Menu
≡
╳
Menu
≡
╳
V.35 to E1 (Framed E1) Converter
IT-7221-PC converter provides conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, can convert E1 channel of SDH, PDH, and other Optical Transmission Equipment or microwave, satellite Equipment to V.35 channel, Extend V.35 channel of DDN. Used widely in data communication networks, Connecting with V.35 interface of Routers and Optical Transmission Equipments without G.703 interface, realize match between different network equipments, and transparent to upper protocol layer.
E1 interface
Standard: Comply with ITU-T G.703
Output tingle displace: accord ITU-TG.735 advice
Input tingle limit: accord ITU-TG.823 advice
Output tingle: accord ITU-T G.823 advice
Frame format: framed
Interface rate: N×64Kbps (N=1~32)
CRC checkout: no
Port coding: HDB3
Port transmission: 600M
Port connector: 120 Ohm (RJ-45) and 75 ohm (BNC double coaxial)
V.35 interface
Standard: Comply with V.35 (DTE)
Clock: Line clock, Local clock
Port connector: M34 (Female)
Line code: NRZ
Clock selection: Internal clock, V.35 line clock, E1 recovery Clock
Test facility: Bite Local& remote loop test
Environment, Power and Dimension
Working temperature: 0 to 50°C
Storage temperature: -20 to 80°C
Humidity: Relative humidity 5% to 95%
Input power: 220VAC
Consumption: 3W
Power protection: From high voltage/short circuit
L×W×H: 140mm×210mm×42mm
Shell: metal shell
Warranty: 3 years
Approvals: FCC, CE, RoHS approvals
4-ports 10/100Base-T(x) (POE) + 1-port Gigabit Combo.
IT-IPS-315-IM-1GC-4-POE is an industrial grade, unmanaged PoE switch. The switch provides 4 ports 10/100M Ethernet and 1 ports combo Gigabit SFP slots or 10/100/1000Base-T(X) ports, which 4 ports Ethernet supports POE function (IEEE8023af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x/ with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, the -40～75℃ working temperature, can meet all kinds of Industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.
With 10 high power LEDs for a total power consumption of 20W, beam angle 15° to 90°, beam distance 40m to 5m, the IT-SHZ33-A-WL is a high service of life Camera Housing with built-in White Light Illuminator.
The IT-SHZ33-A-WL is part of the High-Power Camera Housing with built-in White Light Illuminator series that is the quality LED light source solution for night-time illumination, providing high-power light for CCTV and IP cameras to enhance night-time visual performance with colorful images.
4-ports 10/100Base-T(x) (POE) + 4-ports 10/100Base-T(x).
IT-IPS-618-IM-4-POE is an industrial grade, managed and redundancy Ethernet switch. The switch provides 8 ports 10/100M Ethernet and 4 ports 10/100M Ethernet PoE, which 4 ports Ethernet supports POE function (IEEE 802.3af/at). It provided some kinds of advanced network managed function, like as: SW-Ring™ redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring and fault alarm. SW-Ring™ can bring your Ethernet to intelligent redundancy. The -40～75℃ working temperature, can meet all kinds of Industrial environment requirement and provide the solution of the economy.
4-ports 10/100M Base-T(x) PoE + 1-port 10/100M Base-T(x).
The IT-IPS-215-IU-4-POE switch is a kind of unmanaged industrial PoE switch, it support 5 10/100Base-T(X) ports. The 4 Fast Ethernet port (1~4) support Power-over -Ethernet (PoE) function. The switches are classified as power source equipment (PSE), and when used in this way, the IT-IPS-215-IU-4-POE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
It support CE, FCC standard, IT-IPS-215-IU-4-POE adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input (48VDC). The switch support IEEE802.3/ IEEE802.3u/ IEEE802.3x with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing reliable and economic solution for your industrial Ethernet network
SideBarMenu
≡
╳
Intellisystem Technologies S.r.l. - © All Rights Reserverd 2003-2021
Italiano
RSS - Posts