peak load capacity
  • Easy Fuse Tripping due to High Overload Current
  • Excellent Partial Load Efficiency
  • Built-in DC OK relay contact
  • Can be installed on TS-35/7.5 or TS-35/15
  • 100% full load burn-in test
  • Suitable for critical applications
  • Ultra-slim,45mm width
  • 3 years warranty

DESCRIZIONE PRODOTTO

Ci spiace, ma questo articolo è disponibile soltanto in Inglese Americano. Per ragioni di convenienza del visitatore, il contenuto è mostrato sotto nella lingua alternativa. Puoi cliccare sul link per cambiare la lingua attiva.

240 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

(English)

TECHNICAL SPECIFICATIONS

MODELIT-DIN-240-24IT-DIN-240-48
OUTPUTDC Output24V48V
12V
Rated Current10A5A
6A
Current Range Note 10~10A0~5A
0~6A
Ripple and Noise 0~70℃≤240mV≤480mV
Note 2.-25℃≤480mV≤480mV
Voltage ADJ. Range24~28V48~56V
Voltage Accuracy ±3.0%
Line Regulation±0.5%
Load Regulation±1.0%
Set-up Time<3S@230Vac
Hold up Time ≥20mS(230Vac input, Full load)
Temperature Coefficient±0.03%/ ℃
Overshoot and Undershoot<5.0%
INPUTVoltage Range 85Vac~264Vac, 127Vdc-375Vdc
Frequency Range47Hz~63Hz
Power Factor (typical)0.99/110Vac 0.95/230Vac
Efficiency ( Typical)0.940.93
≥84%≥88%
AC Current (max.)<3.0 A/100Vac <1.5A/230Vac
Inrush Current (Typical)< 20A/110Vac < 40A/230Vac Cold start
Leakage CurrentInput—output:<0.25mA Input—PG:<3.5mA
PROTECTIONOver Load110%~150% of rated current, Constant current limiting for some time(150% of rated current, last 3S) then PS stop working for 7S,after 7S,if the load <=rated current, PS will work normally, auto recovery
Over voltage29~33V, constant voltage, Auto recovery58~63V, constant voltage, Auto recovery
Over temperature105±5℃, detect on heat sink of power transistor; shut down O/P, auto recovery after temperature goes down.
Short CircuitLong-term mode, auto recovery
ENVIRONMENTOperating amb. Temp. & Hum..-25℃~70℃; 20%~90%RH No condensing
Storage Temp. & Hum..-40℃~85℃; 5%~95%RH No condensing
SAFETY &EMCSafety Standardsmeet UL508, UL60950, EN60950
Withstand VoltagePrimary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 2.5KVac; ≤10mA. Secondary-PG: 0.5KVac≤20mA.
Isolation Resistance≥100M ohms
EMC EmissionCompliance to EN55022, EN55024, FCC PART 15 Class B
Harmonic CurrentCompliance to EN61000-3-2, CLASS A
EMC ImmunityCompliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level
OTHERSMTBF (MIL-HDBK-217F)More than 300,000Hrs (25℃, Full load)
Dimension (L*W*H)45*124*119mm
Packing24pcs/CTN, 21Kgs/CTN, 0.045cbm
Cooling methodCooling by free air convection
Additional functionPower boost 150% of rated current
Parallel functionsupport
DC-OKV On: when output voltage is up to 90% of rated output voltage
V Off: when output voltage is down to 80% of rated output voltage
DC-OK relay contact ratingMax 30V/1A or 60V/0.3A or 30Vac/0.3A Resistive load
NOTE1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series
(English) IT-DIN-240 Series

Datasheet Prodotto

Intellisystem Technologies