Italiano
IT-EMC-35S Series
35 Watts Single Output Series
- No Load power consumption<0.5W
- Universal AC input range
- Miniature size, high power density, high efficiency, long life and high reliability
- Withstand 300VA surge input for 5 sec.
- Output protections: OLP/OPP/SCP
- Wide operating ambient temp (-20℃~70℃)
- Operating altitude up to 5000M
- All using 105℃ long life electrolytic capacitors.
- 100% full load burn-in test
- Easy assembling from top side
- PCB soldering side with conformal coating
- Suitable for critical applications
- 3 years warranty
- Description
- Technical Specifications
- Block Diagrams
- Graphs & Curves
- Mechanical Drawings
- Download / Documentation
- Contact US / Requests
Description
35 Watts Single Output Series
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
TECHNICAL SPECIFICATIONS
| MODEL | IT-EMC-35S-5 | IT-EMC-35S-12 | IT-EMC-35S-15 | ||
|---|---|---|---|---|---|
| OUTPUT | DC Output | 5V | 12V | 15V | |
| Rated Current | 6A | 3A | 2.4A | ||
| Current Range | 0~6A | 0~3A | 0~2.4A | ||
| Ripple and Noise Note 2 | 0~70℃ | <50mV | <80mV | <120mV | |
| .-25~0℃ | <80mV | <180mV | <200mV | ||
| Voltage ADJ. Range | -5%~+10% of rated output voltage | ||||
| Voltage Accuracy | ±3.0% | ±3.0% | ±3.0% | ||
| Line Regulation | ±0.5% | ±0.5% | ±0.5% | ||
| Load Regulation | ±1.0% | ±1.0% | ±1.0% | ||
| Set-up Time | ＜ 1S (230Vac input, Full load); | ||||
| Hold up Time | ＞ 20mS (230Vac input, Full load); ＞ 10mS (120Vac input, Full load) | ||||
| Temperature Coefficient | ±0.03%/℃ | ||||
| Overshoot and Undershoot | <5.0% | ||||
| INPUT | Voltage Range | 90Vac~264Vac ， 127~370Vdc | |||
| Frequency Range | 47Hz~63Hz | ||||
| Efficiency | 115Vac input | 0.79 | 0.83 | 0.85 | |
| ( Typical) | 230Vac input | 0.8 | 0.84 | 0.86 | |
| AC Current (max.) | <1A(max) | ||||
| Inrush Current (Typical) | <50A@230Vac Cold start | ||||
| Leakage Current | Input—output:<3.5mA Input—PG:<0.25mA | ||||
| PROTECTION | Over Load | 105%~150% of rated output current, constant power,auto recovery | |||
| Over Voltage | 105%~150% of rated output voltage, Constant Voltage | ||||
| Short Circuit | Long-term mode, auto recovery | ||||
| ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | |||
| Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | ||||
| SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed); EN60950-1:2006 | |||
| Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA. Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤ 10mA. | |||
| Isolation Resistance | ≥100M ohms | ||||
| EMC Emission | Compliance to EN55022, EN55024 ClassB | ||||
| Harmonic Current | Compliance to EN61000-3-2,-3 | ||||
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, EN61000-6-2 heavy industry level | ||||
| OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | |||
| Dimension (L*W*H) | 101.6×63.5×33mm | ||||
| Packing | 60PCS/CTN, 15.18KGS, 0.06CBM | ||||
| Cooling method | Cooling by free air convection |
| MODEL | IT-EMC-35S-24 | IT-EMC-35S-48 | ||
|---|---|---|---|---|
| OUTPUT | DC Output | 24V | 48V | |
| Rated Current | 1.5A | 0.76A | ||
| Current Range | 0~1.5A | 0~0.76A | ||
| Ripple and Noise Note 2 | 0~70℃ | <120mV | <180 mV | |
| .-25~0℃ | <200mV | <240mV | ||
| Voltage ADJ. Range | -5%~+10% of rated output voltage | |||
| Voltage Accuracy | ±3.0% | ±3.0% | ||
| Line Regulation | ±0.5% | ±0.5% | ||
| Load Regulation | ±1.0% | ±1.0% | ||
| Set-up Time | ＜ 1S (230Vac input, Full load); | |||
| Hold up Time | ＞ 20mS (230Vac input, Full load); ＞ 10mS (120Vac input, Full load) | |||
| Temperature Coefficient | ±0.03%/℃ | |||
| Overshoot and Undershoot | <5.0% | |||
| INPUT | Voltage Range | 90Vac~264Vac ， 127~370Vdc | ||
| Frequency Range | 47Hz~63Hz | |||
| Efficiency | 115Vac input | 0.86 | 0.87 | |
| ( Typical) | 230Vac input | 0.87 | 0.88 | |
| AC Current (max.) | <1A(max) | |||
| Inrush Current (Typical) | <50A@230Vac Cold start | |||
| Leakage Current | Input—output:<3.5mA Input—PG:<0.25mA | |||
| PROTECTION | Over Load | 105%~150% of rated output current, constant power,auto recovery | ||
| Over Voltage | 105%~150% of rated output voltage, Constant Voltage | |||
| Short Circuit | Long-term mode, auto recovery | |||
| ENVIRONMENT | Operating amb. Temp. & Hum. | .-25℃~70℃; 20%~90%RH No condensing (refer to the derating curve) | ||
| Storage Temp. & Hum. | .-40℃~85℃; 10%~95%RH No condensing | |||
| SAFETY &EMC | Safety Standards | UL60950-1 2 nd Ed; IEC 60950-1:2005(2 nd Ed); EN60950-1:2006 | ||
| Note 3 | Withstand Voltage | Primary-Secondary: 3.0KVac; ≤10mA. Primary-PG: 1.5KVac; ≤10mA. Secondary-PG: 0.5KVDC; ≤ 10mA. | ||
| Isolation Resistance | ≥100M ohms | |||
| EMC Emission | Compliance to EN55022, EN55024 ClassB | |||
| Harmonic Current | Compliance to EN61000-3-2,-3 | |||
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, EN61000-6-2 heavy industry level | |||
| OTHERS | MTBF (MIL-HDBK-217F) | More than 200,000Hrs (25℃, Full load) | ||
| Dimension (L*W*H) | 101.6×63.5×33mm | |||
| Packing | 60PCS/CTN, 15.18KGS, 0.06CBM | |||
| Cooling method | Cooling by free air convection |
NOTES:
1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
Warning: Undefined variable $user_ID in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/comments.php on line 83
You must belogged in to post a comment.