IT-DIN-120S Series

120 Watts Single Output Industrial DIN Rail Power Supply Series

Universal AC input range(90~264Vac)
High efficiency up to 89%
Built-in current limiting circuit
Output protections: OVP/OLP/SCP/OTP
Wide operating ambient temp (-20℃~70℃)
Built-in DC OK function
Can be installed on TS-35/7.5 or TS-35/15
100% full load burn-in test
Suitable for critical applications
Operating altitude up to 6000m
PCB with conformal coating
Ultra-slim,45mm width
3 years warranty

Categories: Industrial Power Supply, DIN Rails, Products Tags: 10~70℃, 10A, 12~14V, 120 Watts, 124*119*45mm, 12V, 2.5A, 24~28V, 24V, 47Hz~63Hz, 48~56V, 48V, 5A, DIN Rail, Single Output

Description

120 Watts Single Output Industrial DIN Rail Power Supply Series

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

TECHNICAL SPECIFICATIONS

MODEL			T-DIN-120S-12	T-DIN-120S-24	T-DIN-120S-48
OUTPUT	DC Output		12V	24V	48V
	Rated Current		10A	5A	2.5A
	Current Range Note 1		0~10A	0~5A	0~2.5A
	Ripple and Noise	0~70℃	≤120mV	≤120mV	≤240mV
	Note 2	.-20℃~0	≤240mV	≤240mV	≤480mV
	Voltage ADJ. Range		12~14V	24~28V	48~56V
	Voltage Accuracy		±1.0%
	Line Regulation		±0.5%
	Load Regulation		±1.0%
	Set-up Time		<1.2S@230Vac ; <3.0mS@115Vac
	Hold up Time		≥10mS@115Vac; ≥20mS@230Vac Full load
	Temperature Coefficient		±0.03%/℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		90Vac~264Vac, 127Vdc-370Vdc
	Frequency Range		47Hz~63Hz
	Efficiency ( Typical)		0.85	0.88	0.89
	AC Current (max.)		<2.7 A/115VAC ; <1.35A/230VAC

	Inrush Current (Typical)		20A/115Vac ; 35A/230Vac Cold start
	Leakage Current		Input—output:<0.25mA Input—PG:<3.5mA (264Vac input, 63Hz)
PROTECTION	Over Load		10.5~13A	5.25~6.5A	2.75~3.25A
			Protection type: Constant current
	Over voltage		15~18V	29~33V	58~63V
			Protection type: Shut down, re-power on.
	Over temperature		100±5℃, detect on heat sink of power transistor; shut down O/P, re-power on.
	Short Circuit		Long-term mode, auto recovery
	Operating amb. Temp. & Hum.		.-20℃~70℃; 20%~90%RH No condensing (pls refer to derating curve)
ENVIRONMENT	Storage Temp. & Hum.		.-40℃~85℃; 5%~95%RH No condensing
	Safety Standards		UL508, UL60950, EN60950
SAFETY &EMC	Withstand Voltage		Primary-Secondary: 3.0KVac/10mA .Primary-PG: 1.5KVac/10mA. Secondary-PG: 0.5KVac/10mA.
Note 3	Isolation Resistance		10M ohms
	EMC Emission		Compliance to EN55022, EN55024, FCC PART 15 Class B
	Harmonic Current		Compliance to EN61000-3-2, CLASS A
	EMC Immunity		Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level
	MTBF (MIL-HDBK-217F)		More than 500,000Hrs (25℃, Full load)
OTHERS	Dimension (LWH)		12411945mm
	Packing		24pcs/CTN,15.0Kg, 0.04cbm
	Cooling method		Cooling by free air convection

NOTE	1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
	2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.