Menu
≡
╳
Menu
≡
╳
IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, IT-FL45M1000-SP made by the high response surge arresters, the advantage allow clamping voltage and low loss against high speed signal, because it had a low capacitance. Designed to protect data communication lines in local and wide area networks up to 1000Base-TX transmission speeds.
Technology
Standard: 10Base-T/100Base-TX/1000Base-TX standard
10/100/1000M signal: IEC6100-4-5 and ITU-TK20&21
Nominal discharge current(In):5 KA(8/20μS)
Working voltage: 0-5V
Limit voltage: ≤40V
Apply Band rate: 1000Mbps
Connector: RJ45 (F)
The line of protection: 4 lines (1, 2, 3, 6)
Insert consumption: ≤0.5dB
Delay time: ≤1ns
Working temperature:-20 to 60°C
Storage temperature:-25 to 85°C
Humidity: Relative humidity 5% to 95%
No power supply needed, No consumption
L×W×H: 72mm×42mm×25mm
Shell: Alnico
Color: Blue
Weight: 10g
Certifications
4-ports 10/100Base-T(x) (POE) + 2-ports 100Base-FX + 2-ports 10/100Base-T(x).
IT-IPS-618-IM-2F-4-POE is an industrial grade, managed and redundancy Ethernet switch. The switch provides 4 ports 10/100M Ethernet PoE, 4 ports 10/100M Ethernet and 2 ports fast Ethernet optical, which 4 ports Ethernet supports POE function (IEEE 802.3af/at). It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring and fault alarm. SW-Ring™ can bring your Ethernet to intelligent redundancy. The -40～75℃ working temperature, can meet all kinds of Industrial environment requirement and provide the solution of the economy.
4-ports 10/100Base-T(x) (POE) + 1-port Gigabit Combo.
IT-IPS-315-IM-1GC-4-POE is an industrial grade, unmanaged PoE switch. The switch provides 4 ports 10/100M Ethernet and 1 ports combo Gigabit SFP slots or 10/100/1000Base-T(X) ports, which 4 ports Ethernet supports POE function (IEEE8023af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x/ with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, the -40～75℃ working temperature, can meet all kinds of Industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.
86 Cube Vandal Proof Anti Echo Digital Pickup
Thermal Inspection DRONE – UAV – AS Infrared Imaging System. This series of UAV is foldable, easy to carry and to be put into backpack with a foldable frame and convenient to close or open etc. it features with greater load capacity, longer air staying time, perfect power configuration.
SideBarMenu
≡
╳
Intellisystem Technologies S.r.l. - © All Rights Reserverd 2003-2021
Italiano
RSS - Posts