PRODUCT DESCRIPTION
150 Watts Single Output Series
150 Watts Single Output Series
150 Watts Single Output Series
MODEL | IT-EMC-150PFC-12 | IT-EMC-150PFC-15 | IT-EMC-150PFC-24 | IT-EMC-150PFC-48 | ||
---|---|---|---|---|---|---|
OUTPUT | DC Output | 12V | 15V | 24V | 48V | |
Rated Current | 12.5A | 10A | 6.3A | 3.2A | ||
Current Range Note 1 | 0~12.5A | 0~10A | 0~6.3A | 0~3.2A | ||
Ripple and Noise Note 2 | 0~70ā | ā¤100mV | ā¤100mV | ā¤100mV | ā¤100mV | |
.-20~0ā | ā¤200mV | ā¤200mV | ā¤200mV | ā¤200mV | ||
Voltage ADJ. Range | 10.8~13.2V | 13.5~16.5V | 21.6~26.4V | 43.2~52.8V | ||
Voltage Accuracy | Ā±2.0% | Ā±2.0% | Ā±2.0% | Ā±2.0% | ||
Line Regulation | Ā±0.5% | Ā±0.5% | Ā±0.5% | Ā±0.5% | ||
Load Regulation | Ā±2.0% | Ā±2.0% | Ā±1.0% | Ā±1.0% | ||
Set-up Time | ā¤3S /115Vac ļ¼ ā¤2S /230Vac full load | |||||
Hold up Time | ā„10mS (220Vac input, Full load) | |||||
Temperature Coefficient | Ā±0.03%/ā | |||||
Overshoot and Undershoot | <5.0% | |||||
INPUT | Voltage Range | 90Vac~264Vac, 120~370Vdc | ||||
Frequency Range | 47Hz~63Hz | |||||
Power factor (typical) | PF ļ¼ 0.98@115Vac, PF ļ¼ 0.95@230Vac | |||||
Efficiency (Typical) | 230Vac input | ā„86% | ā„87% | ā„88% | ā„88% | |
115Vac input | ā„82.5% | ā„82.5% | ā„85% | ā„83.9% | ||
AC Current (max.) | ļ¼ 2 A | |||||
Inrush Current (Typical) | ļ¼ 30A/115Vac,<45A/230Vac Cold start | |||||
Leakage Current | Inputāoutput: ā¤0.25mA InputāPG: ā¤3.5mA (input 264Vac, 63Hz) | |||||
PROTECTION | Over Load | 13.125~18.75A | 10.5~17A | 6.93~9.45A | 3.36~4.8A | |
Protection type: Hiccup mode, auto recovery | ||||||
Over power | 160~225W | 160~255W | 160~225W | 160~225W | ||
Protection type: Hiccup mode, auto recovery | ||||||
Over Voltage | 14~18V | 17.8~22.5V | 27~36V | 52.5~72V | ||
Protection type: Hiccup mode, auto recovery | ||||||
Over Temperature | 105ā+5ā(detect on Mosfet temperature);shut down, auto recovery after the temperature goes down to 50ā | |||||
Short Circuit | Long-term mode, auto recovery | |||||
ENVIRONMENT | Operating amb. Temp. & Hum. | .-20ā~70ā; 20%~90%RH No condensing (refer to the derating curve) | ||||
Storage Temp. & Hum. | .-30ā~85ā; 10%~95%RH No condensing | |||||
SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed) ;EN60950-1:2006 | ||||
Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac/10mA .Primary-PG:1.5KVac/10mA. Secondary-PG: 0.5KVDC/ 10mA. | ||||
Isolation Resistance | 10M ohms | |||||
EMS Emission | Compliance to EN55022 Class B | |||||
Harmonic Current | Compliance to EN61000-3-2, Class D | |||||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; heavy industry level | |||||
OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25ā, Full load) | ||||
Dimension (L*W*H) | 160Ć99Ć38mm | |||||
Packing | 20PCS/CTN, 14KGS, 0.04CBM | |||||
Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25ā of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12ā twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
With 6 high power LEDs for a total power consumption of 11W, beam angle 15Ā° to 90Ā°, beam distance 60m to 8m,the IT-SSD6-WL is a high service of life Camera Housing with built-in White Light Illuminator.
The IT-SSD6-WL is part of the High-Power Camera Housing with built-in White Light Illuminator series that is the quality LED light source solution for night-time illumination, providing high-power light for CCTV and IP cameras to enhance night-time visual performance with colorful images.
360 Watts Single Output Industrial DIN Rail Power Supply Series
4-ports 10/100Base-T(x) (POE) + 2-ports Gigabit Combo.
IT-IPS-316-IU-2GC-4-POE Ā is an industrial grade, unmanaged Ethernet switch. The switch provides 4 ports 10/100M Ethernet and 2 ports combo Gigabit SFP slots or 10/100/1000Base-T(X) ports, which 4 ports Ethernet supports POE function (IEEE802.3af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The -40ļ½75ā working temperature, can meet all kinds of Industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.