IT-PoEP-4P
4 Port POE Switch for Illuminators installations in any places easily, efficiently and cost-effectively.
- Max 60W 4-Port POE Switch.
Description
Features
- Up to 15.4W of Power on.
- Complies to IEEE 802.3af POE standard and is backward.
- Compatible with All IEEE 802.3af or Legacy.
- Safe: low power devices receive only the power they need.
- Safe and reliable power to WLAN access points.
- Automatic detection and protection of non-standard Ethernet terminals.
- Supports 10/100 base-T applications.
- Compact design fits easily in WLAN access.
- Plug-and-play no configuration required.
- Internal power supply.
- Save up to 83% power with green technology.
Description
It’s easy to connect with data and power over Ethernet from one unit, the PoE Switch reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
Model | IT-PoEP-4P |
---|---|
Hardware Specifications | |
10/100Mbps Copper Ports | 5*10/100m 4Port PoE |
LED | Power (Green) |
PoE In-Use (Orange) | |
10/100 LNK/ACT (Green) | |
Dimensions (W*D*H) | 185*118*44mm, 1U height |
Weight | 0.70 kg |
Power Requirement | 100-240V AC, 50-60 Hz |
Power Consumption | 65 Watts maximum |
Power over Ethernet | |
PoE Standard | IEEE 802.3af |
PoE Power Output | 48VDC, Max. 15.4W |
PoE Power Supply Type | 1/2(+), 3/6(-), Mode-A, End-Span |
PoE Power Budget | System: 65W; PoE: Max. 60W |
Standards Conformance | |
Regulation Compliance | FCC Part 15 Class B, CE |
Standards Compliance | IEEE 802.3: 10Base-T |
IEEE 802.3u: 100Base-TX | |
IEEE 802.3x: Flow Control | |
Environmental | |
Operating | Temperature: 0-50 Degree C |
Relative Humidity: 20-95% | |
Storage | Temperature: -10-70 Degree C |
Relative Humidity: 20-95% (non-condensing) |
You must belogged in to post a comment.