DESCRIZIONE PRODOTTO
120 Watts Single Output Industrial DIN Rail Power Supply Series
(English)
120 Watts Single Output Industrial DIN Rail Power Supply Series
Ci spiace, ma questo articolo è disponibile soltanto in Inglese Americano. Per ragioni di convenienza del visitatore, il contenuto è mostrato sotto nella lingua alternativa. Puoi cliccare sul link per cambiare la lingua attiva.
120 Watts Single Output Industrial DIN Rail Power Supply Series
(English)
MODEL | IT-DIN-120-12 | IT-DIN-120-24 | IT-DIN-120-48 | ||
---|---|---|---|---|---|
OUTPUT | DC Output | 12V | 24V | 48V | |
Rated Current | 10A ( pls refer to derating curve ) | 5A | 2.5A | ||
Current Range Note 1 | 0~10A | 0~5A | 0~2.5 | ||
Ripple and Noise | 0~70℃ | ≤100mV | ≤120mV | ≤240mV | |
Note 2 | .-25℃ | ≤200mV | ≤240mV | ≤240mV | |
Voltage ADJ. Range | 12~14V | 24~28V | 48~56V | ||
Voltage Accuracy | ±1.0% | ||||
Line Regulation | ±0.5% | ||||
Load Regulation | ±1.0% | ||||
Set-up Time | <250mS@230Vac ; <500mS@100Vac | ||||
Hold up Time | ≥20mS(230Vac input, Full load) | ||||
Temperature Coefficient | ±0.03%/℃ | ||||
Overshoot and Undershoot | <5.0% | ||||
INPUT | Voltage Range | 85Vac~264Vac, 127Vdc-360Vdc | |||
Frequency Range | 47Hz~63Hz | ||||
Power Factor (typical) | 0.99/100Vac 0.95/230Vac | ||||
Efficiency ( Typical) | 89.5% | 0.91 | 0.92 | ||
AC Current (max.) | <1.5 A/100Vac <0.65A/230Vac | ||||
Inrush Current (Typical) | < 30A/100Vac < 60A/230Vac Cold start | ||||
Leakage Current | Input—output:<0.25mA Input—PG:<3.5mA | ||||
PROTECTION | Over Load | 110%~150% of rated current, Constant current limiting for some time(150% of rated current, last 3S) then PS stop working for 7S,after 7S,if the load <=rated current, PS will work normally, auto recovery | |||
Over voltage | 15~18V | 29~33V | 58~65V | ||
Protection type: Hiccup mode, Auto recovery | |||||
Over temperature | 100±5℃, detect on heat sink of power transistor; shut down O/P, auto recovery after temperature goes down. | ||||
Short Circuit | Long-term mode, auto recovery | ||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing | |||
Storage Temp. & Hum. | .-40℃~85℃; 5%~95%RH No condensing | ||||
SAFETY &EMC | Safety Standards | meet UL508, UL60950, EN60950 | |||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA .Primary-PG: 2.5KVac; ≤10mA. Secondary-PG: 0.5KVac≤10mA. | |||
Isolation Resistance | ≥100M ohms | ||||
EMC Emission | Compliance to EN55022, EN55024, FCC PART 15 Class B | ||||
Harmonic Current | Compliance to EN61000-3-2, CLASS A | ||||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level | ||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 300,000Hrs (25℃, Full load) | |||
Dimension (L*W*H) | 124*119*32mm | ||||
Packing | 28pcs/CTN,18.02Kgs, 0.04cbm | ||||
Cooling method | Cooling by free air convection | ||||
Additional function | Power boost | 150% of rated current | |||
DC OK | V On: when output voltage is up to 90% of rated output voltage | ||||
V Off: when output voltage is down to 80% of rated output voltage | |||||
DC OK relay contact rating | Max 30V/1A or 60V/0.3A or 30Vac/0.3A Resistive load | ||||
Parallel function | support | ||||
NOTE | 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature. | ||||
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. |
4-ports 10/100/1000M Base-T (x) PoE + 1-port Gigabit SFP slot.
The IT-IPS-205G-IU-GS-4-POE switch is a kind of unmanaged industrial Gigabit PoE switch, it support 4 10/100/1000Base-T(X) ports and 1 Gigabit SFP port. The 4 Gigabit Ethernet port G1~G4 support Power-over-Ethernet (PoE) function. The IT-IPS-205G-IU-GS-4-POE switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switches support IEEE802.3/ IEEE802.3u/ IEEE802.3x with 10/100/1000M, full/half-duplex, and MDI/MDI-X auto-sensing, providing reliable and economic solution for your industrial Ethernet network.
6 ports 10/100 Base-TX + 2 ports 100M fiber + 4 ports RS485/422 Managed Industrial Ethernet Switch.
The IT-ES618-IM-2F-4D(RS-485)-P(12/48VDC) is an industrial, management, redundant industrial Ethernet switch and integrate 4 ports RS485/422 serial device server, it support 6 ports 10/100M Ethernet (RJ45), 2 ports 100M fiber, 4 ports RS485/422, 2 redundant 12~48VDC power input and 1 relay alarm output, it adopt SW-Ring™ redundant technology (Recovery time<20ms), users can set the redundant easily to increase network reliability, furthermore, it can also support numerous intelligent network management functions, like as IGMP, RSTP, 802.1Q VLAN, QOS, port trunking and port mirroring, etc.
It adopted no fan, low power consumption design, IP40, corrugate high strength iron shell, the performance is more steadily. It accorded with CE, FCC standard and Industrial 4 class, DIN rail installation and wide operating temperature (-40~85°C), it can satisfied some kinds of industrial environment, it can provide reliable and quickly solution for your Ethernet device.
5 ports Industrial Managed Ethernet Switch with 2 ports RS485/422.
IT-ES605-IM-2D(RS-485) Industrial Ethernet switches integrated serial device server function, it adopt SW-Ring™ redundant technology (Recovery time <20ms), users can set the redundant easily to increase network reliability, furthermore, IT-ES605-IM-2D(RS-485) can support 2 ports RS485/422, AT command and alarm output. It adopted no fan, low power consumption design, IP30, corrugate high strength iron shell, the performance is more steadily.
It accorded with CE, FCC standard and Industrial 4 grades, DIN rail installation and wide operating temperature (-40~75°C), it can satisfied some kinds of industrial environment, it can provide reliable and quickly solution for your Ethernet device.
8 ports 10/100 Base-TX + 4 ports RS232 Managed Industrial Ethernet Switch.
IT-ES618-IM-4D(RS-232) is an industrial, management, redundant industrial Ethernet switch and integrates 4 port RS232 serial device server, support 8 ports 10/100M Ethernet (RJ45), 4 ports RS232, 2 redundant 12~48VDC power input and 1 relay alarm output. It adopt SW-Ring™ redundant technology (Recovery time<20ms), users can set the redundant easily to increase network reliability, furthermore, it can also support numerous intelligent network management functions, like as IGMP, RSTP, 802.1Q VLAN, QOS, port trunking and port mirroring, etc.
It adopted no fan, low power consumption design, IP40, corrugate high strength iron shell, the performance is more steadily. It accorded with CE, FCC standard and Industrial 4 class, DIN rail installation and wide operating temperature (-40~85°C), it can satisfied some kinds of industrial environment, it can provide reliable and quickly solution for your Ethernet device.