IT-DIN-75S

PRODUCT DESCRIPTION

75 Watts Single Output Industrial DIN Rail Power Supply

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

TECHNICAL SPECIFICATIONS

MODEL			IT-DIN-75S-24
OUTPUT	DC Output		24V
	Rated Current		3.2A
	Current Range Note 1		0~3.2A
	Ripple and Noise	0~70℃	≤120mV
	Note 2	.-20℃	≤240mV
	Voltage ADJ. Range		24~28V
	Voltage Accuracy		±1.0%
	Line Regulation		±0.5%
	Load Regulation		±1.0%
	Set-up Time		<1.2S@230Vac; <2.5mS@115Vac
	Hold up Time		≥10mS@115Vac; ≥20mS@230Vac Full load
	Temperature Coefficient		±0.03%/℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		90Vac~264Vac
	Frequency Range		47Hz~63Hz
	Efficiency ( Typical)		0.88
	AC Current (max.)		<1.4A/115VAC; <0.7A/230VAC
	Inrush Current (Typical)		20A/115Vac ; 35A/230Vac Cold start
	Leakage Current		Input—output:<0.25mA Input—PG:<3.5mA
	Over Load		110%~150% of rated current, constant current
PROTECTION	Over voltage		29~33V, shut down, re-power on.
	Over temperature		100±5℃, detect on heat sink of power transistor; shut down O/P, re-power on.
	Short Circuit		Long-term mode, auto recovery
	Operating amb. Temp. & Hum.		.-20℃~70℃; 20%~90%RH No condensing
ENVIRONMENT	Storage Temp. & Hum.		.-40℃~85℃; 5%~95%RH No condensing
	Safety Standards		meet UL508, UL60950, EN60950
SAFETY &EMC	Withstand Voltage		Primary-Secondary: 3.0KVac; ≤10mA. Primary-PG:2KVac; ≤10mA. Secondary-PG:0.5KVac≤10mA.
Note 3	Isolation Resistance		≥100M ohms
	EMC Emission		Compliance to EN55022, EN55024, FCC PART 15 Class B (according to POWERLD test condition)
	Harmonic Current		Compliance to EN61000-3-2, CLASS A
	EMC Immunity		Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level
	MTBF (MIL-HDBK-217F)		More than 500,000Hrs (25℃, Full load)
	Dimension (WHD)		45124119mm
OTHERS	Packing		24pcs/CTN, 15.0Kg, 0.04cbm
	Cooling method		Cooling by free air convection
NOTE	1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
	2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.